Datasheet Linear Technology LTC1327 — Datenblatt

Hersteller	Linear Technology
Serie	LTC1327

3,3 V Mikropower EIA / TIA-562 Transceiver

Datenblätter

PDF, 204 Kb, Datei hochgeladen: Nov 12, 2017

Auszug aus dem Dokument

Verpackung

	LTC1327CG#PBF	LTC1327CG#TRPBF	LTC1327CNW#PBF	LTC1327CSW#PBF	LTC1327CSW#TRPBF
N	1	2	3	4	5
Package	SSOP-28 Paketumrisszeichnung	SSOP-28 Paketumrisszeichnung	NW-28 Paketumrisszeichnung	SW-28 Paketumrisszeichnung	SW-28 Paketumrisszeichnung
Package Code	G	G	NW	SW	SW
Package Index	05-08-1640 (G28)	05-08-1640 (G28)	05-08-1520	05-08-1620 (SW28)	05-08-1620 (SW28)
Pin Count	28	28	28	28	28

Parameter

Parameters / Models	LTC1327CG#PBF	LTC1327CG#TRPBF	LTC1327CNW#PBF	LTC1327CSW#PBF	LTC1327CSW#TRPBF
Driver Disable	no	no	no	no	no
Drivers	3	3	3	3	3
ESD, kV	10	10	10	10	10
Export Control	no	no	no	no	no
IEC61000-4-2 Support	yes	yes	yes	yes	yes
Max Data Rate, Mbps	0.12	0.12	0.12	0.12	0.12
Operating Temperature Range, °C	0 to 70	0 to 70	0 to 70	0 to 70	0 to 70
Power, mW	1.5	1.5	1.5	1.5	1.5
Protocols Supported	RS562	RS562	RS562	RS562	RS562
Receivers	5	5	5	5	5
Shutdown	yes	yes	yes	yes	yes
Supply Voltage Range	3.3V	3.3V	3.3V	3.3V	3.3V
Voltage Gen Components	4 x 0.1ВµF	4 x 0.1ВµF	4 x 0.1ВµF	4 x 0.1ВµF	4 x 0.1ВµF

Öko-Plan

	LTC1327CG#PBF	LTC1327CG#TRPBF	LTC1327CNW#PBF	LTC1327CSW#PBF	LTC1327CSW#TRPBF
RoHS	Compliant	Compliant	Compliant	Compliant	Compliant

Konstruktionshinweise

Herunterladen
RS232 Interface Circuits for 3.3V Systems &mdash DN75
PDF, 105 Kb, Datei veröffentlicht: Oct 1, 1993
Auszug aus dem Dokument
RS232 Interface Circuits for 3.3V Systems вЂ“ Design Note 75 Gary Maulding
The rapid, widespread use of 3.3V logic circuits complicates the selection of RS232 interface circuits. The
optimum choice of an interface circuit should be based
upon several application dependent factors:
1) Logic circuitry connected to interface chip port mouse. The LTВ®1342, LT1330, and LT1331 are all
good RS232 transceiver choices for systems with both
5V and 3V power. Typical performance waveforms for
the LT1342 operating with VCC = 5V and VL = 3.3V are
shown in Figure 2. 2) Power supply voltages available
RECEIVER
OUTPUT 3) Power consumption constraints
4) Serial interface environment
5) Mouse driving requirements
As Figure 1 illustrates, 5V interface circuits cannot be
used to directly connect to 3.3V CMOS logic circuits.
The receiver output level will forward bias the logic
circuitвЂ™s input protection diode, causing large current
п¬‚ow. In the worst case the CMOS logic circuit may
latch up. Resistor voltage dividers or level shift buffers may be used to prevent forward biasing the CMOS
input diode, but an RS232 transceiver designed for 3V
logic application prevents this problem without extra
components or power dissipation.
Many of todayвЂ™s systems have both 5V and 3V power …

Modellreihe

Serie: LTC1327 (5)

LTC1327CG#PBF LTC1327CG#TRPBF LTC1327CNW#PBF LTC1327CSW#PBF LTC1327CSW#TRPBF

Herstellerklassifikation

Interface > RS232/RS562 Transceivers

Kontakte