Datasheet Texas Instruments TLC4541 — Datenblatt

HerstellerTexas Instruments
SerieTLC4541
Datasheet Texas Instruments TLC4541

16-Bit 200KSPS ADC Serial Out, Auto PWRDN, Single-Ended-Eingang

Datenblätter

5-V, Low Power- 16-/14-Bit 100-200 KSPS Serial ADC with Auto-Power Down datasheet
PDF, 1.0 Mb, Datei veröffentlicht: Jul 10, 2000
Auszug aus dem Dokument

Preise

Status

TLC4541IDTLC4541IDG4TLC4541IDGKTLC4541IDGKG4TLC4541IDGKR
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)
Manufacture's Sample AvailabilityNoNoNoNoNo

Verpackung

TLC4541IDTLC4541IDG4TLC4541IDGKTLC4541IDGKG4TLC4541IDGKR
N12345
Pin88888
Package TypeDDDGKDGKDGK
Industry STD TermSOICSOICVSSOPVSSOPVSSOP
JEDEC CodeR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-G
Package QTY757580802500
CarrierTUBETUBETUBETUBELARGE T&R
Device Marking4541I4541IALMALMALM
Width (mm)3.913.91333
Length (mm)4.94.9333
Thickness (mm)1.581.58.97.97.97
Pitch (mm)1.271.27.65.65.65
Max Height (mm)1.751.751.071.071.07
Mechanical DataHerunterladenHerunterladenHerunterladenHerunterladenHerunterladen

Parameter

Parameters / ModelsTLC4541ID
TLC4541ID
TLC4541IDG4
TLC4541IDG4
TLC4541IDGK
TLC4541IDGK
TLC4541IDGKG4
TLC4541IDGKG4
TLC4541IDGKR
TLC4541IDGKR
# Input Channels11111
Analog Voltage AVDD(Max), V5.55.55.55.55.5
Analog Voltage AVDD(Min), V4.54.54.54.54.5
ArchitectureSARSARSARSARSAR
Digital Supply(Max), V5.55.55.55.55.5
Digital Supply(Min), V4.54.54.54.54.5
INL(Max), +/-LSB2.52.52.52.52.5
Input Range(Max), V5.55.55.55.55.5
Input TypeSingle-EndedSingle-EndedSingle-EndedSingle-EndedSingle-Ended
Integrated FeaturesOscillatorOscillatorOscillatorOscillatorOscillator
InterfaceSPISPISPISPISPI
Multi-Channel ConfigurationN/AN/AN/AN/AN/A
Operating Temperature Range, C-40 to 85-40 to 85-40 to 85-40 to 85-40 to 85
Package GroupSOICSOICVSSOPVSSOPVSSOP
Package Size: mm2:W x L, PKG8SOIC: 29 mm2: 6 x 4.9(SOIC)8SOIC: 29 mm2: 6 x 4.9(SOIC)8VSSOP: 15 mm2: 4.9 x 3(VSSOP)8VSSOP: 15 mm2: 4.9 x 3(VSSOP)8VSSOP: 15 mm2: 4.9 x 3(VSSOP)
Power Consumption(Typ), mW16.516.516.516.516.5
RatingCatalogCatalogCatalogCatalogCatalog
Reference ModeExtExtExtExtExt
Resolution, Bits1616161616
SINAD, dB84.584.584.584.584.5
SNR, dB8585858585
Sample Rate (max), SPS200kSPS200kSPS200kSPS200kSPS200kSPS
Sample Rate(Max), MSPS0.20.20.20.20.2
THD(Typ), dB-94-94-94-94-94

Öko-Plan

TLC4541IDTLC4541IDG4TLC4541IDGKTLC4541IDGKG4TLC4541IDGKR
RoHSCompliantCompliantCompliantCompliantCompliant

Anwendungshinweise

  • Interfacing the TLC4541 to TMS320C6711 DSP
    PDF, 69 Kb, Datei veröffentlicht: Sep 13, 2002
    This application note presents a method for interfacing the TLC4541 16-bit SAR analog-to-digital converter to the TMS320C6711в„ў DSP McBSP1. The software developed reads 1024 samples continuously from the TLC4541. In an effort to reduce development time, the source code is made available on TI's website.
  • Interfacing the TLC4541 & the DAC7654 to the MSP430F449
    PDF, 877 Kb, Datei veröffentlicht: Aug 12, 2005
    The purpose of this application report is to demonstrate the combination of a serial analog-to-digital converter (ADC) and a serial digital-to-analog converter (DAC) on a development platform. The ADC and the DAC featured are the TLC4541 and the DAC7654, respectively. These devices are presented using the HPA449 as a low-cost development platform. The application report briefly describes each comp
  • Interfacing Low Power Serial (SPI) ADCs to the MSP430F449
    PDF, 407 Kb, Datei veröffentlicht: Feb 4, 2005
    This application report discusses the serial peripheral interface (SPI) implementation of a data acquisition system featuring the following devices: TLV2541, TLC2551, TLC3541, and TLC4541. These analog-to-digital converters (ADC) offer options for users ranging from extremely low power and wide voltage supply range to fast conversion throughput. All devices share a small (MSOP) footprint and are p
  • Determining Minimum Acquisition Times for SAR ADCs, part 2
    PDF, 215 Kb, Datei veröffentlicht: Mar 17, 2011
    The input structure circuit of a successive-approximation register analog-to-digital converter (SAR ADC) incombination with the driving circuit forms a transfer function that can be used to determine minimum acquisition times for different types of applied input signals. This application report, which builds on Determining Minimum Acquisition Times for SAR ADCs When a Step Function is Applied to

Modellreihe

Herstellerklassifikation

  • Semiconductors> Data Converters> Analog-to-Digital Converters (ADCs)> Precision ADCs (<=10MSPS)