Datasheet Analog Devices ADA4692-2ARZ-R7 — Datenblatt

Low Power, 3.6 MHz, Low Noise, Rail-toRail Output, Operational Amplifiers
ADA4691-2/ADA4691-4/ADA4692-2/ADA4692-4 Low power: 180 μA typical
Very low input bias currents: 0.5 pA typical
Low noise: 16 nV/√Hz typical
3.6 MHz bandwidth
Offset voltage: 500 μV typical
Low offset voltage drift: 4 μV/°C maximum
Low distortion: 0.003% THD + N
2.7 V to 5 V single supply or ±1.35 V to ±2.5 V dual supply
Available in very small 2 mm × 2 mm LFCSP packages The ADA4691/ADA4692 family is fully specified over the
extended industrial temperature range (−40°C to +125°C).
The ADA4691-2 is available in a 10-lead LFCSP and a 9-ball
WLCSP. The ADA4692-2 is available in an 8-lead SOIC and 8-lead
LFCSP. The ADA4691-4 is available in a 16-lead LFCSP. The
ADA4692-4 is available in a 14-lead TSSOP. For pin configurations,
see the Pin Configurations section.
1 APPLICATIONS
0.1
THD + N (%) Photodiode amplifiers
Sensor amplifiers
Portable medical and instrumentation
Portable audio: MP3s, PDAs, and smartphones
Communications …

Low Power, 3.6 MHz, Low Noise, Rail-toRail Output, Operational Amplifiers
ADA4691-2/ADA4691-4/ADA4692-2/ADA4692-4 1
ADA4692-2
VSY = ±2.5V
AV = –1
TA = 25°C APPLICATIONS
0.1 THD + N (%) Photodiode amplifiers
Sensor amplifiers
Portable medical and instrumentation
Portable audio: MP3s, PDAs, and smartphones
Communications
Low-side current sense
ADC drivers
Active filters
Sample-and-hold RL = 600Ω
RL = 2kΩ
0.01 0.001
10 GENERAL DESCRIPTION These amplifiers are ideal for a wide variety of applications.
Audio, filters, photodiode amplifiers, and charge amplifiers, all
benefit from this combination of performance and features.
Additional applications for these amplifiers include portable
consumer audio players with low noise and low distortion that
provide high gain and slew rate response over the audio band at …