Datasheet Texas Instruments TMS320R2812 — Datenblatt

HerstellerTexas Instruments
SerieTMS320R2812
Datasheet Texas Instruments TMS320R2812

32-Bit-Digital-Signal-Controller mit RAM

Datenblätter

TMS320R2811, TMS320R2812 Digital Signal Processors datasheet
PDF, 2.5 Mb, Revision: C, Datei veröffentlicht: Jun 26, 2006
Auszug aus dem Dokument

Preise

Status

TMS320R2812GHHATMS320R2812GHHSTMS320R2812PGFATMS320R2812PGFQTMS320R2812PGFSTMS320R2812ZHHATMS320R2812ZHHS
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Obsolete (Manufacturer has discontinued the production of the device)Obsolete (Manufacturer has discontinued the production of the device)Obsolete (Manufacturer has discontinued the production of the device)
Manufacture's Sample AvailabilityNoNoNoNoNoNoNo

Verpackung

TMS320R2812GHHATMS320R2812GHHSTMS320R2812PGFATMS320R2812PGFQTMS320R2812PGFSTMS320R2812ZHHATMS320R2812ZHHS
N1234567
Pin179179176176176179179
Package TypeGHHGHHPGFPGFPGFZHHZHH
Industry STD TermBGA MICROSTARBGA MICROSTARLQFPLQFPLQFPBGA MICROSTARBGA MICROSTAR
JEDEC CodeS-PBGA-NS-PBGA-NS-PQFP-GS-PQFP-GS-PQFP-GS-PBGA-NS-PBGA-N
Package QTY1601604040
CarrierEIAJ TRAY (5+1)JEDEC TRAY (5+1)
Device MarkingR2812GHHATMS320TMS320TMS320TMS320R2812ZHHAR2812ZHHS
Width (mm)12122424241212
Length (mm)12122424241212
Thickness (mm).9.91.41.41.4.9.9
Pitch (mm).8.8.5.5.5.8.8
Max Height (mm)1.41.41.61.61.61.41.4
Mechanical DataHerunterladenHerunterladenHerunterladenHerunterladenHerunterladenHerunterladenHerunterladen

Parameter

Parameters / ModelsTMS320R2812GHHA
TMS320R2812GHHA
TMS320R2812GHHS
TMS320R2812GHHS
TMS320R2812PGFA
TMS320R2812PGFA
TMS320R2812PGFQ
TMS320R2812PGFQ
TMS320R2812PGFSTMS320R2812ZHHATMS320R2812ZHHS
ADC, Ch16161616
ADC (Ch)161616
ADC Resolution12-bit12-bit12-bit12-bit
Additional FeaturesExternal Interface (XINTF),Single Zone Code Security,32-bit CPU Timers,Watchdog Timer,2-pin Oscillator,AEC-Q100 Automotive QualExternal Interface (XINTF),Single Zone Code Security,32-bit CPU Timers,Watchdog Timer,2-pin Oscillator,AEC-Q100 Automotive QualExternal Interface (XINTF),Single Zone Code Security,32-bit CPU Timers,Watchdog Timer,2-pin Oscillator,AEC-Q100 Automotive QualExternal Interface (XINTF),Single Zone Code Security,32-bit CPU Timers,Watchdog Timer,2-pin Oscillator,AEC-Q100 Automotive QualExternal Interface (XINTF)
Single Zone Code Security
32-bit CPU Timers
Watchdog Timer
2-pin Oscillator
AEC-Q100 Automotive Qual
External Interface (XINTF)
Single Zone Code Security
32-bit CPU Timers
Watchdog Timer
2-pin Oscillator
AEC-Q100 Automotive Qual
External Interface (XINTF)
Single Zone Code Security
32-bit CPU Timers
Watchdog Timer
2-pin Oscillator
AEC-Q100 Automotive Qual
Analog to Digital Converter, ADCADC12: 2-S/H, 12.5-MSPSADC12: 2-S/H, 12.5-MSPSADC12: 2-S/H, 12.5-MSPSADC12: 2-S/H, 12.5-MSPS
Analog to Digital Converter (ADC)ADC12: 2-S/H
12.5-MSPS
ADC12: 2-S/H
12.5-MSPS
ADC12: 2-S/H
12.5-MSPS
Approx. Price (US$)10.65 | 1ku10.65 | 1ku10.65 | 1ku
CAN1111
CAP6666666
CPUC28xC28xC28xC28xC28xC28xC28x
FPUNoNoNoNo
Frequency, MHz150150150150
Frequency(MHz)150150150
GPIO56565656565656
Operating Temperature Range, C-40 to 125,-40 to 85-40 to 125,-40 to 85-40 to 125,-40 to 85-40 to 125,-40 to 85
Operating Temperature Range(C)-40 to 125
-40 to 85
-40 to 125
-40 to 85
-40 to 125
-40 to 85
Other Actuation FeaturesN/AN/AN/AN/AN/AN/AN/A
Other Connectivity FeaturesMcBSP,CANMcBSP,CANMcBSP,CANMcBSP,CANMcBSP
CAN
McBSP
CAN
McBSP
CAN
Other Sensing FeaturesN/AN/AN/AN/AN/AN/AN/A
PWM, Ch16161616
PWM Technology TypeEVEVEVEVEVEVEV
PWM(Ch)161616
Package GroupBGA MICROSTARBGA MICROSTARLQFPLQFPLQFPBGA MICROSTARBGA MICROSTAR
Package Size: mm2:W x L, PKG179BGA MICROSTAR: 144 mm2: 12 x 12(BGA MICROSTAR)179BGA MICROSTAR: 144 mm2: 12 x 12(BGA MICROSTAR)176LQFP: 576 mm2: 24 x 24(LQFP)176LQFP: 576 mm2: 24 x 24(LQFP)
Package Size: mm2:W x L (PKG)176LQFP: 676 mm2: 26 x 26(LQFP)179BGA MICROSTAR: 144 mm2: 12 x 12(BGA MICROSTAR)179BGA MICROSTAR: 144 mm2: 12 x 12(BGA MICROSTAR)
Processing AcceleratorsN/AN/AN/AN/AN/AN/AN/A
QEP2222222
RAM, KB40404040
RAM(KB)404040
RatingCatalogCatalogCatalogCatalogCatalogCatalogCatalog
SPI1111111
Total Processing, MIPS150150150150
Total Processing (MIPS)150150150
UART2222222

