Datasheet Texas Instruments TRF7960RHBT — Datenblatt
Hersteller | Texas Instruments |
Serie | TRF7960 |
Artikelnummer | TRF7960RHBT |
TRF7960 Vollintegrierter 13,56-MHz-RFID-Lese- / Schreib-IC 32-VQFN -40 bis 110 mit mehreren Protokollen
Datenblätter
TRF7960, TRF7961 Multiple-Standard Fully Integrated 13.56-MHz RFID Analog Front End and Data-Framing Reader System datasheet
PDF, 1.5 Mb, Revision: G, Datei veröffentlicht: May 18, 2017
Auszug aus dem Dokument
Preise
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes |
Verpackung
Pin | 32 | 32 |
Package Type | RHB | RHB |
Industry STD Term | VQFN | VQFN |
JEDEC Code | S-PQFP-N | S-PQFP-N |
Package QTY | 250 | 250 |
Carrier | SMALL T&R | SMALL T&R |
Device Marking | TRF | 7960 |
Width (mm) | 5 | 5 |
Length (mm) | 5 | 5 |
Thickness (mm) | .9 | .9 |
Pitch (mm) | .5 | .5 |
Max Height (mm) | 1 | 1 |
Mechanical Data | Herunterladen | Herunterladen |
Parameter
Device Type | Reader |
Dimensions | 5 x 5 mm |
Frequency | 13.56 MHz |
Operating Temperature Range | -40 to 110 C |
Package | QFN32 mm |
Rating | Catalog |
Standard | ISO 14443A,ISO 14443B,ISO 15693,ISO 18000-3 |
Technology | N/A |
Throughput(Max) | N/A Mbps |
Transmission Principle | FDX - ASK, OOK, FSK, PSK |
Öko-Plan
RoHS | Compliant |
Design Kits und Evaluierungsmodule
- Evaluation Modules & Boards: TRF7960ATB
TRF7960A Target Board
Lifecycle Status: Active (Recommended for new designs)
Anwendungshinweise
- Comparison of TRF7960 and TRF7960APDF, 54 Kb, Datei veröffentlicht: May 27, 2011
This application report helps current and new users of the TRF7960 high-frequency RFID/NFC reader understand the differences between the TRF7960 and the TRF7960A devices. Understanding these differences in detail and applying this knowledge to application-specific requirements helps designers make informed decisions about whether or not a bill of materials change is needed. - Management of the TRF7960 and TRF7960A Startup SequencePDF, 138 Kb, Datei veröffentlicht: Jun 5, 2012
System developers concerned about minimizing the current draw of TRF7960, -60A (and their variants) systems at startup time need guidance about handling the Regulator Control register (0x0B) value. Guidance is necessary due to the conditions under which the TRF796x/-6xA starts up with the automatic (default) setting of this register, after the EN line (pin 28) is asserted from the controlling MCU - TRF7960 and TRF7970A ComparisonPDF, 59 Kb, Datei veröffentlicht: Aug 3, 2011
This application report is intended to help users of the TRF7970A high-frequency RFID/NFC reader IC understand the differences between it and the TRF7960 IC. Understanding these differences in detail and applying this knowledge to application-specific requirements can assist in development efforts. - Implementation of ISO14443B Protocol in the TI TRF796xPDF, 143 Kb, Datei veröffentlicht: Apr 28, 2009
- Firmware Description of the TI TRF796x Evaluation Module (EVM)PDF, 340 Kb, Datei veröffentlicht: Mar 9, 2009
- TRF796x Software Design HintsPDF, 97 Kb, Datei veröffentlicht: Dec 13, 2010
- Implementation of ISO14443A Anti-Collision Sequence in the TI TRF796xPDF, 165 Kb, Datei veröffentlicht: Apr 24, 2009
- Implementation of ISO15693 Protocol in the TI TRF796xPDF, 198 Kb, Datei veröffentlicht: Apr 28, 2009
- TRF79xxA HF-RFID Reader Layout Design Guide (Rev. A)PDF, 799 Kb, Revision: A, Datei veröffentlicht: Apr 18, 2016
This application note describes suggested guidelines for use in the laying out the TRF79xxA family of HF RFID readers. As each customer’s implementation will be different, it is the customer's responsibility to ensure that all the proper methodologies and techniques are followed to ensure optimal performance. - Using the SPI Interface with TRF7960 (Rev. A)PDF, 394 Kb, Revision: A, Datei veröffentlicht: May 30, 2017
One of the microcontroller interfacing options available for the TRF7960 is the SPI with SS*. This is also known as 4-wire hardware SPI mode. The TRF7960 device acts as the slave device and the microcontroller or DSP is the master in this configuration. - Antenna Matching for the TRF7960 RFID Reader (Rev. A)PDF, 1.2 Mb, Revision: A, Datei veröffentlicht: Sep 24, 2013
- NFC/RFID Reader Ultra-Low-Power Card Presence Detect With MSP430 and TRF79xxAPDF, 2.8 Mb, Datei veröffentlicht: Mar 18, 2013
NFC and RFID reader battery-powered applications must have a defined and limited energy consumption budget as well as low cost for a product to be realized. Techniques and strategies have emerged over the years for the card presence detection that attempt to address both concerns.The intent of this application report is to contribute to these techniques and strategies by offering an advancement
Modellreihe
Serie: TRF7960 (4)
- TRF7960RHBR TRF7960RHBRG4 TRF7960RHBT TRF7960RHBTG4
Herstellerklassifikation
- Semiconductors > Wireless Connectivity > NFC / RFID