Datasheet PIC10F200, PIC10F202, PIC10F204, PIC10F206 (Microchip) - 32
| Hersteller | Microchip |
| Beschreibung | 6-Pin, 8-Bit Flash Microcontrollers |
| Seiten / Seite | 88 / 32 — PIC10F200/202/204/206. 8.1 Comparator Configuration The on-board … |
| Dateiformat / Größe | PDF / 1.0 Mb |
| Dokumentensprache | Englisch |
PIC10F200/202/204/206. 8.1 Comparator Configuration The on-board comparator inputs, (GP0/CIN+, GP1/
Modelllinie für dieses Datenblatt
- PIC10F200-E/MC PIC10F200-E/OT PIC10F200-E/P PIC10F200-I/MC PIC10F200-I/OT PIC10F200-I/P PIC10F200T-E/OT PIC10F200T-E/OTVAO PIC10F200T-I/MC PIC10F200T-I/OT PIC10F200T-I/OTVAO
- PIC10F202-E/MC PIC10F202-E/OT PIC10F202-E/P PIC10F202-I/MC PIC10F202-I/OT PIC10F202-I/P PIC10F202T-E/OT PIC10F202T-E/OTVAO PIC10F202T-I/MC PIC10F202T-I/OT PIC10F202T-I/OTVAO
Textversion des Dokuments
PIC10F200/202/204/206
8.1 Comparator Configuration The on-board comparator inputs, (GP0/CIN+, GP1/
CIN-), as well as the comparator output (GP2/COUT),
are steerable. The CMCON0, OPTION and TRIS
registers are used to steer these pins (see Figure 8-1).
If the Comparator mode is changed, the comparator
output level may not be valid for the specified mode
change delay shown in Table 12-1. FIGURE 8-1: Note: The comparator can have an inverted
output (see Figure 8-1). BLOCK DIAGRAM OF THE COMPARATOR
T0CKI/GP2/COUT CPREF
C+ COUTEN + C-COUT (Register)
-Band Gap Buffer
(0.6V)
CNREF POL
CMPON
T0CKI
T0CKI Pin
T0CKSEL CWU
Q D S
CWUF TABLE 8-1: Read
CMCON TMR0 CLOCK SOURCE
FUNCTION MUXING T0CS CMPT0CS COUTEN Source 0 x x Internal Instruction
Cycle 1 0 0 CMPOUT 1 0 1 CMPOUT 1 1 0 CMPOUT 1 1 1 T0CKI DS40001239F-page 32 2004-2014 Microchip Technology Inc.
8.1 Comparator Configuration The on-board comparator inputs, (GP0/CIN+, GP1/
CIN-), as well as the comparator output (GP2/COUT),
are steerable. The CMCON0, OPTION and TRIS
registers are used to steer these pins (see Figure 8-1).
If the Comparator mode is changed, the comparator
output level may not be valid for the specified mode
change delay shown in Table 12-1. FIGURE 8-1: Note: The comparator can have an inverted
output (see Figure 8-1). BLOCK DIAGRAM OF THE COMPARATOR
T0CKI/GP2/COUT CPREF
C+ COUTEN + C-COUT (Register)
-Band Gap Buffer
(0.6V)
CNREF POL
CMPON
T0CKI
T0CKI Pin
T0CKSEL CWU
Q D S
CWUF TABLE 8-1: Read
CMCON TMR0 CLOCK SOURCE
FUNCTION MUXING T0CS CMPT0CS COUTEN Source 0 x x Internal Instruction
Cycle 1 0 0 CMPOUT 1 0 1 CMPOUT 1 1 0 CMPOUT 1 1 1 T0CKI DS40001239F-page 32 2004-2014 Microchip Technology Inc.