Datasheet Texas Instruments LM392 — Datenblatt

HerstellerTexas Instruments
SerieLM392
Datasheet Texas Instruments LM392

Low-Power-Operationsverstärker und Spannungskomparator

Datenblätter

LM392 datasheet
PDF, 886 Kb, Datei veröffentlicht: Jan 3, 2006
Auszug aus dem Dokument

Preise

Status

LM392DLM392DG4LM392DGKRLM392DGKTLM392DGKTG4LM392DRLM392DRG4LM392PLM392PE4
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)
Manufacture's Sample AvailabilityYesYesNoYesYesNoNoNoNo

Verpackung

LM392DLM392DG4LM392DGKRLM392DGKTLM392DGKTG4LM392DRLM392DRG4LM392PLM392PE4
N123456789
Pin888888888
Package TypeDDDGKDGKDGKDDPP
Industry STD TermSOICSOICVSSOPVSSOPVSSOPSOICSOICPDIPPDIP
JEDEC CodeR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDIP-TR-PDIP-T
Package QTY75752500250250250025005050
CarrierTUBETUBELARGE T&RSMALL T&RSMALL T&RLARGE T&RLARGE T&RTUBETUBE
Device MarkingLM392LM392M7LM7LM7LLM392LM392LM392PLM392P
Width (mm)3.913.913333.913.916.356.35
Length (mm)4.94.93334.94.99.819.81
Thickness (mm)1.581.58.97.97.971.581.583.93.9
Pitch (mm)1.271.27.65.65.651.271.272.542.54
Max Height (mm)1.751.751.071.071.071.751.755.085.08
Mechanical DataHerunterladenHerunterladenHerunterladenHerunterladenHerunterladenHerunterladenHerunterladenHerunterladenHerunterladen

Parameter

Parameters / ModelsLM392D
LM392D
LM392DG4
LM392DG4
LM392DGKR
LM392DGKR
LM392DGKT
LM392DGKT
LM392DGKTG4
LM392DGKTG4
LM392DR
LM392DR
LM392DRG4
LM392DRG4
LM392P
LM392P
LM392PE4
LM392PE4
Additional FeaturesN/AN/AN/AN/AN/AN/AN/AN/AN/A
ArchitectureBipolarBipolarBipolarBipolarBipolarBipolarBipolarBipolarBipolar
CMRR(Min), dB656565656565656565
CMRR(Typ), dB707070707070707070
GBW(Typ), MHz111111111
Input Bias Current(Max), pA250000250000250000250000250000250000250000250000250000
Iq per channel(Max), mA111111111
Iq per channel(Typ), mA0.50.50.50.50.50.50.50.50.5
Number of Channels222222222
Offset Drift(Typ), uV/C777777777
Operating Temperature Range, C0 to 700 to 700 to 700 to 700 to 700 to 700 to 700 to 700 to 70
Output Current(Typ), mA161616161616161616
Package GroupSOICSOICVSSOPVSSOPVSSOPSOICSOICPDIPPDIP
Package Size: mm2:W x L, PKG8SOIC: 29 mm2: 6 x 4.9(SOIC)8SOIC: 29 mm2: 6 x 4.9(SOIC)8VSSOP: 15 mm2: 4.9 x 3(VSSOP)8VSSOP: 15 mm2: 4.9 x 3(VSSOP)8VSSOP: 15 mm2: 4.9 x 3(VSSOP)8SOIC: 29 mm2: 6 x 4.9(SOIC)8SOIC: 29 mm2: 6 x 4.9(SOIC)See datasheet (PDIP)See datasheet (PDIP)
Rail-to-RailIn to V-In to V-In to V-In to V-In to V-In to V-In to V-In to V-In to V-
RatingCatalogCatalogCatalogCatalogCatalogCatalogCatalogCatalogCatalog
Slew Rate(Typ), V/us0.10.10.10.10.10.10.10.10.1
Total Supply Voltage(Max), +5V=5, +/-5V=10323232323232323232
Total Supply Voltage(Min), +5V=5, +/-5V=10333333333
Vn at 1kHz(Typ), nV/rtHz383838383838383838
Vos (Offset Voltage @ 25C)(Max), mV555555555

