Datasheet Texas Instruments TPS63802DLAR — Datenblatt
| Hersteller | Texas Instruments |
| Serie | TPS63802 |
| Artikelnummer | TPS63802DLAR |
Hochstrom, hocheffizienter Einzelinduktor-Buck-Boost-Wandler 10-VSON-HR -40 bis 125
Datenblätter
TPS63802 2-A, high-efficient, low IQ buck-boost converter with small solution size datasheet
PDF, 2.1 Mb, Revision: A, Datei veröffentlicht: Jan 30, 2019
Preise
Status
| Lifecycle Status | Preview (Device has been announced but is not in production. Samples may or may not be available) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 10 |
| Package Type | DLA |
| Package QTY | 3000 |
| Carrier | LARGE T&R |
| Device Marking | 63802 |
| Width (mm) | 2 |
| Length (mm) | 3 |
| Thickness (mm) | 0.9 |
| Mechanical Data | Herunterladen |
Parameter
| Approx. price | 0.98 | 1ku US$ |
| Duty cycle(Max) | 100 % |
| Features | Enable,Light Load Efficiency,Load Disconnect,Power Good,Pre-Bias Start-Up,Synchronous Rectification,UVLO Fixed |
| Iout(Max) | 2 A |
| Iq(Typ) | 0.011 mA |
| Operating temperature range | -40 to 125 C |
| Package Group | VSON-HR|10 |
| Rating | Catalog |
| Switch current limit(Min) | 3.9 A |
| Switch current limit(Typ) | 4.5 A |
| Switching frequency(Max) | 2500 kHz |
| Switching frequency(Min) | 2500 kHz |
| Topology | Buck-Boost,Buck/Boost |
| Type | Converter |
| Vin(Max) | 5.5 V |
| Vin(Min) | 1.3 V |
| Vout(Max) | 5 V |
| Vout(Min) | 1.8 V |
Öko-Plan
| RoHS | Compliant |
| Pb Free | Yes |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: TPS63802EVM
TPS63802 high current; high efficiency buck boost converter evaluation module
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Selecting a DC/DC Converter for Maximum Battery Life in Pulsed-Load ApplicationsPDF, 155 Kb, Datei veröffentlicht: Nov 28, 2018
When designing a battery powered system maximizing batterylife is one of the most important design goals. Battery powered systems such as smart meters IoT sensors or ireless medical equipment often require a power converter to obtain fixed supply voltages for time varying loads - Prevent Battery Overdischarge with Precise Threshold Enable PinPDF, 78 Kb, Datei veröffentlicht: Apr 2, 2019
Using a buck-boost converter is a convenient way to obtain a fixed supply voltage within the wide voltage range of typical batteries used in low-power devices such as smart meters wearables or those in the Internet of Things. - Selecting the right DC/DC converter for maximum battery lifePDF, 72 Kb, Datei veröffentlicht: Feb 8, 2019
Choosing the best topology for a battery powered application such as IoT sensor smart lock or IP camera might not always be straightforward based on the available and required voltages alone. - Using Non-Inverting Buck-Boost Converter for Voltage StabilizationPDF, 734 Kb, Datei veröffentlicht: Aug 1, 2019
- Supercapacitor backup power supply with TPS63802PDF, 665 Kb, Datei veröffentlicht: Jan 21, 2019
- Precise Delayed Start-up with Precise Threshold Enable-pinPDF, 188 Kb, Datei veröffentlicht: Apr 15, 2019
- Buck-boost Converter Battery Life Time Estimation for Wireless Network Cameras (Rev. A)PDF, 123 Kb, Revision: A, Datei veröffentlicht: May 28, 2019
- Buck-Boost Converters Solving Power Challenges in Optical ModulesPDF, 45 Kb, Datei veröffentlicht: May 13, 2019
- Improving Load Transient Response for Controlled LoadsPDF, 338 Kb, Datei veröffentlicht: Sep 12, 2019
- Basic Calculations of a 4 Switch Buck-Boost Power Stage (Rev. B)PDF, 400 Kb, Revision: B, Datei veröffentlicht: Jul 9, 2018
This application note gives the equations to calculate the power stage of a non-inverting buck-boost converter built with an IC with integrated switches and operating in continuous conduction mode. See the references at the end of this document if more detail is needed.
Modellreihe
Serie: TPS63802 (3)
- TPS63802DLAR TPS63802DLAT XPS63802DLAT
Herstellerklassifikation
- Semiconductors > Analog and Mixed-Signal > Power management > DC/DC switching regulators > Buck-boost & inverting > Buck-boost, inverting & split-rail converters (integrated switch)