Datasheet ASMT-Jx1x (Avago Technologies) - 4

HerstellerAvago Technologies
Beschreibung1 W Mini Power LED Light Source
Seiten / Seite16 / 4 — Device Selection Guide (TJ = 25. Luminous Flux (lm) / Radiometric Power. …
Dateiformat / GrößePDF / 470 Kb
DokumentenspracheEnglisch

Device Selection Guide (TJ = 25. Luminous Flux (lm) / Radiometric Power. Electrically. (mW), ΦV [1,2]. Test Current. Dice. Isolated

Device Selection Guide (TJ = 25 Luminous Flux (lm) / Radiometric Power Electrically (mW), ΦV [1,2] Test Current Dice Isolated

Modelllinie für dieses Datenblatt

Textversion des Dokuments

Device Selection Guide (TJ = 25
°
C) Luminous Flux (lm) / Radiometric Power Electrically (mW), ΦV [1,2] Test Current Dice Isolated Part Number Color Min. Typ. Max. (mA) Technology Metal Slug
ASMT-JR10-AST01 Red 51.7 62.0 87.4 350 AllnGaP No ASMT-JA10-ARS01 Amber 39.8 48.0 67.2 350 AllnGaP No ASMT-JH10-ARS01 Red Orange 39.8 48.0 67.2 350 AllnGaP No ASMT-JB11-NNQ01 Blue 18.1 24.0 39.8 350 InGaN Yes ASMT-JL11-NNQ01 Royal Blue 275 mW 355 mW 515 mW 350 InGaN Yes ASMT-JL11-NPR01 355mW 515mW 635mW 350 InGaN Yes ASMT-JC11-NTU01 Cyan 67.2 75.0 99.6 350 InGaN Yes ASMT-JG11-NUW01 Green 87.4 110.0 129.5 350 InGaN Yes ASMT-JW11-NWX01 Cool White 113.6 120.0 147.7 350 InGaN Yes ASMT-JN11-NWX01 Neutral White 113.6 120.0 147.7 350 InGaN Yes ASMT-JY11-NVW01 Warm White 99.6 105.0 129.5 350 InGaN Yes Notes: 1. ΦV is the total luminous flux / radiometric power output as measured with an integrating sphere at 25 ms mono pulse condition. 2. Flux tolerance is ±10%.
Absolute Maximum Ratings Parameter AllnGaP InGaN InGaN Cyan Units
DC Forward Current [1] 500 500 500 mA Peak Pulsing Current [2] 1000 1000 1000 mA Power Dissipation 1230 1830 1980 mW LED Junction Temperature 125 150 150 °C Operating Metal Slug Temperature Range at 350 mA -40 to +115 -40 to +135 -40 to +135 °C Storage Temperature Range -40 to +120 -40 to +120 -40 to +120 °C Soldering Temperature See Figure 26 Reverse Voltage [3] Not recommended Notes: 1. Derate linearly based on Figure 10 for AlInGaP and Figure 22 for InGaN. 2. Pulse condition duty factor = 10%, Frequency = 1 kHz. 3. Not designed for reverse bias operation. 4