Datasheet Texas Instruments OPA830IDBVRG4 — Datenblatt
| Hersteller | Texas Instruments |
| Serie | OPA830 |
| Artikelnummer | OPA830IDBVRG4 |
Single-Supply-Operationsverstärker mit geringem Stromverbrauch 5-SOT-23 -40 bis 85
Datenblätter
Low-Power, Single-Supply, Wideband Operational Amplifier datasheet
PDF, 843 Kb, Revision: F, Datei veröffentlicht: Aug 28, 2008
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 5 |
| Package Type | DBV |
| Industry STD Term | SOT-23 |
| JEDEC Code | R-PDSO-G |
| Width (mm) | 1.6 |
| Length (mm) | 2.9 |
| Thickness (mm) | 1.2 |
| Pitch (mm) | .95 |
| Max Height (mm) | 1.45 |
| Mechanical Data | Herunterladen |
Parameter
| 2nd Harmonic(dBc) | 67 |
| 3rd Harmonic(dBc) | 60 |
| @ MHz | 5 |
| Acl, min spec gain(V/V) | 1 |
| Additional Features | N/A |
| Approx. Price (US$) | 1.02 | 1ku |
| Architecture | Bipolar Voltage FB |
| BW @ Acl(MHz) | 310 |
| CMRR(Min)(dB) | 76 |
| CMRR(Typ)(dB) | 80 |
| GBW(Typ)(MHz) | 310 |
| Input Bias Current(Max)(pA) | 10000000 |
| Iq per channel(Max)(mA) | 4.7 |
| Iq per channel(Typ)(mA) | 4.25 |
| Number of Channels(#) | 1 |
| Offset Drift(Typ)(uV/C) | 25 |
| Operating Temperature Range(C) | -40 to 85 |
| Output Current(Typ)(mA) | 80 |
| Package Group | SOT-23 |
| Package Size: mm2:W x L (PKG) | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) |
| Rail-to-Rail | In to V- Out |
| Rating | Catalog |
| Slew Rate(Typ)(V/us) | 600 |
| Total Supply Voltage(Max)(+5V=5, +/-5V=10) | 11 |
| Total Supply Voltage(Min)(+5V=5, +/-5V=10) | 2.8 |
| Vn at Flatband(Typ)(nV/rtHz) | 9.2 |
| Vos (Offset Voltage @ 25C)(Max)(mV) | 7 |
Öko-Plan
| RoHS | Not Compliant |
| Pb Free | No |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: DEM-OPA-SOT-1A
Unpopulated PCB Compatible w/High Speed, Wide Bandwidth Op Amps in SOT(DBV) Pkg
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: DEM-OPA-SO-1A
DEM-OPA-SO-1A Unpopulated PCB Compatible w/High Speed Wide Bandwidth Op Amps in 8-lead SOIC (D) Pkg
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Importing a SPICE Netlist into TINA7-TI (Rev. A)PDF, 219 Kb, Revision: A, Datei veröffentlicht: Jul 28, 2012
- RLC Filter Design for ADC Interface Applications (Rev. A)PDF, 299 Kb, Revision: A, Datei veröffentlicht: May 13, 2015
As high performance Analog-to-Digital Converters (ADCs) continue to improve in their performance, the last stage interface from the final amplifier into the converter inputs becomes a critical element in the system design if the full converter dynamic range is desired. This application note describes the performance and design equations for a simple passive 2nd-order filter used successfully in AD - Wideband Complementary Current Output DAC Single-Ended InterfacePDF, 597 Kb, Datei veröffentlicht: Jun 21, 2005
High-speed digital-to-analog converters (DACs) most often use a transformer-coupled output stage. In applications where this configuration is not practical, a single op ampdifferential to single-ended stage has often been used. This application note steps through the exact design equations required to achieve gain matching from each output as well as a matched input impedance to each of the DA - ADS5500, OPA695: PC Board Layout for Low Distortion High-Speed ADC DriversPDF, 273 Kb, Datei veröffentlicht: Apr 22, 2004
Once an analog-to-digital converter (ADC) and a driver/interface have been selected for a given application, the next step to achieving excellent performance is laying out the printed circuit board (PCB) that will support the application. This application report describes several techniques for optimizing a high-speed, 14-bit performance, differential driver PCB layout using a wideband operation - Measuring Board Parasitics in High-Speed Analog DesignPDF, 134 Kb, Datei veröffentlicht: Jul 7, 2003
Successful circuit designs using high-speed amplifiers can depend upon understanding and identifying parasitic PCB components. Simulating a design while including PCB parasitics can protect against unpleasant production surprises. This application report discusses an easy method for measuring parasitic components in a prototype or final PC board design by using a standard oscilloscope and low freq - Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, Revision: A, Datei veröffentlicht: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
Modellreihe
Serie: OPA830 (8)
- OPA830ID OPA830IDBVR OPA830IDBVRG4 OPA830IDBVT OPA830IDBVTG4 OPA830IDG4 OPA830IDR OPA830IDRG4
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)