Datasheet Texas Instruments 5962-9075801MEA — Datenblatt

HerstellerTexas Instruments
SerieCD54HCT75
Artikelnummer5962-9075801MEA
Datasheet Texas Instruments 5962-9075801MEA

Hochgeschwindigkeits-CMOS-Logik Dual 2-Bit Bistable Transparent Latch 16-CDIP -55 bis 125

Datenblätter

CD54HC75, CD74HC75, CD54HCT75, CD74HCT75 datasheet
PDF, 694 Kb, Revision: F, Datei veröffentlicht: Oct 13, 2003
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Verpackung

Pin16
Package TypeJ
Industry STD TermCDIP
JEDEC CodeR-GDIP-T
Package QTY1
CarrierTUBE
Width (mm)6.92
Length (mm)19.56
Thickness (mm)4.57
Pitch (mm)2.54
Max Height (mm)5.08
Mechanical DataHerunterladen

Parameter

3-State OutputNo
Bits4
F @ Nom Voltage(Max)25 Mhz
ICC @ Nom Voltage(Max)0.04 mA
Input TypeTTL
Operating Temperature Range-55 to 125 C
Output Drive (IOL/IOH)(Max)4/-4 mA
Output TypeCMOS
Package GroupCDIP
Package Size: mm2:W x LSee datasheet (CDIP) PKG
RatingMilitary
Technology FamilyHCT
VCC(Max)5.5 V
VCC(Min)4.5 V
tpd @ Nom Voltage(Max)35 ns

Öko-Plan

RoHSSee ti.com

Anwendungshinweise

  • Semiconductor Packing Material Electrostatic Discharge (ESD) Protection
    PDF, 337 Kb, Datei veröffentlicht: Jul 8, 2004
    Forty-eight-pin TSSOP components that were packaged using Texas Instruments (TI) standard packing methodology were subjected to electrical discharges between 0.5 and 20 kV as generated by an IEC ESD simulator to determine the level of ISD protection provided by the packing materials. The testing included trays tape and reel and magazines. Additional units were subjected to the same discharge
  • Introduction to Logic
    PDF, 93 Kb, Datei veröffentlicht: Apr 30, 2015
  • Understanding and Interpreting Standard-Logic Data Sheets (Rev. C)
    PDF, 614 Kb, Revision: C, Datei veröffentlicht: Dec 2, 2015
  • Using High Speed CMOS and Advanced CMOS in Systems With Multiple Vcc
    PDF, 43 Kb, Datei veröffentlicht: Apr 1, 1996
    Though low power consumption is a feature of CMOS devices sometimes this feature does not meet a designer?s system power supply constraints. Therefore a partial system power down or multiple Vcc supplies are used to meet the needs of the system. This document shows electrostatic discharge protection circuits. It also provides circuit and bus driver examples of partial system power down and curren
  • SN54/74HCT CMOS Logic Family Applications and Restrictions
    PDF, 102 Kb, Datei veröffentlicht: May 1, 1996
    The TI SN54/74HCT family of CMOS devices is a subgroup of the SN74HC series with the HCT circuitry modified to meet the interfacing requirements of TTL outputs to high-speed CMOS inputs. The HCT devices can be driven by the TTL circuits directly without additional components. This document describes the TTL/HC interface the operating voltages circuit noise and power consumption. A Bergeron anal
  • Power-Up Behavior of Clocked Devices (Rev. A)
    PDF, 34 Kb, Revision: A, Datei veröffentlicht: Feb 6, 2015
  • Designing With Logic (Rev. C)
    PDF, 186 Kb, Revision: C, Datei veröffentlicht: Jun 1, 1997
    Data sheets which usually give information on device behavior only under recommended operating conditions may only partially answer engineering questions that arise during the development of systems using logic devices. However information is frequently needed regarding the behavior of the device outside the conditions in the data sheet. Such questions might be:?How does a bus driver behave w
  • CMOS Power Consumption and CPD Calculation (Rev. B)
    PDF, 89 Kb, Revision: B, Datei veröffentlicht: Jun 1, 1997
    Reduction of power consumption makes a device more reliable. The need for devices that consume a minimum amount of power was a major driving force behind the development of CMOS technologies. As a result CMOS devices are best known for low power consumption. However for minimizing the power requirements of a board or a system simply knowing that CMOS devices may use less power than equivale
  • Implications of Slow or Floating CMOS Inputs (Rev. D)
    PDF, 260 Kb, Revision: D, Datei veröffentlicht: Jun 23, 2016
  • TI IBIS File Creation Validation and Distribution Processes
    PDF, 380 Kb, Datei veröffentlicht: Aug 29, 2002
    The Input/Output Buffer Information Specification (IBIS) also known as ANSI/EIA-656 has become widely accepted among electronic design automation (EDA) vendors semiconductor vendors and system designers as the format for digital electrical interface data. Because IBIS models do not reveal proprietary internal processes or architectural information semiconductor vendors? support for IBIS con

Modellreihe

Serie: CD54HCT75 (2)

Herstellerklassifikation

  • Semiconductors > Space & High Reliability > Logic Products > Flip-Flop/Latch/Registers

Andere Namen:

59629075801MEA, 5962 9075801MEA