Datasheet Linear Technology LTC3526LEDC#TRMPBF — Datenblatt

Datenblätter

Andere Optionen

LTC3526LB

Konstruktionshinweise

• Herunterladen
  Tiny Synchronous Step-Up Converter Starts Up at 700mV &mdash DN428
  PDF, 79 Kb, Datei veröffentlicht: Oct 30, 2007
  Auszug aus dem Dokument

  advertisement Tiny Synchronous Step-Up Converter Starts Up at 700mV
  Design Note 428 Lower Start-Up Devices for Energy Harvesting
  Work Below 100mV—See the LTC3108 Dave Salerno
  Introduction
  Alkaline batteries are convenient because they’re easy to
  п¬Ѓnd and relatively inexpensive, making them the power
  source of choice for portable instruments and devices
  used for outdoor recreation. Their long shelf life also
  makes them an excellent choice for emergency equipment
  that may see infrequent use but must be ready to go on a
  moment’s notice. It is important that the DC/DC converters in portable devices operate over the widest possible
  battery voltage range to extend battery run time, and thus
  save the user from frequent battery replacement.
  Single-cell alkaline batteries, with a 1.6V to 0.9V range,
  present a special challenge to DC/DC converters because
  of their low voltage and the fact that their internal resistance increases as the battery discharges. Thus, a DC/DC
  converter that can both start up and operate efficiently at
  low input voltages is ideally suited for single-cell alkaline
  products.
  The LTC В®3526L is a 1MHz, 550mA synchronous stepup (boost) converter with a wide input voltage range of
  0.7V to 5V and an output voltage range of 1.5V to 5.25V.
  Housed in a 2mm Г— 2mm DFN package, the LTC3526L has a typical startup voltage of just 700mV, with operation
  down to 400mV once started. Despite the LTC3526L’s …

Modellreihe

Herstellerklassifikation

• Power Management > Switching Regulator > Step-Up (Boost) Regulators > Micropower Boost | Internal Power Switch Boost
• Power Management > Energy Harvesting

Andere Namen:

LTC3526LEDCTRMPBF, LTC3526LEDC TRMPBF