Datasheet Microchip SY69753ALHG — Datenblatt

SY69753AL
3.3V, 125Mbps, 155Mbps Clock
and Data Recovery General Description Features The SY69753AL is a complete Clock Recovery and
Data Retiming integrated circuit for OC-3/STS-3
applications at 155Mbps NRZ. The device is ideally
suited for SONET/SDH/ATM applications and other
high-speed data transmission systems.
Clock recovery and data retiming is performed by
synchronizing the on-chip VCO directly to the incoming
data stream. The VCO center frequency is controlled by
the reference clock frequency and the selected divide
ratio. On-chip clock generation is performed through the
use of a frequency multiplier PLL with a byte rate source
as reference.
The SY69753AL also includes a link fault detection
circuit.
Datasheets and support documentation can be found on
Micrel’s web site at: www.micrel.com. 3.3V power supply SONET/SDH/ATM compatible Clock and data recovery for 125Mbps/155Mbps NRZ
data stream Two on-chip PLLs: one for clock generation and
another for clock recovery Selectable reference frequencies Differential PECL high-speed serial I/O Line receiver input: no external buffering needed Link fault indication 100k ECL compatible I/O Industrial temperature range (–40°C to +85°C) Lower power: fully compatible with Micrel’s
SY87701V, but with 30% less power Available in 32-pin EPAD-TQFP Applications Ethernet media converter(m) SONET/SDH/ATM OC-3 Proprietary architecture at 120Mbps to 180Mbps Micrel Inc. 2180 Fortune Drive San Jose, CA 95131 USA tel +1 (408) 944-0800 fax + 1 (408) 474-1000 http://www.micrel.com August 2007 M9999-082107-E
hbwhelp@micrel.com or (408) 955-1690 Micrel, Inc. SY69753AL Ordering Information(1)
Package …