Öko-Plan

TMS320R2812GHHATMS320R2812GHHSTMS320R2812PGFATMS320R2812PGFQTMS320R2812PGFSTMS320R2812ZHHATMS320R2812ZHHS
RoHSSee ti.comSee ti.comCompliantCompliantNot CompliantNot CompliantNot Compliant
Pb FreeNoNoNo

Anwendungshinweise

  • TMS320F281x Boot ROM Serial Flash Programming
    PDF, 5.5 Mb, Datei veröffentlicht: Oct 11, 2007
    This application report describes the implementation of TI's Flash application program interface (API), the software interface to TI's Flash algorithms. Understanding the fundamentals of the Flash API documentation prior to using this application report is important. This document does not replace the Flash API documentation; instead, it guides you among several sets of TI documentation with the F
  • Signal Conditioning an LVDT Using a TMS320F2812 DSP
    PDF, 428 Kb, Datei veröffentlicht: Aug 15, 2003
    A linear variable differential transformer (LVDT) is a type of electro-mechanical transducer capable of measuring linear displacement with a high degree of accuracy. The transducer requires external electronic circuitry to produce a stable reference oscillator, and condition the return signal in order to determine displacement. Traditional LVDT circuits are based on analog design techniques, and s
  • Programming Examples for the TMS320x28xx eCAN (Rev. B)
    PDF, 73 Kb, Revision: B, Datei veröffentlicht: Sep 12, 2017
    The TMS320x28xx series of Microcontrollers/Digital Signal Controllers feature an on-chip enhanced Controller Area Network (eCAN) module. This module is a full-CAN controller, compliant with CAN specification 2.0B. This application report contains several programming examples, supplemental to those in C2000Ware/controlSUITE, to illustrate how the eCAN module is set up for different modes of operati
  • DSP Control of Electro-Hydraulic Servo Actuators
    PDF, 574 Kb, Datei veröffentlicht: Jan 28, 2005
    Hydraulic actuators are characterized by their ability to impart large forces at high speeds and are used in many industrial motion systems. In applications where good dynamic performance is important it is common to contain the actuator in a servo loop comprising a feedback transducer and electronic controller. The majority of electronic servo-controllers used in these systems are analogue based
  • Spread-Frequency Shift Keying Power Line Modem Software Architecture
    PDF, 703 Kb, Datei veröffentlicht: Jun 16, 2006
    This application report describes the software architecture and design of the Spread-Frequency Shift Keying Power Line Modem demonstration platform. Each demonstration unit consists of an eZdsp DSP developer's board plus a daughter card. The daughter card contains electronics that shape and amplify the power line communications (PLC) transmit signal, filter the PLC receive signal, handle RS-232 se
  • DSP Solutions for the Switched Reluctance Motor
    PDF, 112 Kb, Datei veröffentlicht: Jan 1, 1997
    This document deals with solutions to control a switched reluctance motor using the TMS320C24x. This new DSP family enables cost-effective design of intelligent controllers for switched reluctance motors. Two speed control algorithms are presented, they allow the Switched Reluctance motor drive to reach high efficiency, smooth operation, very good dynamic behavior, very high speed and low acoustic
  • A Variable-Speed Sensorless Drive System for Switched Reluctance Motors
    PDF, 246 Kb, Datei veröffentlicht: Oct 30, 1999
    With the advent of high-speed digital signal processors (DSPs) specialized for motion control applications, it has become possible to control motors without mechanical (speed or position) sensors. This is achieved by algorithms that estimate the desired quantities in real time, based on the electrical signals in the motor windings. Benefits include cost savings and improved reliability due to redu
  • Optimizing Digital Motor Control Libraries
    PDF, 365 Kb, Datei veröffentlicht: Mar 15, 2007
    The DMC library contains a collection of component modules and system implementations, which are intended for evaluation, accelerated design, and development of motor control firmware.The software is intended to meet these goals, and no optimization is performed.As system designers implement systems, they must optimize their systems for performance in terms of memory consumption and CPU cyc
  • Migrating Code Composer v4.12 Projects to Code Composer Studio v2.0
    PDF, 117 Kb, Datei veröffentlicht: Jul 11, 2002
    This application report describes the process of migrating an existing Code Composer v4.12 project to a Code Composer Studio? Integrated Development Environment (IDE) v2 project.
  • TMS320x281x to TMS320x280x/2801x/2804x Migration Overview (Rev. A)
    PDF, 124 Kb, Revision: A, Datei veröffentlicht: Oct 5, 2006
