Datasheet Texas Instruments OPA170-EP — Datenblatt
| Hersteller | Texas Instruments |
| Serie | OPA170-EP |
Verbessertes Produkt 36-V-Einzelversorgung, Operationsverstärker mit geringem Stromverbrauch
Datenblätter
36-V Single Supply, Low Power Op-Amp datasheet
PDF, 1.4 Mb, Revision: A, Datei veröffentlicht: Dec 27, 2012
Auszug aus dem Dokument
Preise
Status
| OPA170ASDRLTEP | V62/12627-01XE | |
|---|---|---|
| Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes | Yes |
Verpackung
| OPA170ASDRLTEP | V62/12627-01XE | |
|---|---|---|
| N | 1 | 2 |
| Pin | 5 | 5 |
| Package Type | DRL | DRL |
| Industry STD Term | SOT-5X3 | SOT-5X3 |
| JEDEC Code | R-PDSO-N | R-PDSO-N |
| Package QTY | 250 | 250 |
| Carrier | SMALL T&R | SMALL T&R |
| Device Marking | DAQ | DAQ |
| Width (mm) | 1.2 | 1.2 |
| Length (mm) | 1.6 | 1.6 |
| Thickness (mm) | .55 | .55 |
| Pitch (mm) | .5 | .5 |
| Max Height (mm) | .6 | .6 |
| Mechanical Data | Herunterladen | Herunterladen |
Parameter
| Parameters / Models | OPA170ASDRLTEP | V62/12627-01XE |
|---|---|---|
| Additional Features | EMI Hardened | EMI Hardened |
| Architecture | CMOS | CMOS |
| CMRR(Min), dB | 87 | 87 |
| CMRR(Typ), dB | 120 | 120 |
| GBW(Typ), MHz | 1.2 | 1.2 |
| IIB(Max), pA | 15 | 15 |
| Iq per channel(Max), mA | 0.145 | 0.145 |
| Iq per channel(Typ), mA | 0.11 | 0.11 |
| Number of Channels | 1 | 1 |
| Offset Drift(Typ), uV/C | 0.3 | 0.3 |
| Operating Temperature Range, C | -40 to 150 | -40 to 150 |
| Output Current(Typ), mA | 17 | 17 |
| Package Group | SOT-5X3 | SOT-5X3 |
| Package Size: mm2:W x L, PKG | 5SOT-5X3: 3 mm2: 1.6 x 1.6(SOT-5X3) | 5SOT-5X3: 3 mm2: 1.6 x 1.6(SOT-5X3) |
| Rail-to-Rail | In to V-,Out | In to V-,Out |
| Rating | HiRel Enhanced Product | HiRel Enhanced Product |
| Slew Rate(Typ), V/us | 0.4 | 0.4 |
| Total Supply Voltage(Max), +5V=5, +/-5V=10 | 36 | 36 |
| Total Supply Voltage(Min), +5V=5, +/-5V=10 | 2.7 | 2.7 |
| Vn at 1kHz(Typ), nV/rtHz | 19 | 19 |
| Vos (Offset Voltage @ 25C)(Max), mV | 1.8 | 1.8 |
Öko-Plan
| OPA170ASDRLTEP | V62/12627-01XE | |
|---|---|---|
| RoHS | Compliant | Compliant |
Anwendungshinweise
- Compensate Transimpedance Amplifiers Intuitively (Rev. A)PDF, 69 Kb, Revision: A, Datei veröffentlicht: Mar 30, 2005
Transimpedance amplifiers are used to convert low-level photodiode currents to usable voltage signals. All too often, the amplifiers have to be empirically compensated to operate properly. The problem can be easily understood if one looks at all the elements involved. - Tuning in AmplifiersPDF, 44 Kb, Datei veröffentlicht: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, Datei veröffentlicht: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, Datei veröffentlicht: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
Modellreihe
Serie: OPA170-EP (2)
Herstellerklassifikation
- Semiconductors> Space & High Reliability> Amplifier> Operational Amplifiers