Datasheet Linear Technology LT1167-1 — Datenblatt

Hersteller	Linear Technology
Serie	LT1167-1

Programmierbarer Präzisionsinstrumentenverstärker mit Einzelwiderstandsverstärkung

Datenblätter

Vorschau und Herunterladen

PDF, 368 Kb, Sprache: en, Datei hochgeladen: Aug 6, 2017, Seiten: 22
Single Resistor Gain Programmable, Precision Instrumentation Amplifier

Auszug aus dem Dokument

Preise

Verpackung

	LT1167ACS8-1#PBF	LT1167ACS8-1#TRPBF	LT1167AIS8-1#PBF	LT1167AIS8-1#TRPBF	LT1167CS8-1#PBF	LT1167CS8-1#TRPBF	LT1167IS8-1#PBF	LT1167IS8-1#TRPBF
N	1	2	3	4	5	6	7	8
Package	SO-8 Paketumrisszeichnung	SO-8 Paketumrisszeichnung	SO-8 Paketumrisszeichnung	SO-8 Paketumrisszeichnung	SO-8 Paketumrisszeichnung	SO-8 Paketumrisszeichnung	SO-8 Paketumrisszeichnung	SO-8 Paketumrisszeichnung
Package Code	S8	S8	S8	S8	S8	S8	S8	S8
Package Index	05-08-1610 (S8)	05-08-1610 (S8)	05-08-1610 (S8)	05-08-1610 (S8)	05-08-1610 (S8)	05-08-1610 (S8)	05-08-1610 (S8)	05-08-1610 (S8)
Pin Count	8	8	8	8	8	8	8	8

Parameter

Parameters / Models	LT1167ACS8-1#PBF	LT1167ACS8-1#TRPBF	LT1167AIS8-1#PBF	LT1167AIS8-1#TRPBF	LT1167CS8-1#PBF	LT1167CS8-1#TRPBF	LT1167IS8-1#PBF	LT1167IS8-1#TRPBF
Common Mode Rejection Ratio, dB	140	140	140	140	140	140	140	140
Number of Channels	1	1	1	1	1	1	1	1
Cload, pF	1000	1000	1000	1000	1000	1000	1000	1000
Design Tools	LTspice Model	LTspice Model	LTspice Model	LTspice Model	LTspice Model	LTspice Model	LTspice Model	LTspice Model
Enoise Density, nV/rtHz	7.5	7.5	7.5	7.5	7.5	7.5	7.5	7.5
Export Control	no	no	no	no	no	no	no	no
GBW, MHz	1	1	1	1	1	1	1	1
Gain, V/V	Resistor Set 1 to 10,000	Resistor Set 1 to 10,000	Resistor Set 1 to 10,000	Resistor Set 1 to 10,000	Resistor Set 1 to 10,000	Resistor Set 1 to 10,000	Resistor Set 1 to 10,000	Resistor Set 1 to 10,000
Gain Accuracy, %	0.008	0.008	0.008	0.008	0.008	0.008	0.008	0.008
Gain Drift, ppm/C	20	20	20	20	20	20	20	20
Ibias, nA	0.05	0.05	0.05	0.05	0.05	0.05	0.05	0.05
Inoise, pA/rtHz	0.124	0.124	0.124	0.124	0.124	0.124	0.124	0.124
Ios, µA	0.00009	0.00009	0.00009	0.00009	0.00009	0.00009	0.00009	0.00009
Iout, mA	27	27	27	27	27	27	27	27
Isupply, mA	0.9	0.9	0.9	0.9	0.9	0.9	0.9	0.9
LF Enoise, µVPP	0.28	0.28	0.28	0.28	0.28	0.28	0.28	0.28
Operating Temperature Range, °C	0 to 70	0 to 70	-40 to 85	-40 to 85	0 to 70	0 to 70	-40 to 85	-40 to 85
PSRR, dB	150	150	150	150	150	150	150	150
Rail-to-Rail In	no	no	no	no	no	no	no	no
Rail-to-Rail Out	no	no	no	no	no	no	no	no
SR, V/µs	1.2	1.2	1.2	1.2	1.2	1.2	1.2	1.2
Shutdown	no	no	no	no	no	no	no	no
Single Supply	no	no	no	no	no	no	no	no
Ts (0.1%), ns	14000	14000	14000	14000	14000	14000	14000	14000
Type	IA	IA	IA	IA	IA	IA	IA	IA
Voh (from V+), V	1.2	1.2	1.2	1.2	1.2	1.2	1.2	1.2
Vol (from V-), V	1.1	1.1	1.1	1.1	1.1	1.1	1.1	1.1
Vos, µV	15	15	15	15	15	15	15	15
Vos TC, µV/C	0.05	0.05	0.05	0.05	0.05	0.05	0.05	0.05
Vs Max, V	40	40	40	40	40	40	40	40
Vs Min, V	4.6	4.6	4.6	4.6	4.6	4.6	4.6	4.6

