Datasheet LTC3770 (Analog Devices) - 4

HerstellerAnalog Devices
BeschreibungFast No RSENSE Step-Down Synchronous Controller with Margining, Tracking and PLL
Seiten / Seite24 / 4 — ELECTRICAL CHARACTERISTICS. The. denotes specifi cations which apply over …
Dateiformat / GrößePDF / 273 Kb
DokumentenspracheEnglisch

ELECTRICAL CHARACTERISTICS. The. denotes specifi cations which apply over the full operating

ELECTRICAL CHARACTERISTICS The denotes specifi cations which apply over the full operating

Modelllinie für dieses Datenblatt

Textversion des Dokuments

LTC3770
ELECTRICAL CHARACTERISTICS The
l
denotes specifi cations which apply over the full operating temperature range, otherwise specifi cations are TA = 25°C. VIN = 15V unless otherwise noted. SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS Internal VCC Regulator
VINTVCC Internal VCC Voltage 6V < VIN < 30V l 4.7 5 5.3 V ΔVLDO(LOADREG) Internal VCC Load Regulation ICC = 0mA to 20mA –0.1 ±2 %
Phased-Locked Loop
RPLLIN PLLIN Input Resistance 50 kΩ IPLLFLTR Phase Detector Output Current Sink Capability fPLLIN < f0 –15 μA Source Capability fPLLIN > f0 15 μA
PGOOD Output
ΔVFBH PGOOD Upper Threshold VFB Rising 7 10 13 % ΔVFBL PGOOD Lower Threshold VFB Falling –7 –10 –13 % ΔVFB(HYS) PGOOD Hysteresis VFB Returning 1.5 3 % VPGL PGOOD Low Voltage IPGOOD = 5mA 0.15 0.4 V
Note 1:
Stresses beyond those listed under Absolute Maximum Ratings
Note 4:
The LTC3770E is guaranteed to meet performance specifi cations may cause permanent damage to the device. Exposure to any Absolute from 0°C to 85°C. Specifi cations over the –40°C to 85°C operating Maximum Rating condition for extended periods may affect device temperature range are assured by design, characterization and correlation reliability and lifetime. with statistical process controls.
Note 2:
TJ is calculated from the ambient temperature TA and power
Note 5:
The minimum off-time condition is specifi ed for large peak-to-peak dissipation PD as follows: inductor ripple current (see Minimum Off-Time Considerations in LTC3770EG: T the Applications Information section). J = TA + (PD • 130°C/W) LTC3770EUH: TJ = TA + (PD • 34°C/W)
Note 3:
The 3770 is tested in a feedback loop that adjusts VFB to achieve a specifi ed error amplifi er output voltage (ITH). For these tests, VREFOUT = VREFIN.
TYPICAL PERFORMANCE CHARACTERISTICS Current Sense Threshold vs ITH Voltage On-Time vs ION Current On-Time vs VON Voltage
300 10000 1200 V V I RNG = 2V VON = 0V ION = 60μA 1000 200 1.4V 1V 1000 800 100 0.7V 0.5V 600 0 ON-TIME (ns) ON-TIME (ns) 100 400 –100 200 CURRENT SENSE THRESHOLD (mV) –200 10 0 0 0.5 1.0 1.5 2.0 2.5 3.0 1 10 100 0 1 2 3 4 5 ITH VOLTAGE (V) ION CURRENT (μA) VON VOLTAGE (V) 3770 G01 3770 G02 3770 G03 3770fc 4