Datasheet LT3964 (Analog Devices) - 4

HerstellerAnalog Devices
BeschreibungDual 36V Synchronous 1.6A Buck LED Driver with I2C
Seiten / Seite36 / 4 — ELECTRICAL. CHARACTERISTICS The. denotes the specifications which apply …
Dateiformat / GrößePDF / 3.8 Mb
DokumentenspracheEnglisch

ELECTRICAL. CHARACTERISTICS The. denotes the specifications which apply over the full operating

ELECTRICAL CHARACTERISTICS The denotes the specifications which apply over the full operating

Modelllinie für dieses Datenblatt

Textversion des Dokuments

LT3964
ELECTRICAL CHARACTERISTICS The
l
denotes the specifications which apply over the full operating temperature range, otherwise specifications are at TA = 25°C. VIN1 = 12V, VEN/UVLO = 5V, CTRL1 = CTRL2 = 2V, PWM1 = PWM2 = 2V unless otherwise noted. PARAMETER CONDITIONS MIN TYP MAX UNITS
FB1, FB2 OPENLED Threshold VFB – 43mV VFB – 53mV VFB – 63mV V FB1, FB2 SHORTLED Threshold l 250 270 mV FB1, FB2 Pin Input Bias Current Current Out of Pin, FB = 1V 20 200 nA Feedback Line Regulation 4V ≤ VIN1 ≤ 36V 0.001 %/V TSET Pin Voltage 630 mV TSET Pin Bias Current Current Out of Pin, TSET = 400mV 40 200 nA
Oscillator
RT Pin Voltage 0.96 V Switching Frequency RT = 357k l 186 200 214 kHz RT = 60.4k l 0.93 1.0 1.07 MHz RT = 27.4k l 1.86 2.0 2.14 MHz SYNC/CLKOUT Pin Resistance to GND 100 kΩ SYNC/CLKOUT Input High Threshold 1.5 V SYNC/CLKOUT Input Low Threshold 0.4 V SYNC/CLKOUT Output Duty Cycle CONFIG[6] = 1 (Clock Output Enabled) 30 50 70 % SYNC/CLKOUT Output Voltage High CONFIG[6] = 1 (Clock Output Enabled) 4 V SYNC/CLKOUT Output Voltage Low CONFIG[6] = 1 (Clock Output Enabled) 0.1 0.3 V SYNC/CLKOUT Output Rise Time CSYNC/CLKOUT = 50pF, CONFIG[6] = 1 (Clock 40 ns Output Enabled) SYNC/CLKOUT Output Fall Time CSYNC/CLKOUT = 50pF, CONFIG[6] = 1 (Clock 20 ns Output Enabled)
Logic
ALERT Output Low IALERT = 1mA 300 mV PWM1, PWM2 Input High Voltage l 1.18 1.3 V PWM1, PWM2 Input Low Voltage l 1.1 1.15 V PWM1, PWM2 Resistance to GND 280 kΩ
Power Switch
Top Switch On Resistance ISW = 1A 200 mΩ Top Switch Current Limit l 1.6 1.8 2 A Bottom Switch On Resistance ISW = 1A 180 mΩ Bottom Switch Current Limit 1.6 2 2.4 A SW Leakage Current VIN = 36V, VSW = 0V, 36V –1.5 1.5 µA Minimum Off Time 20 50 70 ns Minimum ON Time 20 40 65 ns
PWMTG Gate Driver
PWMTG ON Voltage (VISP1-PWMTG1, ISP1,2 = 36V 7.5 9.5 V VISP2-PWMTG2) PWMTG OFF Voltage (VISP1-PWMTG1, ISP1,2 = 36V 0 0.3 V VISP2-PWMTG2) PWMTG Turn-On Time CLOAD = 500pF, ISP1,2 = 36V 70 ns PWMTG Turn-Off Time CLOAD = 500pF, ISP1,2 = 36V 40 ns 3964fb 4 For more information www.linear.com/LT3964