Datasheet Analog Devices HMC713MS8 — Datenblatt

HMC713MS8 / 713MS8E
v06.0412 Power Detectors -SMT 54 dB, LOGARITHMIC
DETECTOR / CONTROLLER, 45 -2700 MHz
Typical Applications Features The HMC713MS8(E) is ideal for: Wide Dynamic Range: up to 54 dB • Cellular Infrastructure High Accuracy: ±1 dB with 54 dB Range Up To 2.7 GHz • WiMAX, WiBro & LTE/4G Fast Output Response Time • Power Monitoring & Control Circuitry Supply Voltage: +2.7 to +5.5V • Receiver Signal Strength Indication (RSSI) Power-Down Mode • Automatic Gain & Power Control Excellent Stability over Temperature • Military, ECM & Radar MSOP-8 SMT Package: 14.8 mm² Functional Diagram General Description
The HMC713MS8(E) Logarithmic Detector/Controller is ideal for converting RF signals with frequencies
in the 45 MHz to 2700 MHz range, to a proportional
DC voltage at its output. The HMC713MS8(E) employs
a successive compression technology which delivers
54 dB of dynamic range with high conversion accuracy
over a wide input frequency range. As the input signal is
increased, successive amplifiers move into saturation
one by one creating an accurate approximation of
the logarithm function. The outputs of a series of
detectors are summed, converted into voltage domain
and buffered to drive the OUT output. For detection
mode, the OUT pin is connected to the VSET input and
will provide a nominal logarithmic slope of 17 mV/dB
and an intercept of -68 dBm. The HMC713MS8(E) can
also be used in the controller mode where an external
voltage is applied to the VSET pin to create an AGC or
APC feedback loop. Electrical Specifications, TA = +25 °C, Vcc= +3V [1]
Parameter Typ. Typ. Typ. Typ. Typ. Typ. Units
MHz Input Frequency 45 100 900 1900 2200 2700 ±3 dB Dynamic Range 60 61 61 62 62 68 dB ±3 dB Dynamic Range Center -26 -28 -28 -30 -31 -27 dBm 53 54 54 54 53 59 dB OUT Slope ±1 dB Dynamic Range 17.3 17.3 17.2 17.1 17.1 17.2 mV/dB OUT Intercept -68 -68 -69 -71 -72 -70 dBm Variation of OUT with Temperature …

HMC713MS8 / 713MS8E
v06.0412 Power Detectors -SMT 54 dB, LOGARITHMIC
DETECTOR / CONTROLLER, 45 -2700 MHz
Typical Applications Features The HMC713MS8(E) is ideal for: Wide Dynamic Range: up to 54 dB • Cellular Infrastructure High Accuracy: ±1 dB with 54 dB Range Up To 2.7 GHz • WiMAX, WiBro & LTE/4G Fast Output Response Time • Power Monitoring & Control Circuitry Supply Voltage: +2.7 to +5.5V • Receiver Signal Strength Indication (RSSI) Power-Down Mode • Automatic Gain & Power Control Excellent Stability over Temperature • Military, ECM & Radar MSOP-8 SMT Package: 14.8 mm² Functional Diagram General Description
The HMC713MS8(E) Logarithmic Detector/Controller is ideal for converting RF signals with frequencies
in the 45 MHz to 2700 MHz range, to a proportional
DC voltage at its output. The HMC713MS8(E) employs
a successive compression technology which delivers
54 dB of dynamic range with high conversion accuracy
over a wide input frequency range. As the input signal is
increased, successive amplifiers move into saturation
one by one creating an accurate approximation of
the logarithm function. The outputs of a series of
detectors are summed, converted into voltage domain
and buffered to drive the OUT output. For detection
mode, the OUT pin is connected to the VSET input and
will provide a nominal logarithmic slope of 17 mV/dB
and an intercept of -68 dBm. The HMC713MS8(E) can
also be used in the controller mode where an external
voltage is applied to the VSET pin to create an AGC or
APC feedback loop. Electrical Specifications, TA = +25 °C, Vcc= +3V [1]
Parameter Typ. Typ. Typ. Typ. Typ. Typ. Units
MHz Input Frequency 45 100 900 1900 2200 2700 ±3 dB Dynamic Range 60 61 61 62 62 68 dB ±3 dB Dynamic Range Center -26 -28 -28 -30 -31 -27 dBm 53 54 54 54 53 59 dB OUT Slope ±1 dB Dynamic Range 17.3 17.3 17.2 17.1 17.1 17.2 mV/dB OUT Intercept -68 -68 -69 -71 -72 -70 dBm Variation of OUT with Temperature …