Datasheet Texas Instruments MSP430FR2353TDBT — Datenblatt

HerstellerTexas Instruments
SerieMSP430FR2353
ArtikelnummerMSP430FR2353TDBT
Datasheet Texas Instruments MSP430FR2353TDBT

24-MHz-105C-ULP-Mikrocontroller mit 16-KB-FRAM, 2-KB-SRAM, 44 E / A, 12-Bit-ADC, 12-Bit-DACs, OpAmp / PGA 38-TSSOP -40 bis 105

Datenblätter

MSP430FR235x, MSP430FR215x Mixed-Signal Microcontrollers datasheet
PDF, 1.6 Mb, Datei veröffentlicht: May 10, 2018
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusPreview (Device has been announced but is not in production. Samples may or may not be available)
Manufacture's Sample AvailabilityNo

Verpackung

Pin38
Package TypeDBT
Industry STD TermTSSOP
JEDEC CodeR-PDSO-G
Package QTY50
CarrierTUBE
Device Marking430FR2353
Width (mm)4.4
Length (mm)9.7
Thickness (mm)1
Pitch (mm)0.5
Max Height (mm)1.2
Mechanical DataHerunterladen

Parameter

ADC12-bit SAR
ADC: Channels12
BootloaderUART BSL
Comparator Channels2
FeaturedFR2
FeaturesDAC,OpAmp,Real-Time Clock
GPIO Pins44
I2C2
Non-volatile Memory16 KB
Operating Temperature Range-40 to 105 C
Package GroupTSSOP
Package Size: mm2:W x L38TSSOP: 62 mm2: 6.4 x 9.7(TSSOP) PKG
RAM2 KB
SPI4
Special I/ON/A
Timers - 16-bit4
UART2
USBNo

Öko-Plan

RoHSCompliant

Design Kits und Evaluierungsmodule

  • Evaluation Modules & Boards: MSP-TS430PT48
    Target Development Board for MSP430FR2355 MCU - 48-pin (microcontroller not included)
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: MSP-EXP430FR2355
    MSP430FR2355 LaunchPad Development Kit
    Lifecycle Status: Active (Recommended for new designs)

Anwendungshinweise

  • How to Use the Smart Analog Combo in MSP430 MCUs
    PDF, 486 Kb, Datei veröffentlicht: May 4, 2018
    Operational amplifiers (Op Amps or OAs) are used extensively in sensing and measurement applications. MSP430 microcontrollers (MCUs) provide full signal chain implementation with the integrated Smart Analog Combo (SAC) to replace external Op Amps. The Smart Analog Combo is a configurable analog peripheral that includes a high-performance low-power Op Amp a programmable gain amplifier (PGA) with g
  • Migration From MSP430 FR58xx FR59xx and FR6xx to FR4xx and FR2xx
    PDF, 214 Kb, Datei veröffentlicht: May 4, 2018
    This application report enables easy migration from the MSP430FR58xx MSP430FR59xx and MSP430FR6xx family to the MSP430FR4xx and MSP430FR2xx family. This report describes programming system and peripheral considerations when migrating firmware. The intent is to highlight key differences between the two families. For more information on the use of the MSP430FR4xx and MSP430FR2xx devices see the
  • Migrating From MSP430 F2xx and G2xx Families to MSP430 FR4xx and FR2xx Family (Rev. E)
    PDF, 237 Kb, Revision: E, Datei veröffentlicht: May 4, 2018
    This application report helps to ease the migration from MSP430F2xx flash-based MCUs to the MSP430FR4xx and MSP430FR2xx family of FRAM-based MCUs. It discusses programming system hardware core architecture and peripheral considerations. The intent is to highlight key differences between the two families. For more information on the use of the MSP430FR4xx and MSP430FR2xx devices see the MSP430

Modellreihe

Herstellerklassifikation

  • Semiconductors > Microcontrollers (MCU) > MSP430 Ultra-Low-Power MCUs > Value Line MCUs