Datasheet Texas Instruments DP83849C — Datenblatt

HerstellerTexas Instruments
SerieDP83849C
Datasheet Texas Instruments DP83849C

PHYTER DUAL Comm Temp Dual Port 10/100 Mbit / s Eth Phys Layer Transceiver

Datenblätter

PHYTER DUAL Commercial Temp Dual Port 10/100 Mb/s Ethernet Phy Layer X-ceiver datasheet
PDF, 952 Kb, Revision: D, Datei veröffentlicht: May 27, 2008
Auszug aus dem Dokument

Preise

Status

DP83849CVS/NOPBDP83849CVSX/NOPB
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)
Manufacture's Sample AvailabilityYesNo

Verpackung

DP83849CVS/NOPBDP83849CVSX/NOPB
N12
Pin8080
Package TypePFCPFC
Industry STD TermTQFPTQFP
JEDEC CodeS-PQFP-GS-PQFP-G
Package QTY1191000
Device MarkingDP83849CVSDP83849CVS
Width (mm)1212
Length (mm)1212
Thickness (mm)11
Pitch (mm).5.5
Max Height (mm)1.21.2
Mechanical DataHerunterladenHerunterladen
CarrierLARGE T&R

Parameter

Parameters / ModelsDP83849CVS/NOPB
DP83849CVS/NOPB
DP83849CVSX/NOPB
DP83849CVSX/NOPB
Cable Length, m137137
Datarate, Mbps10/10010/100
FunctionPHYPHY
InterfaceMII,RMII,SNIMII,RMII,SNI
JTAG1149.1NoNo
Operating Temperature Range, C0 to 700 to 70
Package GroupTQFPTQFP
Package Size: mm2:W x L, PKG80TQFP: 196 mm2: 14 x 14(TQFP)80TQFP: 196 mm2: 14 x 14(TQFP)
Port CountDualDual
RatingCatalogCatalog
Special FeaturesCable DiagnosticsCable Diagnostics
Supply Voltage, Volt3.33.3

Öko-Plan

DP83849CVS/NOPBDP83849CVSX/NOPB
RoHSCompliantCompliant

Anwendungshinweise

  • AN-1469 PHYTERВ® Design & Layout Guide (Rev. D)
    PDF, 289 Kb, Revision: D, Datei veröffentlicht: Apr 26, 2013
    This application report describes PHYTERв„ў design and layout guidelines.
  • AN-1508 DP83849 Cable Diagnostics (Rev. A)
    PDF, 454 Kb, Revision: A, Datei veröffentlicht: Apr 26, 2013
    This application report describes the features incorporated in the DP83849 for detecting cabling faults andmonitoring link status in a Twisted Pair cabling environment.
  • Reducing Radiated Emissions in Ethernet 10/100 LAN Applications (Rev. A)
    PDF, 70 Kb, Revision: A, Datei veröffentlicht: Apr 26, 2013
    This application report explains how Texas Instruments' PHYTER products help system designers toreduce radiated emissions in Ethernet 10/100 LAN applications.
  • AN-1509 PhyterDual Flexible Port Switching (Rev. B)
    PDF, 118 Kb, Revision: B, Datei veröffentlicht: Apr 26, 2013
    Texas Instruments flexible port switching offers an unprecedented number of ways for system designers todevelop solutions that address specific application needs with the minimum number of components. Thecombination of flexible assignment of data paths between ports and the ability to change theseassignments dynamically allow one part to meet many different needs. In addition to this flexibi
  • PHYTERВ® Family of High-Speed Industrial Connectivity Devices
    PDF, 153 Kb, Datei veröffentlicht: May 15, 2012
  • AN-1540 Power Measurement of Ethernet Physical Layer Products (Rev. B)
    PDF, 79 Kb, Revision: B, Datei veröffentlicht: Apr 26, 2013
    System designers require accurate component power consumption specifications, for the purposes of thermal management, component selection, and power distribution planning.
  • AN-1507 DP83848 and DP83849 100Mb Data Latency (Rev. B)
    PDF, 301 Kb, Revision: B, Datei veröffentlicht: Apr 26, 2013
    The purpose of this document is to define the 100Mb Transmit and Receive latencies of the TexasInstruments Semiconductor DP83848 and DP83849 Ethernet Transceiver family, and to document theircontributions for end-to-end packet transfer in both MII and RMII modes of operation.
  • AN-1548 PHYTER 100 Base-TX Reference Clock Jitter Tolerance (Rev. B)
    PDF, 126 Kb, Revision: B, Datei veröffentlicht: Apr 26, 2013
    The use of a reference clock that is less stable than those directly driven from an oscillator may be required for some applications. In addition, some customer applications may require partnering with devices that operate outside of the IEEE 802.3 standard for transmitted jitter.

Modellreihe

Herstellerklassifikation

  • Semiconductors> Interface> Ethernet