Datasheet Texas Instruments TLV8544PWR — Datenblatt

HerstellerTexas Instruments
SerieTLV8544
ArtikelnummerTLV8544PWR
Datasheet Texas Instruments TLV8544PWR

500 nA Quad, RRIO, Nanopower-Operationsverstärker für kostenoptimierte Systeme 14-TSSOP -40 bis 125

Datenblätter

TLV8544, TLV8542 500 nA RRIO Nanopower Operational Amplifier datasheet
PDF, 1.5 Mb, Revision: B, Datei veröffentlicht: Jun 20, 2017
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Verpackung

Pin14
Package TypePW
Industry STD TermTSSOP
JEDEC CodeR-PDSO-G
Package QTY2000
CarrierLARGE T&R
Device MarkingTL8544
Width (mm)4.4
Length (mm)5
Thickness (mm)1
Pitch (mm).65
Max Height (mm)1.2
Mechanical DataHerunterladen

Parameter

Additional FeaturesCost Optimized,EMI Hardened
ArchitectureCMOS
CMRR(Min)60 dB
CMRR(Typ)75 dB
GBW(Typ)0.008 MHz
Iq per channel(Max)0.00064 mA
Iq per channel(Typ)0.0005 mA
Number of Channels4
Offset Drift(Typ)0.8 uV/C
Operating Temperature Range-40 to 125 C
Output Current(Typ)15 mA
Package GroupTSSOP
Package Size: mm2:W x L14TSSOP: 32 mm2: 6.4 x 5(TSSOP) PKG
Rail-to-RailIn,Out
RatingCatalog
Slew Rate(Typ)0.0035 V/us
Total Supply Voltage(Max)3.6 +5V=5, +/-5V=10
Total Supply Voltage(Min)1.7 +5V=5, +/-5V=10
Vn at 1kHz(Typ)264 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)3.1 mV

Öko-Plan

RoHSCompliant

Design Kits und Evaluierungsmodule

  • Evaluation Modules & Boards: DIYAMP-EVM
    Universal Do-It-Yourself (DIY) Amplifier Circuit Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: BOOSTXL-TLV8544PIR
    TLV8544 Quad Nanopower Op amp PIR Motion Detector Demonstration Module
    Lifecycle Status: Active (Recommended for new designs)

Anwendungshinweise

  • Cost-Optimized Opamp Window Comparator for Ultra-low Power PIR Motion Detectors
    PDF, 115 Kb, Datei veröffentlicht: Mar 6, 2017
    A window comparator is a combination of anoninverting and an inverting comparators along withtwo reference voltages. When the signal at the input of the windowcomparator crosses either thresholds, thecorresponding output changes state to an oppositevoltage level at the output.
  • Design of Ultra-Low Power Circuits for Battery-Powered Wireless PIR Motion Detec (Rev. A)
    PDF, 479 Kb, Revision: A, Datei veröffentlicht: May 12, 2017
    In this document, a cost-optimized, ultra-low power op amp interface for wireless battery operated PIR (Passive Infrared) motion detectors is described. A single new 4-channel nanopower operational amplifier, TLV8544, implements the analog signal path, including two gain stages, two bandpass filters, and a window comparator.

Modellreihe

Serie: TLV8544 (1)
  • TLV8544PWR

Herstellerklassifikation

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Ultra-Low-Power Op Amps (<=10uA)