1 μA Micropower CMOSOperational AmplifiersAD8502/AD8504FEATURESPIN CONFIGURATIONSSupply current: 1 μA maximum/amplifierOUT A 18 V+Offset voltage: 3 mV maximum–IN A 2AD85027 OUT BSingle-supply or dual-supply operationTOP VIEW+IN A 36 –IN BRail-to-rail input and output(Not to Scale) 01 0 No phase reversalV– 45 +IN B 3- 32 06 Unity gain stable Figure 1. 8-Lead SOT-23 APPLICATIONSOUT A 114 OUT D2Portable equipment–IN A13 –IN D+IN AAD8504Remote sensors312 +IN DTOP VIEWLow power filtersV+ 411 V–(Not to Scale)Threshold detectors+IN B 510 +IN C–IN B 69Current sensing–IN C 38 OUT B 78OUT C 0 3- 32 06 Figure 2. 14-Lead TSSOP (RU-14) GENERAL DESCRIPTION The AD8502/AD8504 are low power, precision CMOS operational without creating excessively large output offset errors. The amplifiers featuring a maximum supply current of 1 μA per AD8502 and AD8504 offer an additional benefit by providing amplifier. The AD8502/AD8504 have a maximum offset voltage high accuracy without the need for system calibration. of 3 mV and a typical input bias current of 1 pA operating rail- The AD8502/AD8504 are fully specified over the industrial to-rail on both the input and output. The AD8502/AD8504 can temperature range (−40°C to +85°C) and the extended indus- operate from a single-supply voltage of +1.8 V to +5.5 V or a trial temperature range (−40°C to +125°C). The AD8502 is dual-supply voltage of ±0.9 V to ±2.75 V. available in an 8-lead, SOT-23 surface-mount package. The With its low power consumption, low input bias current, and AD8504 is available in a 14-lead TSSOP surface-mount package. rail-to-rail input and output, the AD8502/AD8504 are ideally suited for a variety of battery-powered portable applications. Table 1. Low Supply Current Op Amps Potential applications include bedside monitors, pulse monitors, Supply Current1 μA10 μA20 μA glucose meters, smoke and fire detectors, vibration monitors, Single