Datasheet HMC464LP5E (Analog Devices) - 8
| Hersteller | Analog Devices |
| Beschreibung | GaAs PHEMT MMIC POWER AMPLIFIER, 2 - 20 GHz |
| Seiten / Seite | 9 / 8 — HMC464LP5E. GAAS PHEMT MMIC. POWER AMPLIFIER, 2 - 20 GHz. Pin … |
| Dateiformat / Größe | PDF / 1.2 Mb |
| Dokumentensprache | Englisch |
HMC464LP5E. GAAS PHEMT MMIC. POWER AMPLIFIER, 2 - 20 GHz. Pin Descriptions. Application Circuit
Modelllinie für dieses Datenblatt
Textversion des Dokuments
HMC464LP5E
v04.0218
GAAS PHEMT MMIC POWER AMPLIFIER, 2 - 20 GHz Pin Descriptions
Pin Number Function Description Interface Schematic This pin is AC coupled 5 RFIN and matched to 50 Ohms. T Gate Control for amplifier. Adjust between -2 to 0V 15 Vgg1 M to achieve Idd= 290 mA. S RF output for amplifier. Connect the DC 21 RFOUT & Vdd bias (Vdd) network to provide drain current (Idd). See application circuit herein. S - R IE Control voltage for amplifier. +3V should be applied to 30 Vgg2 Vgg2 for nominal operation. LIF P M Ground Paddle GND Ground paddle must be connected to RF/DC ground. 1 - 4, 6 - 14, R A No connection. These pins may be connected to RF ground. 16 - 20, 22 - 29, N/C E Performance will not be affected. 31, 32 W O P R & A E
Application Circuit
LIN NOTE 1: Drain Bias (Vdd) must be applied through a broadband bias tee or external bias network. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D
8
v04.0218
GAAS PHEMT MMIC POWER AMPLIFIER, 2 - 20 GHz Pin Descriptions
Pin Number Function Description Interface Schematic This pin is AC coupled 5 RFIN and matched to 50 Ohms. T Gate Control for amplifier. Adjust between -2 to 0V 15 Vgg1 M to achieve Idd= 290 mA. S RF output for amplifier. Connect the DC 21 RFOUT & Vdd bias (Vdd) network to provide drain current (Idd). See application circuit herein. S - R IE Control voltage for amplifier. +3V should be applied to 30 Vgg2 Vgg2 for nominal operation. LIF P M Ground Paddle GND Ground paddle must be connected to RF/DC ground. 1 - 4, 6 - 14, R A No connection. These pins may be connected to RF ground. 16 - 20, 22 - 29, N/C E Performance will not be affected. 31, 32 W O P R & A E
Application Circuit
LIN NOTE 1: Drain Bias (Vdd) must be applied through a broadband bias tee or external bias network. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D
8