Document 284-1 SMT Power Inductors - DO5010H Series AEC • Irms ratings up to 15 A; saturation currents up to 30 A Q200 85 + °C • Heavy gauge wire for low DC resistance Designer’s Kit C355 contains 3 of each part Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant tin-silver over copper. Other terminations available at additional cost. Weight 3.2 – 4.0 g Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Packaging 250 per 13″ reel Plastic tape: 32 mm wide, 0.38 mm thick, 24 mm pocket spacing, 7.8 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. DCR SRF 1. When ordering, please specify termination and packaging codes: Inductance 2 maxtyp 3 Isat 4 Irms 5 Part Number 1 ±20% (µH)(mOhm) (MHz)(A)(A)DO5010H-105MLD DO5010H-781ML_ 0.78 2.6 156 30 15 Termination: L = RoHS compliant tin-silver over copper. DO5010H-152ML_ 1.5 4.0 100 25 15 Special order:T = RoHS tin-silver-copper DO5010H-222ML_ 2.2 6.1 75 20 12 (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). DO5010H-332ML_ 3.3 8.6 60 17 10 Packaging: D = 13″