Öko-Plan

LM392DLM392DG4LM392DGKRLM392DGKTLM392DGKTG4LM392DRLM392DRG4LM392PLM392PE4
RoHSCompliantCompliantCompliantCompliantCompliantCompliantCompliantCompliantCompliant
Pb FreeYesYes

Anwendungshinweise

  • AN-286 Applications of the LM392 Comparator Op Amp IC (Rev. B)
    PDF, 462 Kb, Revision: B, Datei veröffentlicht: Apr 26, 2013
    This application note discusses the uses of the LM339 quad comparator and the LM324 op amp areamong the most widely used linear ICs today. The combination of low cost, single or dual supply operationand ease of use has contributed to the wide range of applications for these devices.
  • AN-260 A 20-Bit (1 ppm) Linear Slope-Integrating A/D Converter (Rev. B)
    PDF, 502 Kb, Revision: B, Datei veröffentlicht: May 5, 2013
    This application report discusses how combining an “inferior”, 20 year old A/D conversion technique with amicroprocessor, a developmental A/D converter achieves 1 part-per-million (20-bit) linearity.
  • True RMS Detector
    PDF, 88 Kb, Datei veröffentlicht: Oct 1, 2002
  • AN-20 An Applications Guide for Op Amps (Rev. C)
    PDF, 727 Kb, Revision: C, Datei veröffentlicht: May 1, 2013
    This application note is a guide for Op Amps. The circuits discussed herein are illustrative of the versatilityof the integrated operational amplifier and provide a guide to a number of useful applications. Thecautions noted in each section will show the more common pitfalls encountered in amplifier usage.
  • AN-24 A Simplified Test Set for Op Amp Characterization
    PDF, 1.2 Mb, Datei veröffentlicht: May 10, 2004
    Application Note 24 A Simplified Test Set for Op Amp Characterization
  • AN-30 Log Converters (Rev. B)
    PDF, 370 Kb, Revision: B, Datei veröffentlicht: May 1, 2013
    One of the most predictable non-linear elements commonly available is the bipolar transistor. Therelationship between collector current and emitter base voltage is precisely logarithmic from currentsbelow one picoamp to currents above one milliamp. Using a matched pair of transistors and integratedcircuit operational amplifiers it is relatively easy to construct a linear to logarithmic conv
  • AN-29 IC Op Amp Beats FETs on Input Current (Rev. B)
    PDF, 965 Kb, Revision: B, Datei veröffentlicht: May 1, 2013
    This application note describes a monolithic operational amplifier which has input error currents in theorder of 100 pA over a в€’55В°C to 125В°C temperature range. Instead of FETs, the circuit used bipolartransistors with current gains of 5000 so that offset voltage and drift are not degraded. A powerconsumption of 1 mW at low voltage is also featured.A number of novel circuits that make use
  • AN-32 FET Circuit Applications
    PDF, 254 Kb, Datei veröffentlicht: May 10, 2004
  • AN-4 Monolithic Op Amp—The Universal Linear Component (Rev. B)
    PDF, 579 Kb, Revision: B, Datei veröffentlicht: May 1, 2013
    Operational amplifiers are undoubtedly the easiest and best way of performing a wide range of linearfunctions from simple amplification to complex analog computation. The cost of monolithic amplifiers isnow less than $2.00, in large quantities, which makes it attractive to design them into circuits where theywould not otherwise be considered. Yet low cost is not the only attraction of monoli
  • AN-31 Op Amp Circuit Collection (Rev. B)
    PDF, 2.3 Mb, Revision: B, Datei veröffentlicht: May 1, 2013
    This application report provides basic circuits of the Texas Instruments op amp collection.
  • AN-241 Working with High Impedance Op Amps
    PDF, 169 Kb, Datei veröffentlicht: May 3, 2004
    Application Note 241 Working with High Impedance Op Amps
  • AN-278 Designing with a New Super Fast Dual Norton Amplifier (Rev. B)
    PDF, 867 Kb, Revision: B, Datei veröffentlicht: Apr 23, 2013
    This application note provides new design ideas and discusses the positive impact of designing with theDual Norton amplifier.
  • AB-24 Bench Testing LM3900 and LM359 Input Parameters
    PDF, 142 Kb, Datei veröffentlicht: May 10, 2004
