Datasheet Texas Instruments THS6053 — Datenblatt

HerstellerTexas Instruments
SerieTHS6053
Datasheet Texas Instruments THS6053

175 mA, +/- 12 V ADSL CPE-Leitungstreiber mit Abschaltung

Datenblätter

175 mA +/-12 V ADSL CPE Line Drivers datasheet
PDF, 1.1 Mb, Revision: D, Datei veröffentlicht: Dec 13, 2001
Auszug aus dem Dokument

Preise

Status

THS6053CPWPRTHS6053IDTHS6053IPWPTHS6053IPWPR
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)
Manufacture's Sample AvailabilityNoNoNoNo

Verpackung

THS6053CPWPRTHS6053IDTHS6053IPWPTHS6053IPWPR
N1234
Pin14141414
Package TypePWPDPWPPWP
Industry STD TermHTSSOPSOICHTSSOPHTSSOP
JEDEC CodeR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-G
Package QTY200050902000
CarrierLARGE T&RTUBETUBELARGE T&R
Device MarkingHS6053CTHS6053IHS6053IHS6053I
Width (mm)4.43.914.44.4
Length (mm)58.6555
Thickness (mm)11.5811
Pitch (mm).651.27.65.65
Max Height (mm)1.21.751.21.2
Mechanical DataHerunterladenHerunterladenHerunterladenHerunterladen

Parameter

Parameters / ModelsTHS6053CPWPR
THS6053CPWPR
THS6053ID
THS6053ID
THS6053IPWP
THS6053IPWP
THS6053IPWPR
THS6053IPWPR
Acl, min spec gain, V/V111
Acl, min spec gain(V/V)1
Additional FeaturesShutdownShutdownShutdownShutdown
Approx. Price (US$)3.33 | 1ku
ArchitectureCurrent FBCurrent FBCurrent FBCurrent FB
BW @ Acl, MHz170170170
BW @ Acl(MHz)170
CMRR(Min), dB595959
CMRR(Min)(dB)59
CMRR(Typ), dB666666
CMRR(Typ)(dB)66
GBW(Typ), MHz170170170
GBW(Typ)(MHz)170
Input Bias Current(Max), pA100000001000000010000000
Input Bias Current(Max)(pA)10000000
Iq per channel(Max), mA777
Iq per channel(Max)(mA)7
Iq per channel(Typ), mA5.25.25.2
Iq per channel(Typ)(mA)5.2
Number of Channels222
Number of Channels(#)2
Offset Drift(Typ), uV/C303030
Offset Drift(Typ)(uV/C)30
Operating Temperature Range, C-40 to 85,0 to 70-40 to 85,0 to 70-40 to 85,0 to 70
Operating Temperature Range(C)-40 to 85
0 to 70
Output Current(Typ), mA175175175
Output Current(Typ)(mA)175
Package GroupHTSSOPSOICHTSSOPHTSSOP
Package Size: mm2:W x L, PKG14HTSSOP: 32 mm2: 6.4 x 5(HTSSOP)14HTSSOP: 32 mm2: 6.4 x 5(HTSSOP)14HTSSOP: 32 mm2: 6.4 x 5(HTSSOP)
Package Size: mm2:W x L (PKG)14SOIC: 52 mm2: 6 x 8.65(SOIC)
Rail-to-RailNoNoNoNo
RatingCatalogCatalogCatalogCatalog
Slew Rate(Typ), V/us170017001700
Slew Rate(Typ)(V/us)1700
Total Supply Voltage(Max), +5V=5, +/-5V=10333333
Total Supply Voltage(Max)(+5V=5, +/-5V=10)33
Total Supply Voltage(Min), +5V=5, +/-5V=10999
Total Supply Voltage(Min)(+5V=5, +/-5V=10)9
Vn at Flatband(Typ), nV/rtHz2.12.12.1
Vn at Flatband(Typ)(nV/rtHz)2.1
Vos (Offset Voltage @ 25C)(Max), mV101010
Vos (Offset Voltage @ 25C)(Max)(mV)10

Öko-Plan

THS6053CPWPRTHS6053IDTHS6053IPWPTHS6053IPWPR
RoHSCompliantCompliantCompliantCompliant
Pb FreeYes

Anwendungshinweise

  • Active Output Impedance for ADSL Line Drivers
    PDF, 636 Kb, Datei veröffentlicht: Nov 26, 2002
    Signal termination is very common in bidirectional communication systems. Termination allows for receiving signals while transmitting different signals at the same time. With the increasing popularity of asymmetrical digital subscriber lines (ADSL), the requirement for a low power line driver amplifier combined with line termination becomes a very difficult goal. This application note examines the
  • Noise Analysis for High Speed Op Amps (Rev. A)
    PDF, 256 Kb, Revision: A, Datei veröffentlicht: Jan 17, 2005
    As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

Modellreihe

Herstellerklassifikation

  • Semiconductors> Amplifiers> Operational Amplifiers (Op Amps)> High-Speed Op Amps (>=50MHz)