Datasheet MAX9700 (Maxim)

HerstellerMaxim
Beschreibung1.2W, Low-EMI, Filterless, Class D Audio Amplifier
Seiten / Seite17 / 1 — here. MAX9700. 1.2W, Low-EMI, Filterless,. Class D Audio Amplifier. …
Dateiformat / GrößePDF / 2.1 Mb
DokumentenspracheEnglisch

here. MAX9700. 1.2W, Low-EMI, Filterless,. Class D Audio Amplifier. General Description. Features. Ordering Information. TOP. PART

Datasheet MAX9700 Maxim

Modelllinie für dieses Datenblatt

Textversion des Dokuments

Click
here
for production status of specific part numbers.
MAX9700 1.2W, Low-EMI, Filterless, Class D Audio Amplifier General Description Features
The MAX9700 mono class D audio power amplifier ● Filterless Amplifier Passes FCC Radiated provides class AB amplifier performance with class D Emissions Standards with 100mm of Cable efficiency, conserving board space and extending battery ● Unique Spread-Spectrum Mode Offers 5dB life. Using a class D architecture, the MAX9700 Emissions Improvement Over Conventional Methods delivers 1.2W into an 8Ω load while offering efficiencies ● Optional External SYNC Input above 90%. A low-EMI modulation scheme renders the ● Simple Master-Slave Setup for Stereo Operation traditional class D output filter unnecessary. ● 94% Efficiency The MAX9700 offers two modulation schemes: a fixed- ● 1.2W into 8Ω frequency (FFM) mode, and a spread-spectrum (SSM) ● Low 0.01% THD+N mode that reduces EMI-radiated emissions due to the ● High PSRR (72dB at 217Hz) modulation frequency. Furthermore, the MAX9700 oscillator ● Integrated Click-and-Pop Suppression can be synchronized to an external clock through the ● Low Quiescent Current (4mA) SYNC input, allowing the switching frequency to be user ● Low-Power Shutdown Mode (0.1μA) defined. The SYNC input also allows multiple MAX9700s ● Short-Circuit and Thermal-Overload Protection to be cascaded and frequency locked, minimizing ● Available in Thermally Efficient, Space-Saving interference due to clock intermodulation. The device Packages utilizes a fully differential architecture, a full-bridged • 10-Pin TDFN (3mm x 3mm x 0.8mm) output, and comprehensive click-and-pop suppression. • 10-Pin μMAX The gain of the MAX9700 is set internally (MAX9700A: • 12-Bump UCSP (1.5mm x 2mm x 0.6mm) 6dB, MAX9700B: 12dB, MAX9700C: 15.6dB, MAX9700D: 20dB), further reducing external component count.
Ordering Information
The MAX9700 features high 72dB PSRR, a low 0.01%
TOP
THD+N, and SNR in excess of 90dB. Short-circuit and
PART TEMP RANGE PIN- PACKAGE MARK
thermal-overload protection prevent the device from MAX9700AETB+ -40°C to +85°C 10 TDFN-EP* ACM damage during a fault condition. The MAX9700 is available MAX9700AEUB+ -40°C to +85°C 10 µMAX — in 10-pin TDFN (3mm x 3mm x 0.8mm), 10-pin μMAX®, and 12-bump UCSP™ (1.5mm x 2mm x 0.6mm) packages. MAX9700AEBC+T -40°C to +85°C 12 UCSP — The MAX9700 is specified over the extended -40°C to MAX9700BETB+ -40°C to +85°C 10 TDFN-EP* ACI +85°C temperature range. MAX9700BEUB+ -40°C to +85°C 10 µMAX — MAX9700BEBC+T -40°C to +85°C 12 UCSP —
Applications
*EP = Exposed pad. ● Cellular Phones ● MP3 Players
Ordering Information continued and Selector Guide appears
● PDAs ● Portable Audio
at end of data sheet. Block Diagram Pin Configurations
VDD TOP VIEW VDD 1 10 PVDD IN+ 2 9 OUT- DIFFERENTIAL MODULATOR
MAX9700
AUDIO INPUT AND H-BRIDGE IN- 3 8 OUT+ GND 4 7 PGND SYNC OSCILLATOR SHDN 5 6 SYNC INPUT
MAX9700 TDFN/µMAX
Pin Configurations continued at end of data sheet. UCSP is a trademark of Maxim Integrated Products, Inc. μMAX is a registered trademark of Maxim Integrated Products, Inc. 19-3030; Rev 3; 3/18