Datasheet AD606JNZ - Analog Devices IC, AMP, LOG 80 dB, PDIP16, 606 — Datenblatt

Analog Devices AD606JNZ

Part Number: AD606JNZ

Detaillierte Beschreibung

Manufacturer: Analog Devices

Description: IC, AMP, LOG 80 dB, PDIP16, 606

data sheetDownload Data Sheet

Docket:
a
50 MHz, 80 dB Demodulating Logarithmic Amplifier with Limiter Output AD606
a loadable output voltage of +0.1 V dc to +4 V dc.

The logarithmic scaling is such that the output is +0.5 V for a sinusoidal input of ­75 dBm and +3.5 V at an input of +5 dBm; over this range the logarithmic linearity is typically within ± 0.4 dB. All scaling parameters are proportional to the supply voltage. The AD606 can operate above and below these limits, with reduced linearity, to provide as much as 90 dB of conversion range. A second low-pass filter automatically nulls the input offset of the first stage down to the submicrovolt level. Adding external capacitors to both filters allows operation at input frequencies as low as a few hertz. The AD606's limiter output provides a hard-limited signal output as a differential current of ± 1.2 mA from open-collector outputs. In a typical application, both of these outputs are loaded by 200 resistors to provide a voltage gain of more than 90 dB from the input

Specifications:

  • Bandwidth: 50 MHz
  • Base Number: 606
  • Mounting Type: Through Hole
  • Number of Amplifiers: 1
  • Number of Pins: 16
  • Operating Temperature Range: 0°C to +70°C
  • Package / Case: DIP
  • Response Time: 5 µs
  • SVHC: No SVHC (18-Jun-2010)
  • Supply Voltage + Nom: 5 V
  • Supply Voltage Range: 4.5 V to 5.5 V

RoHS: Yes

Accessories:

  • Fischer Elektronik - ICK SMD E 15 SA
  • STANNOL - 631954