Datasheet Texas Instruments CC1352R1F3RGZR — Datenblatt
| Hersteller | Texas Instruments |
| Serie | CC1352R |
| Artikelnummer | CC1352R1F3RGZR |
SimpleLink Multiband CC1352R Wireless MCU 48-VQFN -40 bis 85
Datenblätter
CC1352R SimpleLink High-Performance Dual-Band Wireless MCU datasheet
PDF, 1.1 Mb, Datei veröffentlicht: Jan 16, 2018
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | Preview (Device has been announced but is not in production. Samples may or may not be available) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 48 |
| Package Type | RGZ |
| Industry STD Term | VQFN |
| JEDEC Code | S-PQFP-N |
| Package QTY | 2500 |
| Carrier | LARGE T&R |
| Width (mm) | 7 |
| Length (mm) | 7 |
| Thickness (mm) | 0.9 |
| Pitch (mm) | 0.5 |
| Max Height (mm) | 1 |
| Mechanical Data | Herunterladen |
Parameter
| Bluetooth Standard | SPI,UART,I2S,I2C |
| Data Rate(Max) | 5000 kbps |
| Device Type | SimpleLink Wireless MCU |
| Package Group | VQFN |
| Package Size: mm2:W x L | 48VQFN: 49 mm2: 7 x 7(VQFN) PKG |
| Rating | Catalog |
| Security Enabler | Cryptographic acceleration,Debug security,Device identity,Software IP protection |
| Technology | Sub-1 GHz,Bluetooth low energy,Zigbee,Thread |
| Throughput(Max) | 5 Mbps |
Öko-Plan
| RoHS | See ti.com |
Design Kits und Evaluierungsmodule
- Debug Probes/Analyzers: TMDSEMU200-U
XDS200 USB Debug Probe
Lifecycle Status: Active (Recommended for new designs) - Development Kits: LAUNCHXL-CC1352R1
SimpleLink Multi-Band CC1352R Wireless MCU LaunchPad Development Kit
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Low-Power ADC Solution for CC13x2 and CC26x2PDF, 190 Kb, Datei veröffentlicht: Mar 2, 2018
The 12-bit analog-to-digital converter (ADC) peripheral block included in CC13x2 and CC26x2 deviceswhich is typically used by the Sensor Controller requires the SCLK_HF signal and is therefore notavailable in low-power (2 MHz) mode. The goal of this application note is to help users create an 8-bitsuccessive-approximation (SAR)-type low-power ADC using the CC13x2 and CC26x2 Sensor Con - Use of Low-power ZigbeeВ® and Thread With the SimpleLinkв„ў Wireless MCU FamilyPDF, 81 Kb, Datei veröffentlicht: Feb 27, 2018
- Single-Chip Flow Metering Solution With the CC13x2R Wireless MCUsPDF, 88 Kb, Datei veröffentlicht: Feb 27, 2018
- Sensor Sequencing Using the CC13x2 and CC26x2 Sensor ControllerPDF, 252 Kb, Datei veröffentlicht: Mar 5, 2017
The purpose of this application note is to demonstrate how current consumption can be minimized bymaking the Sensor Controller automatically enable a sensor at a designated time period before the sensoris to be sampled. This implementation allows the Sensor Controller to stay in the lowest-possible powermode while the sensor boots and then start up when the sensor is ready. In this appl - Ultra-Low Power Designs With the CC13x2 and CC26x2 Sensor ControllerPDF, 87 Kb, Datei veröffentlicht: Feb 27, 2018
- Getting Started With the CC13xx and CC26xx Sensor ControllerPDF, 1.1 Mb, Datei veröffentlicht: Oct 6, 2017
This application note is intended as an introduction to the low-power Sensor Controller Engine found in theCC13xx and CC26xx devices. It explains the benefits of using the Sensor Controller in various use cases.The application note also describes how to get started using the Sensor Controller and directs you to therequired tools and collaterals.
Modellreihe
Serie: CC1352R (3)
- CC1352R1F3RGZR CC1352R1F3RGZT XCC1352R1F3RGZR
Herstellerklassifikation
- Semiconductors > Wireless Connectivity > SimpleLink Solutions > Multi-Standard