Datasheet Texas Instruments OPA549SG3 — Datenblatt

HerstellerTexas Instruments
SerieOPA549
ArtikelnummerOPA549SG3
Datasheet Texas Instruments OPA549SG3

Hochspannungs-, Hochstrom-Operationsverstärker, exzellenter Ausgangs-Swing 11-Power-Paket -40 bis 85

Datenblätter

High-Voltage, High-Current Operational Amplifier datasheet
PDF, 441 Kb, Revision: E, Datei veröffentlicht: Oct 7, 2005
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Verpackung

Pin11
Package TypeKVC
Industry STD TermTO-OTHER
JEDEC CodeR-PSFM-T
Package QTY25
CarrierTUBE
Device MarkingOPA549S
Width (mm)10.7
Length (mm)20.02
Thickness (mm)4.5
Pitch (mm)1.7
Max Height (mm)4.62
Mechanical DataHerunterladen

Parameter

Additional FeaturesAdj Current Limit,Shutdown
ArchitectureBipolar
CMRR(Min)80 dB
CMRR(Typ)95 dB
GBW(Typ)0.9 MHz
Input Bias Current(Max)500000 pA
Iq per channel(Max)35 mA
Iq per channel(Typ)26 mA
Number of Channels1
Offset Drift(Typ)20 uV/C
Operating Temperature Range-40 to 85 C
Output Current(Typ)8000 mA
Package GroupPower Package
Package Size: mm2:W x L11Power Package: 90 mm2: 4.5 x 20.02(Power Package) PKG
Rail-to-RailIn to V-
RatingCatalog
Slew Rate(Typ)9 V/us
Total Supply Voltage(Max)60 +5V=5, +/-5V=10
Total Supply Voltage(Min)8 +5V=5, +/-5V=10
Vos (Offset Voltage @ 25C)(Max)5 mV

Öko-Plan

RoHSCompliant

Design Kits und Evaluierungsmodule

  • Evaluation Modules & Boards: OPAMPEVM
    Universal Operational Amplifier Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

Anwendungshinweise

  • DC MOTOR SPEED CONTROLLER: Control a DC Motor without Tachometer Feedback
    PDF, 50 Kb, Datei veröffentlicht: Sep 27, 2000
    DC motor speed is often regulated with a closed-loop speed controller using tachometer feedback. It is possible, however, to control dc motor speed without tachometer feedback.
  • MTTF, Failrate, Reliability, and Life Testing
    PDF, 51 Kb, Datei veröffentlicht: Oct 4, 2000
    At Burr-Brown, we characterize and qualify the reliability of our devices through high temperature life testing. The results of this testing are quantified with such values as MTTF and failure rate. This information can be very valuable when used for comparative purposes or applied to reliablility calculations. However, this information loses its worth if it is not precisely understood and appropr
  • Power Amplifier Stress and Power Handling Limitations
    PDF, 55 Kb, Datei veröffentlicht: Sep 27, 2000
    To achieve reliable power amplifier designs you must consider the stress on the amplifier compared to its power handling limitations. Power handling limits are specified by the Safe Operating Area (SOA) curves of the power amp. Stress on the amplifier depends on amplifier load and signal conditions which can be evaluated with straightforward techniques.

Modellreihe

Serie: OPA549 (4)

Herstellerklassifikation

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Power Op Amps