Öko-Plan

	LT1167ACS8-1#PBF	LT1167ACS8-1#TRPBF	LT1167AIS8-1#PBF	LT1167AIS8-1#TRPBF	LT1167CS8-1#PBF	LT1167CS8-1#TRPBF	LT1167IS8-1#PBF	LT1167IS8-1#TRPBF
RoHS	Compliant	Compliant	Compliant	Compliant	Compliant	Compliant	Compliant	Compliant

Andere Optionen

LT1167 LT1167

Anwendungshinweise

Herunterladen
Linear Technology Magazine Circuit Collection, Volume V: Data Conversion, Interface and Signal Conditioning Products &mdash AN87
PDF, 1.5 Mb, Datei veröffentlicht: Nov 1, 2000
Application Note 87 is the fifth in a series that excerpts useful circuits from Linear Technology magazine. Data conversion, interface and signal conditioning circuits from issue VI:1 (February 1996) through issue VIII:4 (November 1998) are featured. Like its predecessor, AN67, this Application Note includes circuits for high speed video, interface and hot swap circuits, active RC and switched capacitor filter circuitry and a variety of data conversion and instrumentation circuits. All circuits are conveniently indexed by type.
Auszug aus dem Dokument
Application Note 87
November 2000 Linear Technology Magazine Circuit Collection, Volume V
Data Conversion, Interface and Signal Conditioning Products
Richard Markell, Editor
INTRODUCTION
Application Note 87 is the fifth in a series that excerpts
useful circuits from Linear Technology magazine to preserve them for posterity. This application note highlights
data conversion, interface and signal conditioning circuits
from issue VI:1 (February 1996) through issue VIII:4
(November 1998). Like its predecessor, AN67, this Application Note includes circuits for high speed video, interface and hot swap circuits, active RC and switched capacitor filter circuitry and a variety of data conversion and instrumentation circuits. There are also several circuits
that cannot be so neatly categorized. So, without further
ado, IвЂ™ll let the authors describe their circuits.
Note: Article Titles appear in this application note exactly
as they originally appeared in Linear Technology magazine. This may result in some inconsistency in the usage
of terminology. TABLE OF CONTENTS
Introduction . 1
DATA CONVERTERS
The LTCВ®1446 and LTC1446L: WorldвЂ™s First Dual 12-Bit DACs in SO-8 Packages . 3
Multichannel A/D Uses a Single Antialiasing Filter. 4
LTC1454/54L and LTC1458/58L: Dual and Quad 12-Bit, Rail-to-Rail, Micropower DACs . 5
Micropower ADC and DAC in SO-8 Give PC 12-Bit Analog Interface . 7
The LTC1594 and LTC1598: Micropower 4-and 8-Channel 12-Bit ADCs . 10
MUX the LTC1419 Without Software . 13 …

