Datasheet Texas Instruments OPA541APG3 — Datenblatt

HerstellerTexas Instruments
SerieOPA541
ArtikelnummerOPA541APG3
Datasheet Texas Instruments OPA541APG3

Monolithischer Hochleistungs-Operationsverstärker 11-TO-220 -25 bis 85

Datenblätter

OPA541 High Power Monolithic Operational Amplifier datasheet
PDF, 409 Kb, Revision: B, Datei veröffentlicht: Apr 7, 2015
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Verpackung

Pin11
Package TypeKV
Industry STD TermTO-220
JEDEC CodeR-PZFM-T
Package QTY25
CarrierTUBE
Device MarkingOPA541AP
Width (mm)10.7
Length (mm)20.02
Thickness (mm)4.5
Pitch (mm)1.7
Max Height (mm)4.62
Mechanical DataHerunterladen

Parameter

Additional FeaturesAdj Current Limit
ArchitectureFET
CMRR(Min)95 dB
CMRR(Typ)113 dB
GBW(Typ)2 MHz
Input Bias Current(Max)50 pA
Iq per channel(Max)25 mA
Iq per channel(Typ)20 mA
Number of Channels1
Offset Drift(Typ)15 uV/C
Operating Temperature Range-25 to 85 C
Output Current(Typ)10000 mA
Package GroupTO-220
Package Size: mm2:W x LSee datasheet (TO-220) PKG
Rail-to-RailNo
RatingCatalog
Slew Rate(Typ)10 V/us
Total Supply Voltage(Max)70 +5V=5, +/-5V=10
Total Supply Voltage(Min)20 +5V=5, +/-5V=10
Vos (Offset Voltage @ 25C)(Max)1 mV

Öko-Plan

RoHSCompliant

Design Kits und Evaluierungsmodule

  • Evaluation Modules & Boards: OPAMPEVM
    Universal Operational Amplifier Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

Anwendungshinweise

  • Improve OPA541 Current-Limit Stability
    PDF, 31 Kb, Datei veröffentlicht: Oct 2, 2000
    OPA541 is the industry's highest performance monolithic power amplifier. It can operate on В±40V power supplies and put out 5A continuously (10A peak). Internal current-limit circuitry can be user-programmed with a single external resistor to protect the amplifier and load from fault conditions.
  • Mounting Considerations for TO-3 Packages
    PDF, 73 Kb, Datei veröffentlicht: Sep 27, 2000
    Proper mounting of TO-3 packages is required to assure rated performance and reliability. Although the procedures are simple, ignoring them can result in poor performance and catastrophic failure of the device.
  • MTTF, Failrate, Reliability, and Life Testing
    PDF, 51 Kb, Datei veröffentlicht: Oct 4, 2000
    At Burr-Brown, we characterize and qualify the reliability of our devices through high temperature life testing. The results of this testing are quantified with such values as MTTF and failure rate. This information can be very valuable when used for comparative purposes or applied to reliablility calculations. However, this information loses its worth if it is not precisely understood and appropr
  • Power Amplifier Stress and Power Handling Limitations
    PDF, 55 Kb, Datei veröffentlicht: Sep 27, 2000
    To achieve reliable power amplifier designs you must consider the stress on the amplifier compared to its power handling limitations. Power handling limits are specified by the Safe Operating Area (SOA) curves of the power amp. Stress on the amplifier depends on amplifier load and signal conditions which can be evaluated with straightforward techniques.

Modellreihe

Herstellerklassifikation

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Power Op Amps