TC1412/TC1412N
2A High-Speed MOSFET Drivers
Features General Description Latch-Up Protected: Withstands 500 mA Reverse
Current Input Withstands Negative Inputs Up to 5V Electrostatic Discharge (ESD) Protected: 2.0 kV
(HBM) and 400V (MM) High Peak Output Current: 2A Wide Input Supply Voltage Operating Range:
-4.5V to 16V High Capacitive Load Drive Capability:
-1000 pF in 18 ns Short Delay Time: 35 ns typical Matched Delay Times Low Supply Current:
-With Logic �1’ Input: 500 µA
-With Logic �0’ Input: 100 µA Low Output Impedance: 4 Available in Space-Saving 8-pin MSOP Package Pinout – same as TC1410/TC1411/TC1413 The TC1412/TC1412N are 2A CMOS buffers/drivers.
They do not latch up under any conditions within their
power and voltage ratings. They are not subject to
damage when up to 5V of noise spiking of either
polarity occurs on the ground pin. They can accept,
without damage or logic upset, up to 500 mA of current
of either polarity being forced back into their output. All
terminals are fully protected against electrostatic
discharge (ESD) up to 2.0 kV (HBM) and 400V (MM). Applications Switch Mode Power Supplies
Pulse Transformer Drive
Line Drivers
Relay Driver As MOSFET drivers, the TC1412/TC1412N can easily
charge a 1000 pF gate capacitance in 18 ns with
matched rise and fall times. To ensure that the
MOSFET’s intended state will not be affected even by …