Konstruktionshinweise

Herunterladen
The LT1167: Single Resistor Sets the Gain of the Best Instrumentation Amplifier &mdash DN182
PDF, 87 Kb, Datei veröffentlicht: Jun 1, 1998
Auszug aus dem Dokument
The LT1167: Single Resistor Sets the Gain of the Best
Instrumentation Amplifier вЂ“ Design Note 182
Alexander Strong and Kevin R. Hoskins
Introduction
Linear TechnologyвЂ™s next generation LTВ®1167 instrumentation ampliп¬Ѓer uses a single resistor to set gains
from 1 to 10,000. The single gain-set resistor eliminates
expensive resistor arrays and improves VOS and CMRR
performance. Careful attention to circuit design and
layout, combined with laser trimming, greatly enhances
the CMRR, PSRR, gain error and nonlinearity, maximizing application versatility. The CMRR is guaranteed to
be greater than 90dB when the LT1167вЂ™s gain is set at
1. Total input offset voltage (VOS) is less than 60ОјV at a
gain of 10. For gains in the range of 1 to 100, gain error
is less than 0.05%, making the gain-set resistor tolerance the dominant source of gain error. The LT1167вЂ™s
gain nonlinearity is unsurpassed when compared to
other monolithic solutions. It is speciп¬Ѓed at less than
40ppm when operating at a gain of 1000 while driving
a 2kО© load. The LT1167 is so robust that it can drive
600О© loads without a signiп¬Ѓcant linearity penalty. These
parametric improvements result in an overall gain error
that remains unchanged over the entire input common
mode range and is not degraded by supply perturbations
or varying load conditions. The LT1167 can operate over …
Herunterladen
Resolving Very Small Temperature Differences with the LTC2402 &mdash DN257
PDF, 75 Kb, Datei veröffentlicht: May 2, 2001
Auszug aus dem Dokument
Resolving Very Small Temperature Differences
with the LTC2402 вЂ“ Design Note 257
Derek Redmayne
The LTC В®2402, a 2-channel 24-bit, No Latency
Delta-Sigmaв„ў ADC, is well-suited to differential
temperature sensing using a number of different
sensors. Extremely good matching between channels
allows two absolute temperature measurements to
be compared in order to determine the differential or
gradient between two points. In the circuits shown
below, the LTC2402, with averaging, can resolve a
temperature differential of a few millidegrees, although
in the case of a single-shot pair of readings, a peak error
of 0.05В°C is possible. Independently adjustable full-scale
(FSSET ) and zero-scale (ZSSET ) facilitate 3-or 4-wire
measurements with platinum RTDs and the automatic
sequencing of the two channels makes measurements
across an isolation barrier easier. The no latency feature
of these ADCs also resolves dilemmas associated
with pulsed excitation. The use of pulsed excitation
minimizes or eliminates parasitic thermocouple effects
that can compromise RTD measurements. In addition,
pulsed excitation can reduce standby or average power …

