Datasheet Texas Instruments DS90UB903QSQE/NOPB — Datenblatt
| Hersteller | Texas Instruments |
| Serie | DS90UB903Q-Q1 |
| Artikelnummer | DS90UB903QSQE/NOPB |
10 - 43 MHz 18-Bit-Farb-FPD-Link III-Serializer mit bidirektionalem Steuerkanal 40-WQFN -40 bis 105
Datenblätter
DS90UB903Q/4Q 10-43MHz 18-Bit Color FPD-Link III SER/DES datasheet
PDF, 1.0 Mb, Revision: E, Datei veröffentlicht: Apr 16, 2013
Auszug aus dem Dokument
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Verpackung
| Pin | 40 |
| Package Type | RTA |
| Industry STD Term | WQFN |
| JEDEC Code | S-PQFP-N |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Device Marking | UB903QSQ |
| Width (mm) | 6 |
| Length (mm) | 6 |
| Thickness (mm) | .75 |
| Pitch (mm) | .5 |
| Max Height (mm) | .8 |
| Mechanical Data | Herunterladen |
Parameter
| Color Depth | 18 bpp |
| Diagnostics | BIST |
| EMI Reduction | - |
| Function | Serializer |
| Input Compatibility | LVCMOS |
| Operating Temperature Range | -40 to 105 C |
| Output Compatibility | FPD-Link III LVDS |
| Package Group | WQFN |
| Package Size: mm2:W x L | 40WQFN: 36 mm2: 6 x 6(WQFN) PKG |
| Pixel Clock Min | 10 MHz |
| Pixel Clock(Max) | 43 MHz |
| Rating | Automotive |
| Signal Conditioning | - |
| Special Features | I2C Config |
| Total Throughput | 900 Mbps |
Öko-Plan
| RoHS | Compliant |
Anwendungshinweise
- Driving High-Speed Data Against the TrafficPDF, 828 Kb, Datei veröffentlicht: Jul 11, 2011
- I2C Communication Over FPD-Link III with Bidirectional Control Channel (Rev. A)PDF, 53 Kb, Revision: A, Datei veröffentlicht: Apr 26, 2013
This application note describes communication between devices using the FPD-Link III SerDes with a bidirectional control channel using I2C. The low latency bidirectional control interface allows the master I2C device to remotely control peripherals across the serial link.
Modellreihe
Serie: DS90UB903Q-Q1 (3)
- DS90UB903QSQ/NOPB DS90UB903QSQE/NOPB DS90UB903QSQX/NOPB
Herstellerklassifikation
- Semiconductors > Interface > FPD-Link SerDes > Display SerDes