Datasheet LT6554 (Analog Devices) - 3

HerstellerAnalog Devices
Beschreibung650MHz Gain of 1 Triple Video Buffer
Seiten / Seite12 / 3 — ELECTRICAL CHARACTERISTICS The. denotes the specifications which apply …
Dateiformat / GrößePDF / 171 Kb
DokumentenspracheEnglisch

ELECTRICAL CHARACTERISTICS The. denotes the specifications which apply over the full operating

ELECTRICAL CHARACTERISTICS The denotes the specifications which apply over the full operating

Modelllinie für dieses Datenblatt

Textversion des Dokuments

LT6554
ELECTRICAL CHARACTERISTICS The

denotes the specifications which apply over the full operating temperature range, otherwise specifications are at TA = 25
°
C. VS =
±
5V, RL = 1k, CL = 1.5pF, VEN = 0.4V, VAGND, VDGND = 0V. SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS
LSBW Large Signal Bandwidth VOUT = 2VP-P (Note 7) 270 400 MHz VOUT = 4VP-P (Note 7) 200 MHz All-Hostile Crosstalk f = 10MHz, VOUT = 2VP-P –90 dB f = 100MHz, VOUT = 2VP-P –60 dB tS Settling Time 0.1% of VFINAL, VSTEP = 2V 6 ns tR, tF Small-Signal Rise and Fall Time 10% to 90%, VOUT = 200mVP-P 550 ps dG Differential Gain (Note 8) 0.022 % dP Differential Phase (Note 8) 0.006 Deg HD2 2nd Harmonic Distortion f = 10MHz, VOUT = 2VP-P –82 dBc HD3 3rd Harmonic Distortion f = 10MHz, VOUT = 2VP-P –96 dBc
Note 1:
Absolute Maximum Ratings are those values beyond which the life
Note 6:
The two supply voltage settings for power supply rejection are of a device may be impaired. shifted from the typical ±VS points for ease of testing. The first
Note 2:
This parameter is guaranteed to meet specified performance measurement is taken at V+ = 3V, V– = –1.5V to provide the required 3V through design and characterization. It is not production tested. headroom for the enable circuitry to function with EN, DGND, AGND and
Note 3:
As long as output current and junction temperature are kept below all inputs connected to 0V. The second measurement is taken at V+ = 8V, the Absolute Maximum Ratings, no damage to the part will occur. V– = –4V. Depending on the supply voltage, a heat sink may be required.
Note 7:
Large signal bandwidth is calculated from the slew rate:
Note 4:
The LT6554C is guaranteed functional over the operating LSBW = SR/(π • VP-P) temperature range of –40°C to 85°C.
Note 8:
Differential gain and phase are measured using a Tektronix
Note 5:
The LT6554C is guaranteed to meet specified performance from TSG120YC/NTSC signal generator and a Tektronix 1780R video 0°C to 70°C. The LT6554C is designed, characterized and expected to measurement set. The resolution of this equipment is better than 0.05% meet specified performance from –40°C and 85°C but is not tested or QA and 0.05°. Nine identical amplifier stages were cascaded giving an sampled at these temperatures. The LT6554I is guaranteed to meet effective resolution of better than 0.0056% and 0.0056°. specified performance from –40°C to 85°C.
Note 9:
Slew rate is 100% production tested on the G channel. Slew rate of the R and B channels is guaranteed through design and characterization. 6554fa 3