Datasheet Toshiba TC78H651FNG — Datenblatt

TC78H651FNG
TOSHIBA CDMOS Integrated Circuit Silicon Monolithic TC78H651FNG
1.8-V Dual bridge driver IC
The TC78H651FNG is a dual bridge driver IC for DC motors/Stepping
motors which incorporate DMOS with low ON resistance in output
transistors. Forward, reverse, or stop mode can be selected. Over
current detection, thermal shutdown, and under voltage lockout
functions are implemented. Features
• Power supply voltage (Absolute maximum ratings): 7.0 V (max) • Power supply voltage (Operating Range): 1.8 V to 6.0 V • Output current (Absolute maximum ratings): 1.6 A (max) • Output ON resistance: 0.22 Ω (typ.)
(Ta = 25 °C, Sum of upper and lower side, VM = 5.0 V) P-TSSOP16-0505-0.65-001 Weight: 0.06 g (typ.) • Built-in standby function: Consumption current 0 μA (typ.) • Built-in cross conduction protection circuit • Built-in over current detection (ISD), thermal shutdown (TSD), and under voltage lockout (UVLO) • Forward / Reverse / Stop modes are selectable • Package: P-TSSOP16-0505-0.65-001 © 2018
Toshiba Electronic Devices & Storage Corporation 1 2018-04-18 TC78H651FNG
Pin assignment (Top view) VM 1 16 NC NC 2 15 OUT4 IN4 3 14 OUT3 IN3 4 13 NC NC 5 12 OUT1 IN1 6 11 OUT2 IN2 7 10 NC NC 8 9 GND 2 2018-04-18 TC78H651FNG
Block Diagram VM
Regulator OUT1
OUT2 37 kΩ IN1 150 kΩ
37 kΩ IN2 150 kΩ Control
Circuit 37 kΩ IN3 150 kΩ OUT3
OUT4 37 kΩ IN4 150 kΩ UVLO GND TSD
ISD Note: Please note that in the block diagram, functional blocks or constants may be omitted or simplified for explanatory
purposes. Pin Functions
Functional description Remarks Pin name Pin No. VM 1 Power supply pin for motor NC 2 No connection Operation range is from 1.8 V to 6.0 V.
Use this pin as open. IN4 3 Control input pin 4 Refer to the section of “Input/Output Functions”. IN3 4 Control input pin 3 Refer to the section of “Input/Output Functions”. NC 5 No connection Use this pin as open. IN1 6 Control input pin 1 Refer to the section of “Input/Output Functions”. IN2 7 Control input pin 2 Refer to the section of “Input/Output Functions”. NC 8 No connection Use this pin as open. GND 9 GND pin — NC 10 No connection Use this pin as open. OUT2 11 Output pin 2 Motor coil connection pin OUT1 12 Output pin 1 Motor coil connection pin NC 13 No connection Use this pin as open. OUT3 14 Output pin 3 Motor coil connection pin OUT4 15 Output pin 4 Motor coil connection pin NC 16 No connection Use this pin as open. 3 2018-04-18 TC78H651FNG
Input/Output Functions …