Datasheet Texas Instruments LMH6611MKE/NOPB — Datenblatt

HerstellerTexas Instruments
SerieLMH6611
ArtikelnummerLMH6611MKE/NOPB
Datasheet Texas Instruments LMH6611MKE/NOPB

Einzelversorgung 345 MHz Rail-to-Rail-Ausgangsverstärker 6-SOT-23-THIN -40 bis 125

Datenblätter

LMH6611/LMH6612 Single Supply 345 MHz Rail-to-Rail Output Amplifiers datasheet
PDF, 2.6 Mb, Revision: K, Datei veröffentlicht: Oct 9, 2013
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Verpackung

Pin6
Package TypeDDC
Industry STD TermSOT-23-THIN
JEDEC CodeR-PDSO-G
Package QTY250
CarrierSMALL T&R
Device MarkingAX4A
Width (mm)1.6
Length (mm)2.9
Thickness (mm).87
Pitch (mm).95
Max Height (mm)1.1
Mechanical DataHerunterladen

Parameter

2nd Harmonic82 dBc
3rd Harmonic80 dBc
@ MHz5
Acl, min spec gain1 V/V
Additional FeaturesShutdown
ArchitectureBipolar,Voltage FB
BW @ Acl365 MHz
CMRR(Min)79 dB
CMRR(Typ)98 dB
GBW(Typ)365 MHz
Input Bias Current(Max)10100000 pA
Iq per channel(Max)3.8 mA
Iq per channel(Typ)3.3 mA
Number of Channels1
Offset Drift(Typ)4 uV/C
Operating Temperature Range-40 to 125 C
Output Current(Typ)120 mA
Package GroupSOT-23-THIN
Package Size: mm2:W x L6SOT-23-THIN: 8 mm2: 2.8 x 2.9(SOT-23-THIN) PKG
Rail-to-RailIn to V-,Out
RatingCatalog
Slew Rate(Typ)460 V/us
Total Supply Voltage(Max)11 +5V=5, +/-5V=10
Total Supply Voltage(Min)2.7 +5V=5, +/-5V=10
Vn at 1kHz(Typ)10 nV/rtHz
Vn at Flatband(Typ)10 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)1.5 mV

Öko-Plan

RoHSCompliant

Design Kits und Evaluierungsmodule

  • Evaluation Modules & Boards: 551600083-001
    Single to Single ADC Driver PCB for LMH6611 and LMH6618 (SOT23 package, unstuffed)
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: LMH730216
    Evaluation Board for High-Speed Single Op Amp in the 5- 6-Pin SOT-23 Package
    Lifecycle Status: Active (Recommended for new designs)

Anwendungshinweise

  • AN-1803 Design Considerations for a Transimpedance Amplifier (Rev. A)
    PDF, 103 Kb, Revision: A, Datei veröffentlicht: May 1, 2013
    It is challenging to design a good current-to-voltage (transimpedance) converter using a voltage-feedbackamplifier (VFA). By definition, a photodiode produces either a current or voltage output from exposure tolight. The transimpedance amplifier (TIA) is utilized to convert this low-level current to a usable voltagesignal and the TIA often needs to be compensated for proper operation. This a

Modellreihe

Serie: LMH6611 (3)

Herstellerklassifikation

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)