Artikel

Herunterladen
Designing the LT1167 Instrumentation Amplifier into a Single 5V Supply Application &mdash LT Journal
PDF, 119 Kb, Datei veröffentlicht: Jun 1, 1999
Auszug aus dem Dokument
DESIGN IDEAS Designing the LT1167
by Adolfo A. Garcia
Instrumentation Amplifier
into a Single 5V Supply Application
Introduction Circuit Operation
operate near the sensor or circuitвЂ™s
positive supply voltage or ground
(common). Even though the signal
conditioning circuitry need not operate at the extremes of the supply
voltage range, the output voltage swing
of the circuit should be as large as
possible for maximum dynamic range.
The circuit illustrated in Figure 1
achieves high precision performance
while operating from a single 5V
supply. The trick here is to reference
the dual-supply instrumentation
amplifierвЂ™s inputs to a stable midpoint supply and then follow the
instrumentation amplifier with a
single-supply precision operational
amplifier with a rail-to-rail output
stage. This вЂњcompositeвЂќ instrumentation amplifier uses an LT1167 (a high
performance instrumentation amplifier in an SO-8 package) for the input …
Herunterladen
The LT1167: Precision, Low Cost, Low Power Instrumentation Amplifier Requires a Single Gain-Set Resistor &mdash LT Journal
PDF, 294 Kb, Datei veröffentlicht: May 1, 1998
Auszug aus dem Dokument
DESIGN FEATURES The LT1167: Precision, Low Cost,
Low Power Instrumentation Amplifier
Requires a Single Gain-Set Resistor
by Alexander Strong
Introduction Input Protection The LT1167 is the next-generation
instrumentation amplifier designed
to replace the previous generation of
monolithic instrumentation amps, as
well as discrete, multiple op amp
solutions. Instrumentation amplifiers differ from operational amplifiers
in that they can amplify input signals
that are not ground referenced. The
output of an instrumentation amplifier is referenced to an external voltage
that is independent of the input. Conversely, the output voltage of an op
amp, due to the nature of its feedback, is referenced to the differential
and common mode input voltage.
A separate ground reference and
the high CMRR of the LT1167 instrumentation amplifier reduce the effect
of the input common mode voltage on
the output signal. The closed-loop
gain of an op amp and of most instrumentation amps is set by a resistor
ratio; the gain of the LT1167 is set by
the absolute value of one external …
Herunterladen
New Instrumentation Amplifier: Single-Resistor Gain Set and Precision Front End Make Accuracy Easy &mdash LT Journal
PDF, 159 Kb, Datei veröffentlicht: May 1, 2000
Auszug aus dem Dokument
DESIGN FEATURES New Instrumentation Amplifier: SingleResistor Gain Set and Precision Front
End Make Accuracy Easy
by Glen Brisebois
The LT1168 is a low power,
single-resistor gain-programmable
instrumentation amplifier that is easy
to apply. It is a pin-compatible upgrade
for the AD620 (and the INA118 with a
resistor-value change) and is available in C and I grades. With negligible
60ВµV (Max) offset voltage and ultrahigh 1Tв„¦ input impedance, it can
sense bridges with source impedances
from 10в„¦ to 100k without degrading
the signal. Its 120dB CMRR at 60Hz
(AV = 100V) is achieved even with a 1k
source impedance imbalance. Matching the LT1168вЂ™s CMRR using discrete
op amps would require the use of
0.001% resistors. The LT1168вЂ™s
robust inputs meet IEC1000-4-2
Level 4 ESD tests with the addition of
two external 5k series resistors. These
5k resistors will contribute only a
negligible 6ВµV of DC error. Table 1. Examples of series resistors for precision gain Desired Gain RG
(Theoretical) RG1 …
Herunterladen
Small, Portable Altimeter Operates from a Single Cell &mdash LT Journal
PDF, 44 Kb, Datei veröffentlicht: May 1, 2002
Auszug aus dem Dokument
DESIGN IDEAS Small, Portable Altimeter Operates
from a Single Cell
by Todd Owen
free descentвЂ”limited by the engineer's
parasitic dragвЂ”to 3000ft. Subsequent
deployment of an aerodynamic decelerator (Precision Aerodynamics Icarus
Omega 190) prevented engineer injury or circuit damage. Aircraft rental
for testing is available at many local
airports. Extensive instruction in free
descent and the use of aerodynamic
decelerators are highly recommended
before undertaking testing of this
nature. Contact USPA at (703) 8363495 for further information. вЂ“5V
D2 10ВµF 10ВµF D1 + Linear Technology Magazine May 2002 R2 performs gain calibration in the
signal-conditioning circuitry. This
potentiometer calibrates out any normal variations in part tolerances and
sets the altimeter for a 100mV change
in output for every 1000ft of altitude.
The circuit has some initial offset, as
well as an offset that is determined by
barometric pressure variations. You
can use R3 to R5 to null this offset,
giving a 0V to 1V output for 0ft to …

Modellreihe

Serie: LT1167-1 (8)

LT1167ACS8-1#PBF LT1167ACS8-1#TRPBF LT1167AIS8-1#PBF LT1167AIS8-1#TRPBF LT1167CS8-1#PBF LT1167CS8-1#TRPBF LT1167IS8-1#PBF LT1167IS8-1#TRPBF

Herstellerklassifikation

Signal Conditioning > Amplifiers > Instrumentation Amplifiers
Signal Conditioning > Amplifiers > Operational Amplifiers (Op Amps) > High Voltage Amplifiers (>12V) | Low Noise Amplifiers (