Datasheet Analog Devices HMC361S8GTR — Datenblatt

HMC361S8G/361S8GE
v08.1119 FREQUENCY DIVIDERS & DETECTORS -SMT 4 SMT GaAs HBT MMIC
DIVIDE-BY-2, DC -10 GHz Typical Applications Features Prescaler for DC to X Band PLL Applications: Ultra Low SSB Phase Noise: -148 dBc/Hz • Satellite Communication Systems Wide Bandwidth • Fiber Optic Output Power: 3 dBm • Point-to-Point and Point-to-Multi-Point Radios Single DC Supply: +5V • VSAT S8G SMT Package Functional Diagram General Description
The HMC361S8G & HMC361S8GE are low noise
Divide-by-2 Static Dividers with InGaP GaAs HBT
technology in 8 lead surface mount plastic packages.
This device operates from DC (with a square wave
input) to 10 GHz input frequency with a single +5V
DC supply. The low additive SSB phase noise of -148
dBc/Hz at 100 kHz offset helps the user maintain good
system noise performance. Electrical Specifications, TA = +25° C, 50 Ohm System, Vcc= 5V
Parameter Conditions Maximum Input Frequency
Minimum Input Frequency
Input Power Range Output Power Reverse Leakage
SSB Phase Noise (100 kHz offset)
Output Transition Time Sine Wave Input. Min. Typ. 10 11 [1] 0.2 Max. Units
GHz 0.5 GHz Fin = 1 to 8 GHz -15 +10 dBm Fin = 8 to 10 GHz -10 +2 dBm  Fin = 6 GHz 0 Fin = 10 GHz -6 3 dBm
dBm Both RF Outputs Terminated 45 dB Pin = 0 dBm, Fin = 6 GHz -148 dBc/Hz Pin = 0 dBm, Fout = 882 MHz 100 ps 83 mA Supply Current (Icc)
1. Divider will operate down to DC for square-wave input signal. 4-1 Information
furnished
by Analog
is believed
to be …

HMC361S8G / 361S8GE
v07.1114 FREQUENCY DIVIDERS & DETECTORS -SMT 4 SMT GaAs HBT MMIC
DIVIDE-BY-2, DC -10 GHz Typical Applications Features Prescaler for DC to X band PLL applications: Ultra low SSB phase noise: -148 dBc/Hz Satellite communication systems Wide bandwidth Fiber optic Output power: 3 dBm Point-to-point and point-to-multi-point radios Single DC supply: +5V VSAT S8G SMT package Functional Diagram General Description
The HMC361S8G & HMC361S8GE are low noise
divide-by-2 static dividers with InGaP GaAs HBT
technology in 8 lead surface mount plastic packages. This device operates from DC (with a square
wave input) to 10 GHz input frequency with a single
+5V DC supply. The low additive SSB phase noise of
-148 dBc/Hz at 100 kHz offset helps the user maintain
good system noise performance. Electrical Specifications, TA = +25В° C, 50 Ohm System, Vcc = 5V
Parameter
Input frequency
Input power range Output power Reverse leakage
SSB phase noise (100 kHz offset)
Output transition time
Supply current (Icc) Conditions Min. Max. Units Sine wave input. [1] [2] 0.4 10 GHz Fin = 0.4 GHz to 1 GHz -5 +10 dBm Fin = 1 GHz to 8 GHz -15 +10 dBm Fin = 8 GHz to 10 GHz -10 +2 dBm  Fin = 6 GHz 0 Fin = 10 GHz -6 Typ. 3 dBm
dBm Both RF outputs terminated 45 dB Pin = 0 dBm, Fin = 6 GHz -148 dBc/Hz Pin = 0 dBm, Fout = 882 MHz 100 ps 83 mA [1] Divider will operate down to near DC for square-wave input signal.
[2] For stable operation without an input signal, refer to Analog Devices Application Note, “Frequency Divider Operation & Compensation with
No Input Signal.” 4-1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no
ForOne
price,Technology
delivery, and Way,
to place …