Datasheet Texas Instruments BQ76PL536A — Datenblatt
| Hersteller | Texas Instruments |
| Serie | BQ76PL536A |
Lithium-Ionen-Batteriemonitor und Sekundärschutz-IC für Elektro und Hybrid
Datenblätter
bq76PL536A 3-to-6 Series Cell Lithium-Ion Battery Monitor and Secondary Protection IC for Applications datasheet
PDF, 2.0 Mb, Revision: C, Datei veröffentlicht: Oct 19, 2016
Auszug aus dem Dokument
Preise
Status
| BQ76PL536APAPR | BQ76PL536APAPT | |
|---|---|---|
| Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes | No |
Verpackung
| BQ76PL536APAPR | BQ76PL536APAPT | |
|---|---|---|
| N | 1 | 2 |
| Pin | 64 | 64 |
| Package Type | PAP | PAP |
| Industry STD Term | HTQFP | HTQFP |
| JEDEC Code | S-PQFP-G | S-PQFP-G |
| Package QTY | 1000 | 250 |
| Carrier | LARGE T&R | SMALL T&R |
| Device Marking | BQ76PL536A | BQ76PL536A |
| Width (mm) | 10 | 10 |
| Length (mm) | 10 | 10 |
| Thickness (mm) | 1 | 1 |
| Pitch (mm) | .5 | .5 |
| Max Height (mm) | 1.2 | 1.2 |
| Mechanical Data | Herunterladen | Herunterladen |
Parameter
| Parameters / Models | BQ76PL536APAPR | BQ76PL536APAPT |
|---|---|---|
| Communication Interface | SPI | SPI |
| Function | Monitoring (Analog Front-End) | Monitoring (Analog Front-End) |
| Number of Series Cells, Max | 3 | 3 |
| Package Group | HTQFP | HTQFP |
| Protection Feature, s | Over-temperature (OT),Over-voltage (OV),Under-voltage (UV) | Over-temperature (OT),Over-voltage (OV),Under-voltage (UV) |
| Rating | Catalog | Catalog |
| Special Features | Cell Balancing,Integrated ADC,Programmable EEPROM or EPROM,Requires separate MCU,Stackable (built-in interface) | Cell Balancing,Integrated ADC,Programmable EEPROM or EPROM,Requires separate MCU,Stackable (built-in interface) |
| Typical Operating Current(Typ), uA | 45 | 45 |
| Vin(Max), V | 27 | 27 |
Öko-Plan
| BQ76PL536APAPR | BQ76PL536APAPT | |
|---|---|---|
| RoHS | Compliant | Compliant |
Anwendungshinweise
- Improving Communications With the bq76PL536PDF, 158 Kb, Datei veröffentlicht: Aug 11, 2010
The bq76PL536 is designed to communicate at high speed in noisy conditions present in automotive and industrial large-format battery applications. This document presents specific steps to maximize the integrity of communications with the bq76PL536 and reduce susceptibility to noise to a minimum, thereby reducing the bit-error rate to an acceptable level. - bq76PL536/536A/536AQ1 Communication Basics (Rev. B)PDF, 71 Kb, Revision: B, Datei veröffentlicht: Jul 5, 2011
This application report discusses the communication basics of addressing, reading, and writing for the Texas Instruments bq76PL536, a stackable 3-to-6 series battery pack protector and analog front end. - Multi-Cell Li-Ion Battery Management System Using MSP430F5529 and bq76PL536PDF, 118 Kb, Datei veröffentlicht: Dec 16, 2010
This application report explains the implementation of a multi-cell lithium-ion battery management system using an MSP430(tm) microcontroller and the bq76PL536. The battery manager is implemented using the standard evaluation boards for the MSP430 MCU and the bq76PL536.The bq76PL536 can be stacked vertically to monitor up to 192 cells without additional isolation components between ICs. A high-s
Modellreihe
Serie: BQ76PL536A (2)
Herstellerklassifikation
- Semiconductors> Power Management> Battery Management Products> Battery Monitor, Protection & Authentication Solutions