Datasheet Texas Instruments PTH12020LAST — Datenblatt

Hersteller	Texas Instruments
Serie	PTH12020L
Artikelnummer	PTH12020LAST

0,8 bis 1,8 V 18-A-, 12-V-Eingang Nicht isoliertes Weitwinkelmodul 10-Oberflächen-Montagemodul -40 bis 85

Datenblätter

Herunterladen

PDF, 813 Kb, Revision: I, Datei veröffentlicht: Mar 11, 2009

Auszug aus dem Dokument

PTH12020W/L
www.ti.com . SLTS208I вЂ“ MAY 2003 вЂ“ REVISED MARCH 2009 18-A, 12-V INPUT NON-ISOLATED WIDE-OUTPUT
ADJUST POWER MODULE
FEATURES APPLICATIONS Up to 18 A Output Current 12-V Input Voltage Wide-Output Voltage Adjust
(1.2 V to 5.5 V/(0.8 V to 1.8 V) Efficiencies up to 95% 195 W/in3 Power Density On/Off Inhibit Output Voltage Sense Pre-Bias Startup Under-Voltage Lockout Auto-Trackв„ў Sequencing Margin Up/Down Controls Output Over-Current Protection
(Non-Latching, Auto-Reset) Over-Temperature Protection Operating Temperature: вЂ“40В°C to 85В°C Point-of-Load Alliance (POLAв„ў) Compatible Safety Agency Approvals:
UL/IEC/CSA-22.2 60950-1 1 2 Complex multi-voltage, multi-processor
systems NOMINAL SIZE = 1.5 in x 0.87 in
(38,1 mm x 22,1 mm) DESCRIPTION
The PTH12020 series of non-isolated power modules offers OEM designers a combination of high performance,
small footprint, and industry leading features. As part of a new class of power modules, these products provide
designers with the flexibility to power the most complex multi-processor digital systems using off-the-shelf catalog
parts.
The series employs double-sided surface mount construction and provides highperformance step-down power
conversion for up to 18A of output current from a 12-V input bus voltage. The output voltage of the W-suffix parts
can be set to any value over the range, 1.2V to 5.5V. The L-suffix parts have an adjustment range of 0.8V to
1.8V. The output voltage is set using a single resistor.
This series includes Auto-Trackв„ў sequencing. Auto-Track sequencing simplifies the task of supply voltage
sequencing in a power system by enabling modules to track each other, or any external voltage, during power up
and power down. Other operating features include an on/off inhibit, output voltage adjust (trim), margin up/down
controls, and the ability to start up into an existing output voltage or prebias. For improved load regulation, an
output voltage sense is provided. A non-latching over-current trip and overtemperature shutdown feature protects
against load faults. …

Preise

Status

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	No

Verpackung

Pin	10
Package Type	EUL
Industry STD Term	Surface Mount Module
JEDEC Code	R-PDIP-B
Package QTY	200
Carrier	SMALL T&R
Width (mm)	22.1
Length (mm)	37.97
Thickness (mm)	8.75
Pitch (mm)	3.18
Max Height (mm)	9
Mechanical Data	Herunterladen

Parameter

Iout(Max)	18 A
Operating Temperature Range	-40 to 85 C
Package Size: mm2:W x L	10Surface Mount Module: 901 mm2: 23.11 x 38.99(Surface Mount Module),10Through-Hole Module: 901 mm2: 23.11 x 38.99(Through-Hole Module) PKG
Package Type	Open-Frame
Regulated Outputs	1
Soft Start	Fixed
Special Features	Enable,Output Discharge,Tracking
Vin(Max)	13.2 V
Vin(Min)	10.8 V
Vout(Max)	1.8 V
Vout(Min)	0.8 V

Öko-Plan

RoHS	Not Compliant

Anwendungshinweise

Herunterladen
New power modules improve surface-mount manufacturability
PDF, 1.1 Mb, Datei veröffentlicht: Jul 14, 2005
Herunterladen
High-Temperatures Soldering Requirements for Plug-in Power, Surface-Mount Pdts (Rev. A)
PDF, 112 Kb, Revision: A, Datei veröffentlicht: Aug 13, 2009

Modellreihe

Serie: PTH12020L (5)

PTH12020LAH PTH12020LAS PTH12020LAST PTH12020LAZ PTH12020LAZT

Herstellerklassifikation

Semiconductors > Power Management > Power Modules > Non-Isolated Module > Step-Down (Buck) Module