Datasheet Texas Instruments LMH6517 — Datenblatt
| Hersteller | Texas Instruments |
| Serie | LMH6517 |
Low Power, Low Noise IF und Baseband Dual 16-Bit-ADC-Treiber mit digital gesteuerter Verstärkung
Datenblätter
Low Pwr, Low Noise, IF& Basebnd, Dual 16-bit ADC Drvr w/Dig Cntrlld Gain datasheet
PDF, 1.5 Mb, Revision: K, Datei veröffentlicht: Mar 13, 2013
Auszug aus dem Dokument
Preise
Status
| LMH6517SQ/NOPB | LMH6517SQE/NOPB | LMH6517SQX/NOPB | |
|---|---|---|---|
| Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes | No | Yes |
Verpackung
| LMH6517SQ/NOPB | LMH6517SQE/NOPB | LMH6517SQX/NOPB | |
|---|---|---|---|
| N | 1 | 2 | 3 |
| Pin | 32 | 32 | 32 |
| Package Type | RTV | RTV | RTV |
| Industry STD Term | WQFN | WQFN | WQFN |
| JEDEC Code | S-PQFP-N | S-PQFP-N | S-PQFP-N |
| Package QTY | 1000 | 250 | 4500 |
| Carrier | LARGE T&R | SMALL T&R | LARGE T&R |
| Device Marking | L6517SQ | L6517SQ | L6517SQ |
| Width (mm) | 5 | 5 | 5 |
| Length (mm) | 5 | 5 | 5 |
| Thickness (mm) | .75 | .75 | .75 |
| Pitch (mm) | .5 | .5 | .5 |
| Max Height (mm) | .8 | .8 | .8 |
| Mechanical Data | Herunterladen | Herunterladen | Herunterladen |
Parameter
| Parameters / Models | LMH6517SQ/NOPB | LMH6517SQE/NOPB | LMH6517SQX/NOPB |
|---|---|---|---|
| Acl, min spec gain, V/V | 0.33 | 0.33 | 0.33 |
| BW @ Acl, MHz | 1200 | 1200 | 1200 |
| Max Gain, dB | 22 | 22 | 22 |
| Number of Channels | 2 | 2 | 2 |
| Operating Temperature Range, C | -40 to 85 | -40 to 85 | -40 to 85 |
| PGA/VGA | VGA | VGA | VGA |
| Package Group | WQFN | WQFN | WQFN |
| Package Size: mm2:W x L, PKG | 32WQFN: 25 mm2: 5 x 5(WQFN) | 32WQFN: 25 mm2: 5 x 5(WQFN) | 32WQFN: 25 mm2: 5 x 5(WQFN) |
| Slew Rate(Typ), V/us | 5000 | 5000 | 5000 |
| Vs(Max), V | 5.25 | 5.25 | 5.25 |
| Vs(Min), V | 4.5 | 4.5 | 4.5 |
Öko-Plan
| LMH6517SQ/NOPB | LMH6517SQE/NOPB | LMH6517SQX/NOPB | |
|---|---|---|---|
| RoHS | Compliant | Compliant | Compliant |
Anwendungshinweise
- AN-2235 Ckt Brd Design for LMH6517/21/22 & Other H-Sp IF/RF F Amp (Rev. A)PDF, 3.2 Mb, Revision: A, Datei veröffentlicht: May 1, 2013
High-bandwidth, high-performance amplifiers require care in board layout techniques in order to ensureoptimum performance. This paper will address the key components of PCB design for high-performanceamplifiers, including the new LMH6521 and LMH6522 DVGAs. - A Walk Along the Signal Path (High-Speed Signal Path)PDF, 461 Kb, Datei veröffentlicht: Mar 30, 2005
- Using High Speed Diff Amp to Drive ADCs (Rev. A)PDF, 175 Kb, Revision: A, Datei veröffentlicht: Apr 26, 2013
The right high speed differential amplifier will add flexibility to signal chains that include a high speedanalog-to-digital converter (ADC). A differential amplifier can provide signal conditioning such as singleended to differential conversion, impedance transformation, and gain or attenuation. - AN-1719 Noise Figure Analysis Fully Differential Amplifier (Rev. A)PDF, 97 Kb, Revision: A, Datei veröffentlicht: May 1, 2013
This application note provides noise figure analysis for fully differential amplifiers, including output noisecalculation and noise figure calculation.
Modellreihe
Serie: LMH6517 (3)
Herstellerklassifikation
- Semiconductors> Amplifiers> Programmable & Variable Gain Amplifiers (PGA/VGA)