Datasheet Texas Instruments TLC2201IP — Datenblatt

HerstellerTexas Instruments
SerieTLC2201
ArtikelnummerTLC2201IP
Datasheet Texas Instruments TLC2201IP

Rauscharmer Präzisions-Operationsverstärker mit Rail-to-Rail-Ausgang 8-PDIP

Datenblätter

Advanced LinCMOS (TM) Low-Noise Precision Operational Amplifiers datasheet
PDF, 1.8 Mb, Revision: B, Datei veröffentlicht: Jan 11, 2008
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Verpackung

Pin8
Package TypeP
Industry STD TermPDIP
JEDEC CodeR-PDIP-T
Package QTY50
CarrierTUBE
Device MarkingTLC2201IP
Width (mm)6.35
Length (mm)9.81
Thickness (mm)3.9
Pitch (mm)2.54
Max Height (mm)5.08
Mechanical DataHerunterladen

Parameter

Additional FeaturesN/A
ArchitectureCMOS
CMRR(Min)90 dB
CMRR(Typ)110 dB
GBW(Typ)1.8 MHz
Input Bias Current(Max)60 pA
Iq per channel(Max)1.5 mA
Iq per channel(Typ)1 mA
Number of Channels1
Offset Drift(Typ)0.5 uV/C
Operating Temperature Range0 to 70 C
Output Current(Typ)4.5 mA
Package GroupPDIP
Package Size: mm2:W x LSee datasheet (PDIP) PKG
Rail-to-RailIn to V-,Out
RatingCatalog
Slew Rate(Typ)2.5 V/us
Total Supply Voltage(Max)16 +5V=5, +/-5V=10
Total Supply Voltage(Min)4.6 +5V=5, +/-5V=10
Vn at 1kHz(Typ)8 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)0.5 mV

Öko-Plan

RoHSCompliant
Pb FreeYes

Anwendungshinweise

  • TLC2201 and TLC2202 EMI Immunity Performance
    PDF, 88 Kb, Datei veröffentlicht: Aug 19, 2013
  • Conditioning a Switch-mode Power Supply Current Signal Using TI Op Amps
    PDF, 61 Kb, Datei veröffentlicht: Mar 23, 2000
    The switch-mode power supply primary current is often sensed using a power resistor. Using an op amp to amplify the current-sense signal can reduce cost and improve noise performance and efficiency. This report reviews the advantages of using an op amp circuit and analyzes the design criteria needed to choose the proper op amp.
  • Use of Rail-to-Rail Operational Amplifiers (Rev. A)
    PDF, 159 Kb, Revision: A, Datei veröffentlicht: Dec 22, 1999
    This application report assists design engineers to understand the functionality and benefits of rail-to-rail operational amplifiers. It shows simplified schematics, functions, and characteristics of the input and output stages. Typical application schematics for rail-to-rail operational amplifiers are also discussed.

Modellreihe

Herstellerklassifikation

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps