Datasheet Texas Instruments BQ27200DRKRG4 — Datenblatt

HerstellerTexas Instruments
SerieBQ27200
ArtikelnummerBQ27200DRKRG4

Einzelzellen-Li-Ionen- und Li-Pol-Batterie-Gasanzeige-IC mit I2C-Schnittstelle 10-VSON -20 bis 70

Datenblätter

Single-Cell Li-Ion and Li-Pol Battery Gas Gauge IC For Portable Applications datasheet
PDF, 1.4 Mb, Revision: D, Datei veröffentlicht: Feb 27, 2006
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusNRND (Not recommended for new designs)
Manufacture's Sample AvailabilityNo

Verpackung

Pin10
Package TypeDRK
Industry STD TermVSON
JEDEC CodeS-PDSO-N
Package QTY3000
CarrierLARGE T&R
Device Marking27200
Width (mm)3
Length (mm)4
Thickness (mm).88
Pitch (mm).5
Max Height (mm)1
Mechanical DataHerunterladen

Ersatz

ReplacementBQ27210DRKR
Replacement CodeF

Öko-Plan

RoHSCompliant

Design Kits und Evaluierungsmodule

  • Evaluation Modules & Boards: BQ27200EVM
    BQ27200 Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: BQ27X00-TESTER
    Test System for BQ27000 BQ27200 Based Circuit Boards
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: EV2300
    USB-Based PC Interface Board for Battery Fuel (Gas) Gauge Evaluation
    Lifecycle Status: Active (Recommended for new designs)

Anwendungshinweise

  • Configuring the bq27000/200 for Gas Gauge Applications
    PDF, 137 Kb, Datei veröffentlicht: Aug 29, 2005
    Users of the bq27000 and bq27200 ICs can program ten EEPROM locations to optimize setups for particular battery and host requirements. This application report describes how to configure these ICs for those requirements.
  • Using the bq27x00 With a Primary Cell Battery
    PDF, 42 Kb, Datei veröffentlicht: Dec 15, 2005
    The bq27x00 is an accurate coulomb counter and contains algorithms to dynamically compensate the available capacity for temperature and discharge rate. If direct drive from the gauge to an LED display is not required, the bq27x00 can be used as an accurate gas gauge solution for a primary cell battery. Although the bq27x00 was designed for a single-cell rechargeable lithium-ion or lithium-polymer
  • Multicell Li-Ion and Li-Pol Battery Gas-Gauge Application Using the bqJunior
    PDF, 58 Kb, Datei veröffentlicht: May 26, 2006
    The bqJuniorв„ў series of gas gauges are designed to operate from a single-cell, lithium-ion or lithium-polymer battery. Many applications that could benefit from using these gas gauges use two or more lithium cells in series, where the battery voltage exceeds the operating voltage for the bqJuniorв„ў gas gauges. This application report describes a low-component count solution for using th
  • Building a Superior Battery Monitor with the bq27x00
    PDF, 43 Kb, Datei veröffentlicht: Jun 20, 2005
    The bq27x00 is a complete gas gauge solution for lithium-ion and lithium-polymer batteries. The bq27x00 also has internal registers and control commands that enable the host to use it as a battery monitor. A battery gas gauge solution can be built one of two ways: ignore all algorithms built into the bq27x00 and use the primitive functions to build a fully customized solution, or use some of the h
  • Choosing Between Battery Gas Gauges & Monitors to Track Charge Availabilility
    PDF, 184 Kb, Datei veröffentlicht: Sep 27, 2005
    Some customers are unfamiliar with battery monitors or gas gauges for their handheld portable applications. The intent of this application report is to provide information about TI product families that are excellent options when selecting a battery gas gauge solution.
  • Complete battery-pack design for one- or two-cell portable applications
    PDF, 164 Kb, Datei veröffentlicht: Jul 17, 2006
  • ESD and RF Mitigation in Handheld Battery Pack Electronics
    PDF, 68 Kb, Datei veröffentlicht: Mar 6, 2008
    It is imperative to protect the electronics in a consumer-removable battery pack from ESD damage. Even an upset without permanent damage may be unacceptable to the end-user. Handheld equipment that contains a transmitter also may require protection to guard against improper measurement and/or upset due to the affect of the radio frequency (RF) on the circuitry. Because the RF field strength varies
  • Feature Set Comparison of bq27x00, bq27x10, bq27500, and bq27510 (Rev. A)
    PDF, 65 Kb, Revision: A, Datei veröffentlicht: Dec 2, 2008
    Feature Set Comparison of bq27x00, bq27x10, bq27500 and bq27510
  • Single Cell Gas Gauge Circuit Design
    PDF, 154 Kb, Datei veröffentlicht: Feb 22, 2008
  • Single Cell Impedance Track Printed-Circuit Board Layout
    PDF, 403 Kb, Datei veröffentlicht: Feb 22, 2008
    bq20z70/90 Printed-Circuit Board Layout Guide
  • MSP430 Microcontroller SW for Handheld Fuel Gauges and Battery Authentication (Rev. A)
    PDF, 350 Kb, Revision: A, Datei veröffentlicht: May 26, 2010
    MSP430, bq26100, bq26100EVM, bq26150, bq26150EVM, bq26500, bq27000, bq27000EVM, bq27200, b MSP430 Microcontroller Software for Handheld Fuel Gauge & Battery Authentication

Modellreihe

Serie: BQ27200 (2)

Herstellerklassifikation

  • Semiconductors > Power Management > Battery Management Products > Battery Fuel Gauge