Datasheet CAP400DG (Power Integrations) - 2
| Hersteller | Power Integrations |
| Beschreibung | Zero Loss Automatic X Capacitor Rapid Discharge IC in SO-8 package |
| Seiten / Seite | 7 / 2 — CAP400DG. Pin Functional Description. D Package (SO-8). Key Application … |
| Dateiformat / Größe | PDF / 698 Kb |
| Dokumentensprache | Englisch |
CAP400DG. Pin Functional Description. D Package (SO-8). Key Application Considerations. Breakdown Voltage Selection. PRELIMINARY
Modelllinie für dieses Datenblatt
Textversion des Dokuments
CAP400DG Pin Functional Description
The pin configuration shown in Figure 3 ensures that the width of the SO-8 package is used to provide a creepage and clearance distance of greater than 4 mm.
D Package (SO-8)
Although electrical connections are only made to pins 2, 3, 6 and 7, it
1 8 NC NC
is recommended that pins 1-4 and pins 5-8 are connected together
2 7
on the PCB in two groups – see Key Applications section.
D1 D2 3 6 Key Application Considerations D1 D2 4 5 Breakdown Voltage Selection NC NC
The CAP400DG device has a breakdown voltage of 900 V. In any instance the voltage on CAP400DG should not exceed 900 V. MOV should be added to provide adequate protection against differential PI-5608-020515 surge. Recommend to add MOV after the fuse (Figure 4). This will clamp the differential surge voltage upon entry to the circuit. Figure 3. Pin Configuration. R1
CAP400DG
D1 Other EMI
AC
MOV1 Filter Components X Capacitor 1 X Capacitor 2 D2 R2 PI-7508c-031226 Figure 4. Placement of MOV, CAP400DG, and X capacitor.
2 PRELIMINARY
Rev. A 06/26 www.power.com
The pin configuration shown in Figure 3 ensures that the width of the SO-8 package is used to provide a creepage and clearance distance of greater than 4 mm.
D Package (SO-8)
Although electrical connections are only made to pins 2, 3, 6 and 7, it
1 8 NC NC
is recommended that pins 1-4 and pins 5-8 are connected together
2 7
on the PCB in two groups – see Key Applications section.
D1 D2 3 6 Key Application Considerations D1 D2 4 5 Breakdown Voltage Selection NC NC
The CAP400DG device has a breakdown voltage of 900 V. In any instance the voltage on CAP400DG should not exceed 900 V. MOV should be added to provide adequate protection against differential PI-5608-020515 surge. Recommend to add MOV after the fuse (Figure 4). This will clamp the differential surge voltage upon entry to the circuit. Figure 3. Pin Configuration. R1
CAP400DG
D1 Other EMI
AC
MOV1 Filter Components X Capacitor 1 X Capacitor 2 D2 R2 PI-7508c-031226 Figure 4. Placement of MOV, CAP400DG, and X capacitor.
2 PRELIMINARY
Rev. A 06/26 www.power.com