    Application Brief 24 Bench Testing LM3900 and LM359 Input Parameters
  • AN-446 A 150W IC Op Amp Simplifies Design of Power Circuits
    PDF, 782 Kb, Datei veröffentlicht: May 10, 2004
    Application Note 446 A 150W IC Op Amp Simplifies Design of Power Circuits
  • Building an Op Amp With Bipolar Transistors, A Historical Application Note (Rev. A)
    PDF, 1.2 Mb, Revision: A, Datei veröffentlicht: Sep 19, 2016
    It is well known that the voltage noise of an operational amplifier can be decreased by increasing the emitter currentof the input stage. The signal-to-noise ratio will be improved by the increase of bias, until the base current noise begins to dominate.
  • General Purpose Power Supply
    PDF, 94 Kb, Datei veröffentlicht: Oct 3, 2002
  • AN-A The Monolithic Operational Amplifier: A Tutorial Study
    PDF, 379 Kb, Datei veröffentlicht: May 11, 2004
  • Precise Tri-Wave Generation
    PDF, 80 Kb, Datei veröffentlicht: Oct 2, 2002
  • AN-46 The Phase Locked Loop IC as a Communication System Building Block
    PDF, 314 Kb, Datei veröffentlicht: May 14, 2004
  • Low Drift Amplifiers
    PDF, 71 Kb, Datei veröffentlicht: Oct 2, 2002
  • AN-79 IC Preamplifier Challenges Choppers on Drift (Rev. B)
    PDF, 940 Kb, Revision: B, Datei veröffentlicht: May 1, 2013
    Since the introduction of monolithic IC amplifiers there has been a continual improvement in DC accuracy.Bias currents have been decreased by 5 orders of magnitude over the past 5 years. Low offset voltagedrift is also necessary in a high accuracy circuits. This is evidenced by the popularity of low drift amplifiertypes as well as the requests for selected low-drift op amps. However until n
  • Predicting Op Amp Slew Rate Limited Response
    PDF, 139 Kb, Datei veröffentlicht: Oct 7, 2002
  • Audio Applications of Linear Integrated Circuits
    PDF, 272 Kb, Datei veröffentlicht: May 2, 2004
  • AN-262 Applying Dual and Quad FET Op Amps (Rev. B)
    PDF, 1.1 Mb, Revision: B, Datei veröffentlicht: May 6, 2013
    The availability of dual and quad packaged FET op amps offers the designer all the traditional capabilitiesof FET op amps including low bias current and speed and some additional advantages. The cost-peramplifieris lower because of reduced package costs. This means that more amplifiers are available toimplement a function at a given cost making design easier. At the same time the availab
  • Applying a New Precision Op Amp
    PDF, 421 Kb, Datei veröffentlicht: Oct 4, 2004
  • AN-263 Sine Wave Generation Techniques (Rev. C)
    PDF, 747 Kb, Revision: C, Datei veröffentlicht: Apr 22, 2013
    This application note describes the sine wave generation techniques to control frequency amplitude anddistortion levels.
  • Super Matched Bipolar Transistor Pair Sets New Standards for Drift and Noise (Rev. B)
    PDF, 966 Kb, Revision: B, Datei veröffentlicht: May 5, 2013
    This application report discusses how a super matched bipolar transistor pair sets new standards for driftand noise.
  • AN-480 A 40 MHz Programmable Video Op Amp
    PDF, 218 Kb, Datei veröffentlicht: May 11, 2004
  • AN-256 Circuitry for Inexpensive Relative Humidity Measurement (Rev. B)
    PDF, 262 Kb, Revision: B, Datei veröffentlicht: May 6, 2013
    Of all common environmental parameters humidity is perhaps the least understood and most difficult tomeasure. The most common electronic humidity detection methods albeit highly accurate are not obviousand tend to be expensive and complex (See Box). Accurate humidity measurement is vital to a number ofdiverse areas including food processing paper and lumber production pollution monitor
  • Get More Power Out of Dual or Quad Op-Amps
    PDF, 91 Kb, Datei veröffentlicht: Oct 2, 2002
  • Get Fast Stable Response From Improved Unity-Gain Followers
    PDF, 107 Kb, Datei veröffentlicht: Oct 2, 2002

Modellreihe

Herstellerklassifikation

  • Semiconductors> Amplifiers> Operational Amplifiers (Op Amps)> General-Purpose Op Amps