    This application report describes differences between the Texas Instruments TMS320x281x and TMS320x280x/2801x/2804x DSPs to assist in application migration from the 281x to the 280x. While the main focus of this document is migration from 281x to 280x/2801x/2804x, users considering migrating in the reverse direction (280x to 281x) will also find this document useful. Functions that are identical
  • Recommended Power Solutions for the TMS320x2810/1/2 DSPs
    PDF, 28 Kb, Datei veröffentlicht: Jan 31, 2005
    This application report provides a table to assist users in selecting the best power solution for their specific TMS320281x application.
  • Interfacing SD/MMC Cards With TMS320F28xxx DSCs
    PDF, 1.3 Mb, Datei veröffentlicht: Jul 26, 2007
    This application report and associated code implements the interfacing of Secure Digital (SD) or Multi-Media Card (MMC) types of Flash memory cards with the TMS320F28xxx digital signal controllers (DSCs). These cards can use serial peripheral interface (SPI) or parallel (SD) interface to connect to the host. This application report demonstrates the SPI mode and includes the schematics showing th
  • Custom Bootloader Options via One-Time Programmable (OTP) Memory
    PDF, 62 Kb, Datei veröffentlicht: Sep 18, 2007
    The Boot to One-Time-Programmable (OTP) memory mode in the TMS320x280x devices provides the necessary hooks to support custom bootloaders. This is very useful in a situation where a bootloader option, required by a specific customer application, is not already supported as one of the built-in options in the Boot read-only memory (ROM). This application report includes information and examples on h
  • An Easy Way of Creating a C-callable Assembly Function for the TMS320C28x DSP
    PDF, 185 Kb, Datei veröffentlicht: Oct 30, 2001
    C-callable assembly routines require an understanding of parameter-passing conventions and environments expected by the C compiler. This application report provides instructions and suggestions to configure the C compiler to assist with these issues.
  • An Overview of Designing Analog Interface With TM320F28xx/28xxx DSCs (Rev. A)
    PDF, 655 Kb, Revision: A, Datei veröffentlicht: May 14, 2008
    This application report provides guidelines that take you through everything from configuring the ADC and related registers correctly, responding to interrupts, and board design recommendations; this may be particularly useful for first-time users of the TMS320C2000в„ў digital signal processor (DSP) platform devices and for firmware engineers with less exposure to the analog world. Various s
  • Online Stack Overflow Detection on the TMS320C28x DSP
    PDF, 407 Kb, Datei veröffentlicht: May 2, 2003
    A stack overflow in an embedded DSP application generally produces a catastrophic software crash due to data corruption, lost return addresses, or both. Traditional off-line approaches to sizing a stack during development, such as filling with a know value, or estimating based on code content, are not 100% reliable. Therefore, programmers often feel compelled to reserve larger stack sizes than are
  • Programming TMS320x28xx and 28xxx Peripherals in C/C++ (Rev. D)
    PDF, 530 Kb, Revision: D, Datei veröffentlicht: Feb 27, 2013
    This application report explores a hardware abstraction layer implementation to make C/C++ coding easier on C28x devices. This method is compared to traditional #define macros and topics of code efficiency and special case registers are also addressed.
  • Flash Programming Solutions for the TMS320F28xxx DSCs
    PDF, 423 Kb, Datei veröffentlicht: Aug 19, 2008
    Flash programming is a process that occurs during all stages of a TMS320F28xxx digital signal controller (DSC) development cycle: firmware debug, prototyping, production, and field reprogramming. Several solutions are available to accommodate programming for all of these development stages. This application report presents solutions that are available and at what stage in the development cycle the
  • Programming External Nonvolatile Memory Using SDFlash for TMS320C28x Devices
    PDF, 2.0 Mb, Datei veröffentlicht: Nov 16, 2009
    The C28xxx generation of microcontrollers can connect to external nonvolatile memory through a variety of interfaces including parallel, serial peripheral interface (SPI), and inter-integrated circuit (I2C). This application report discusses how to write drivers for your external nonvolatile memory to allow for in-place programming using SDFlash, an application provided by Spectrum Digital, Inc. A
  • Common Object File Format (COFF)
    PDF, 125 Kb, Datei veröffentlicht: Apr 15, 2009

Modellreihe

Herstellerklassifikation

  • Semiconductors> Microcontrollers (MCU)> Performance MCUs> Real-time Control> Fixed-point F280x/1x