DATASHEET
ISL6298 FN9173
Rev 4.00
March 9, 2006 Li-ion/Li-Polymer Battery Charger
The ISL6298 is an integrated single-cell Li-ion or Li-polymer
battery charger optimized for low current applications. The
targeted applications include mini-disk (MD) players, Blue
Tooth headsets, or other applications that use low-capacity
battery cells. Features The ISL6298 is a linear charger that charges the battery in a
CC/CV (constant current/constant voltage) profile. The
charge current is programmable with an external resistor up
to 450mA during the CC phase. Once the battery voltage
reaches 4.2V (or 4.1V), the charger enters CV mode and the
charge current starts to reduce. When the charger current
drops to a user-programmable threshold, the charger
indicates the end-of-charge with a STATUS pin. The charger
does not actually terminate until a user-programmable total
fast charge time is reached. If the battery voltage drops to a
recharge threshold after termination, the charger will recharge the battery to its full capacity. The charger
preconditions the battery with 20% of the programmed CC
current if the battery voltage is below 2.8V. The total
precharge time is limited to 1/8 of the total fast charge time. 1% Voltage Accuracy The ISL6298 features charge current thermal foldback to
guarantee safe operation when the printed circuit board is …