Datasheet Texas Instruments SN74ABT541B-Q1 — Datenblatt

HerstellerTexas Instruments
SerieSN74ABT541B-Q1
Datasheet Texas Instruments SN74ABT541B-Q1

Automobilkatalog Oktalpuffer / Treiber mit 3-Zustands-Ausgängen

Datenblätter

Octal Buffer/Driver With 3-State Outputs datasheet
PDF, 723 Kb, Revision: A, Datei veröffentlicht: Jan 22, 2008
Auszug aus dem Dokument

Preise

Status

CABT541BIPWRG4Q1SN74ABT541BIPWRQ1
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)
Manufacture's Sample AvailabilityYesYes

Verpackung

CABT541BIPWRG4Q1SN74ABT541BIPWRQ1
N12
Pin2020
Package TypePWPW
Industry STD TermTSSOPTSSOP
JEDEC CodeR-PDSO-GR-PDSO-G
Package QTY20002000
CarrierLARGE T&RLARGE T&R
Device MarkingAB541IQ1AB541IQ1
Width (mm)4.44.4
Length (mm)6.56.5
Thickness (mm)11
Pitch (mm).65.65
Max Height (mm)1.21.2
Mechanical DataHerunterladenHerunterladen

Parameter

Parameters / ModelsCABT541BIPWRG4Q1
CABT541BIPWRG4Q1
SN74ABT541BIPWRQ1
SN74ABT541BIPWRQ1
Bits88
F @ Nom Voltage(Max), Mhz150150
ICC @ Nom Voltage(Max), mA0.250.25
Operating Temperature Range, C-40 to 85-40 to 85
Output Drive (IOL/IOH)(Max), mA-32/64-32/64
Package GroupTSSOPTSSOP
Package Size: mm2:W x L, PKG20TSSOP: 42 mm2: 6.4 x 6.5(TSSOP)20TSSOP: 42 mm2: 6.4 x 6.5(TSSOP)
RatingAutomotiveAutomotive
Schmitt TriggerNoNo
Technology FamilyABTABT
VCC(Max), V5.55.5
VCC(Min), V4.54.5
Voltage(Nom), V55
tpd @ Nom Voltage(Max), ns3.53.5

Öko-Plan

CABT541BIPWRG4Q1SN74ABT541BIPWRQ1
RoHSCompliantCompliant

Anwendungshinweise

  • Quad Flatpack No-Lead Logic Packages (Rev. D)
    PDF, 1.0 Mb, Revision: D, Datei veröffentlicht: Feb 16, 2004
    Texas Instruments (TI) Quad Flatpack No-lead (QFN) 14/16/20-terminal Pb-free plastic packages meet dimensions specified in JEDEC standard MO-241 allow for board miniaturization and hold several advantages over traditional SOIC SSOP TSSOP and TVSOP packages. The packages are physically smaller have a smaller routing area improved thermal performance and improved electrical parasitics while
  • Advanced BiCMOS Technology (ABT) Logic Characterization Information (Rev. B)
    PDF, 528 Kb, Revision: B, Datei veröffentlicht: Jun 1, 1997
    The purpose of this document is to assist the designers of high-performance digital logic systems in using the advanced BiCMOS technology (ABT) logic family. Detailed electrical characteristics of these bus-interface devices are provided and tables and graphs have been included to compare specific parameters of the ABT family with those of other logic families. In addition typical data is provide
  • Advanced BiCMOS Technology (ABT) Logic Enables Optimal System Design (Rev. A)
    PDF, 115 Kb, Revision: A, Datei veröffentlicht: Mar 1, 1997
    Advanced bus-interface logic (ABIL) products processed in submicron advanced BiCMOS technologies (ABT) address the specific end-equipment demands of workstations personal and portable computers and telecommunications markets. This document discusses ABIL as system bus interfaces the merits of ABT its I/O structure packaging and ABT products for end-equipment specific solutions.
  • Family of Curves Demonstrating Output Skews for Advanced BiCMOS Devices (Rev. A)
    PDF, 80 Kb, Revision: A, Datei veröffentlicht: Dec 1, 1996
    This document shows the output skew for the ABT16254 ABT16952 and ABT16500A devices of the TI advanced BiCMOS (ABT) family. The data samples show which output skew is being examined where the data originates and how it is analyzed. Some errors present in the data are discussed. Skew curves at varying temperatures are given for the ABT16240 ABT16245 ABT16952 ABT16500A and ABT16249 devic
  • Bus-Interface Devices With Output-Damping Resistors Or Reduced-Drive Outputs (Rev. A)
    PDF, 105 Kb, Revision: A, Datei veröffentlicht: Aug 1, 1997
    The spectrum of bus-interface devices with damping resistors or balanced/light output drive currently offered by various logic vendors is confusing at best. Inconsistencies in naming conventions and methods used for implementation make it difficult to identify the best solution for a given application. This report attempts to clarify the issue by looking at several vendors? approaches and discussi
  • Understanding Advanced Bus-Interface Products Design Guide
    PDF, 253 Kb, Datei veröffentlicht: May 1, 1996
  • Power-Up 3-State (PU3S) Circuits in TI Standard Logic Devices
    PDF, 209 Kb, Datei veröffentlicht: May 10, 2002
    Many telecom and networking applications require that cards be inserted and extracted from a live backplane without interrupting data or damaging components. To achieve this interface terminals of the card must be electrically isolated from the bus system during insertion or extraction from the backplane. To facilitate this Texas Instruments provides bus-interface and logic devices with features
  • Selecting the Right Level Translation Solution (Rev. A)
    PDF, 313 Kb, Revision: A, Datei veröffentlicht: Jun 22, 2004
    Supply voltages continue to migrate to lower nodes to support today's low-power high-performance applications. While some devices are capable of running at lower supply nodes others might not have this capability. To haveswitching compatibility between these devices the output of each driver must be compliant with the input of the receiver that it is driving. There are several level-translati
  • Designing With Logic (Rev. C)
    PDF, 186 Kb, Revision: C, Datei veröffentlicht: Jun 1, 1997
    Data sheets which usually give information on device behavior only under recommended operating conditions may only partially answer engineering questions that arise during the development of systems using logic devices. However information is frequently needed regarding the behavior of the device outside the conditions in the data sheet. Such questions might be:?How does a bus driver behave w

Modellreihe

Serie: SN74ABT541B-Q1 (2)

Herstellerklassifikation

  • Semiconductors> Logic> Buffer/Driver/Transceiver> Non-Inverting Buffer/Driver