Datasheet Linear Technology LTC1452CS8#TRPBF — Datenblatt

Hersteller	Linear Technology
Serie	LTC1452
Artikelnummer	LTC1452CS8#TRPBF

12-Bit-Rail-to-Rail-Mikropower-DACs in SO-8

Datenblätter

PDF, 199 Kb, Revision: S, Datei hochgeladen: Aug 22, 2017

Auszug aus dem Dokument

Andere Optionen

LTC1451 LTC1453

Konstruktionshinweise

Herunterladen
12-Bit Rail-to-Rail Micropower DACs in an SO-8 &mdash DN96
PDF, 76 Kb, Datei veröffentlicht: Feb 1, 1995
Auszug aus dem Dokument
12-Bit Rail-to-Rail Micropower DACs in an SO-8
Design Note 96
Hassan Malik and Jim Brubaker
The LTC В®1451, LTC1452 and LTC1453 are complete,
single supply, rail-to-rail voltage output 12-bit digitalto-analog (DAC) converters. They include an output
buffer ampliп¬Ѓer and a space saving SPI compatible
three-wire serial interface. There is also a data output pin
that allows daisy-chaining multiple DACs. These DACs
use a proprietary architecture which guarantees a DNL
(Differential Nonlinearity) error of less than 0.5LSB. The
typical DNL error is about 0.2LSB as shown in FigureВ 1.
There is a built-in power-on reset that resets the output
to zero scale. The output ampliп¬Ѓer can swing to within
5mV of VCC when unloaded and can source or sink 5mA
even at a 4.5V supply. These DACs come in an 8-pin
PDIP and SO-8 package.
5V and 3V Operation
The LTC1451 has an on-board reference of 2.048V and
a nominal output swing of 4.095V. It operates from a
single 4.5V to 5.5V supply dissipating 2mW (ICC(TYP)
= 400ОјA).
The LTC1452 is a multiplying DAC with no on-board
reference and a full-scale output of twice the reference …

Modellreihe

Serie: LTC1452 (6)

LTC1452CN8#PBF LTC1452CS8#PBF LTC1452CS8#TRPBF LTC1452IN8#PBF LTC1452IS8#PBF LTC1452IS8#TRPBF

Herstellerklassifikation

Data Conversion > Digital-to-Analog Converters (DAC) > Voltage Output DACs | Unipolar Digital-to-Analog Converters (DAC)

Andere Namen:

LTC1452CS8TRPBF, LTC1452CS8 TRPBF

Kontakte