Datasheet Texas Instruments MSP430TCH5EPWR — Datenblatt

Hersteller	Texas Instruments
Serie	MSP430TCH5E
Artikelnummer	MSP430TCH5EPWR

Datenblätter

Preise

Status

Verpackung

Öko-Plan

Design Kits und Evaluierungsmodule

• Evaluation Modules & Boards: DRV2603EVM-CT
  DRV2603 Evaluation Module
  Lifecycle Status: Active (Recommended for new designs)
  
  • Herunterladen
• Evaluation Modules & Boards: DRV8601ZQVEVM
  DRV8601ZQVEVM Evaluation Module
  Lifecycle Status: Active (Recommended for new designs)
  
  • Herunterladen
• Evaluation Modules & Boards: DRV2605EVM-CT
  DRV2605EVM-CT ERM/LRA Haptic Driver Evaluation
  Lifecycle Status: Active (Recommended for new designs)
  
  • Herunterladen
• Evaluation Modules & Boards: MSP-TS430PW28A
  MSP-TS430PW28A - 28-pin Target Development Board for MSP430F2x and MSP430G2x MCUs
  Lifecycle Status: Active (Recommended for new designs)
  
  • Herunterladen
• JTAG Emulators/ Analyzers: ENERGYTRACE
  MSP EnergyTrace Technology
  Lifecycle Status: Active (Recommended for new designs)
  
  • Herunterladen

Anwendungshinweise

• Herunterladen
  Haptics and Capacitive Touch Using the MSP430TCH5E: the HapTouch BoosterPack
  PDF, 2.2 Mb, Datei veröffentlicht: Dec 9, 2013
• Herunterladen
  10-cm Capacitive Proximity Detection With MSP430 Microcontrollers (Rev. A)
  PDF, 1.8 Mb, Revision: A, Datei veröffentlicht: Jul 8, 2013
  The PinOsc feature of the MSP430 microcontroller value line family provides a simple and straight forward mechanism to measure capacitance. The PinOsc feature not only allows for touch detection but also provides enough sensitivity to support proximity applications. This application report demonstrates a 10+-cm proximity detection BoosterPack design solution. The software uses the PinOsc feature a
• Herunterladen
  Wireless Remote Controller With Capacitive Touch Pad Using MSP430F51x2 (Rev. A)
  PDF, 2.7 Mb, Revision: A, Datei veröffentlicht: May 17, 2012
  This application report describes the implementation of a two-dimensional capacitive touch pad, using the high-resolution Timer D of the MSP4305132 MCU.
• Herunterladen
  Capacitive Touch Sensing and SYS/BIOS
  PDF, 324 Kb, Datei veröffentlicht: Sep 12, 2012
  SYS/BIOS is designed for use in embedded applications that need real-time scheduling, synchronization, and instrumentation. It provides preemptive multitasking, hardware abstraction, and memory management.This application report uses an adaptation of the capacitive touch library to interface with SYS/BIOS. Thisinterface abstracts the capacitive touch interface, promoting use of the graphical c
• Herunterladen
  Capacitive Touch Sensing, MSP430 Button Gate Time Optimization and Tuning Guide
  PDF, 1.1 Mb, Datei veröffentlicht: May 21, 2013
  MSP430в„ў microcontroller based capacitive touch buttons can offer increased performance when properly optimized and tuned for their specific application. Performance benefits that result from button optimization can include, but are not limited to, decreased power consumption, improved response time, and the ability to grow a design to include more buttons. This application report provides th
• Herunterladen
  Capacitive Touch Sensing, MSP430 Slider and Wheel Tuning Guide
  PDF, 1.0 Mb, Datei veröffentlicht: May 21, 2013
  This application report provides guidelines on how to tune capacitive touch sliders and wheels running on the MSP430в„ў microcontrollers. It identifies the hardware and software parameters as well as explains the steps used in tuning sliders and wheels.The slider and wheel tuning is based on the APIs defined within the Capacitive Touch Sense Library (CAPSENSELIBRARY).
• Herunterladen
  Capacitive Touch Hardware Design Guide (Rev. A)
  PDF, 784 Kb, Revision: A, Datei veröffentlicht: Nov 17, 2015
  Capacitive touch detection is sometimes considered more art than science. This often results in multiple design iterations before the optimum performance is achieved. There are, however, good design practices for circuit layout and principles of materials that need to be understood to keep the number of iterations to a minimum. This design guide describes a process for creating and designing capac
• Herunterladen
  1-uA Capacitive Grip Detection Based on MSP430 Microcontrollers (Rev. B)
  PDF, 373 Kb, Revision: B, Datei veröffentlicht: Aug 14, 2013
  This application report discusses how to design a simple and ultra low-power grip detector BoosterPack for the MSP430 LaunchPadв„ў. The PINOSC feature in every msp430G2xx2 and msp430G2xx3 device makes it possible to eliminate all the external components when implementing a capacitive touch design. All the components used in the grip detector, such as capacitive sensors, LEDs are all integrate

Modellreihe

Herstellerklassifikation

• Semiconductors > Microcontrollers (MCU) > MSP430 ultra-low-power MCUs > MSP430F5x/6x