Datasheet Texas Instruments LM111-N — Datenblatt
| Hersteller | Texas Instruments |
| Serie | LM111-N |
Spannungskomparator
Datenblätter
LM111/LM211/LM311 Voltage Comparator datasheet
PDF, 1.7 Mb, Revision: E, Datei veröffentlicht: Mar 27, 2013
Auszug aus dem Dokument
Preise
Status
| LM111H | LM111H/NOPB | LM111J-8 | |
|---|---|---|---|
| Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes | Yes | No |
Verpackung
| LM111H | LM111H/NOPB | LM111J-8 | |
|---|---|---|---|
| N | 1 | 2 | 3 |
| Pin | 8 | 8 | 8 |
| Package Type | LMC | LMC | NAB |
| Industry STD Term | TO-CAN | TO-CAN | CDIP |
| JEDEC Code | O-MBCY-W | O-MBCY-W | R-CDIP-P |
| Package QTY | 500 | 500 | 40 |
| Device Marking | LM111H | LM111H | LM111J-8 |
| Width (mm) | 9.08 | 9.08 | 6.502 |
| Length (mm) | 9.08 | 9.08 | 10.16 |
| Thickness (mm) | 4.4 | 4.4 | 4.064 |
| Pitch (mm) | 2.54 | 2.54 | 2.54 |
| Max Height (mm) | 5.72 | 5.72 | 5.08 |
| Mechanical Data | Herunterladen | Herunterladen | Herunterladen |
| Carrier | TUBE |
Parameter
| Parameters / Models | LM111H | LM111H/NOPB | LM111J-8 |
|---|---|---|---|
| Input Bias Current (+/-)(Max), nA | 100 | 100 | 100 |
| Iq per channel(Max), mA | 6 | 6 | 6 |
| Number of Channels | 1 | 1 | 1 |
| Operating Temperature Range, C | -55 to 125 | -55 to 125 | -55 to 125 |
| Output Type | Open Collector, Open Drain | Open Collector, Open Drain | Open Collector, Open Drain |
| Package Group | TO-99 | TO-99 | CDIP |
| Package Size: mm2:W x L, PKG | 8TO-99: 80 mm2: 8.96 x 8.96(TO-99) | 8TO-99: 80 mm2: 8.96 x 8.96(TO-99) | See datasheet (CDIP) |
| Propagation Delay Time, uS | 0.2 | 0.2 | 0.2 |
| Rail-to-Rail | No | No | No |
| Rating | Catalog | Catalog | Catalog |
| Special Features | Strobe,Vos Adj Pin | Strobe,Vos Adj Pin | Strobe,Vos Adj Pin |
| VICR(Max), V | 34 | 34 | 34 |
| VICR(Min), V | 0.5 | 0.5 | 0.5 |
| Vos (Offset Voltage @ 25C)(Max), mV | 3 | 3 | 3 |
| Vs(Max), V | 36 | 36 | 36 |
| Vs(Min), V | 5 | 5 | 5 |
Öko-Plan
| LM111H | LM111H/NOPB | LM111J-8 | |
|---|---|---|---|
| RoHS | See ti.com | Compliant | See ti.com |
Anwendungshinweise
- Circuit Techniques for Avoiding Oscillations in Comparator ApplicationsPDF, 96 Kb, Datei veröffentlicht: Oct 2, 2002
- AN-46 The Phase Locked Loop IC as a Communication System Building BlockPDF, 314 Kb, Datei veröffentlicht: May 14, 2004
- Microvolt ComparatorPDF, 85 Kb, Datei veröffentlicht: Oct 2, 2002
- LB-12 An IC Voltage Comparator for High Impedance Circuitry (Rev. B)PDF, 140 Kb, Revision: B, Datei veröffentlicht: May 6, 2013
The IC voltage comparators available in the past have been designed primarily for low voltage, high-speedoperation. As a result, these devices have high input error currents, which limit their usefulness in highimpedance circuitry. An IC is described here that drastically reduces these error currents, with only amoderate decrease in speed. - AN-41 Precision IC Comparator Runs from +5V Logic Supply (Rev. B)PDF, 344 Kb, Revision: B, Datei veröffentlicht: May 1, 2013
In digital systems, it is sometimes necessary to convert low level analog signals into digital information. Anexample of this might be a detector for the illumination level of a photo-diode. Another would be a zerocrossing detector for a magnetic transducer such as a magnetometer or a shaft-position pickoff. Thesetransducers have low-level outputs, with currents in the low microamperes or vo
Modellreihe
Serie: LM111-N (3)
Herstellerklassifikation
- Semiconductors> Space & High Reliability> Amplifier> Comparator