Datasheet Texas Instruments TLV2770CP — Datenblatt

HerstellerTexas Instruments
SerieTLV2770
ArtikelnummerTLV2770CP
Datasheet Texas Instruments TLV2770CP

Einzelner 2,7-V-Operationsverstärker mit hoher Anstiegsgeschwindigkeit von Schiene zu Schiene mit Abschaltung 8-PDIP 0 bis 70

Datenblätter

2.7-V High-Slew-Rate Rail-to-Rail Output Op Amps w/ Shutdown datasheet
PDF, 2.5 Mb, Revision: G, Datei veröffentlicht: Feb 23, 2004
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Verpackung

Pin8
Package TypeP
Industry STD TermPDIP
JEDEC CodeR-PDIP-T
Package QTY50
CarrierTUBE
Device MarkingTLV2770C
Width (mm)6.35
Length (mm)9.81
Thickness (mm)3.9
Pitch (mm)2.54
Max Height (mm)5.08
Mechanical DataHerunterladen

Parameter

Additional FeaturesShutdown
ArchitectureCMOS
CMRR(Min)60 dB
CMRR(Typ)96 dB
GBW(Typ)5.1 MHz
Input Bias Current(Max)60 pA
Iq per channel(Max)2 mA
Iq per channel(Typ)1 mA
Number of Channels1
Offset Drift(Typ)2 uV/C
Operating Temperature Range-40 to 125,0 to 70 C
Output Current(Typ)40 mA
Package GroupPDIP
Package Size: mm2:W x LSee datasheet (PDIP) PKG
Rail-to-RailIn to V-,Out
RatingCatalog
Slew Rate(Typ)10.5 V/us
Total Supply Voltage(Max)5.5 +5V=5, +/-5V=10
Total Supply Voltage(Min)2.5 +5V=5, +/-5V=10
Vn at 1kHz(Typ)17 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)2.5 mV

Öko-Plan

RoHSCompliant
Pb FreeYes

Design Kits und Evaluierungsmodule

  • Evaluation Modules & Boards: OPAMPEVM
    Universal Operational Amplifier Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

Anwendungshinweise

  • TLV277x/TLV277xA EMI Immunity Performance
    PDF, 284 Kb, Datei veröffentlicht: Dec 20, 2012
  • Stability Analysis Of Voltage-Feedback Op Amps Including Compensation Technique (Rev. A)
    PDF, 197 Kb, Revision: A, Datei veröffentlicht: Mar 12, 2001
    This report presents an analysis of the stability of voltage-feedback operational amplifiers (op amps) using circuit performance as the criteria to attain a successful design. It discusses several compensation techniques for op amps with and without internal compensation.
  • Conditioning a Switch-mode Power Supply Current Signal Using TI Op Amps
    PDF, 61 Kb, Datei veröffentlicht: Mar 23, 2000
    The switch-mode power supply primary current is often sensed using a power resistor. Using an op amp to amplify the current-sense signal can reduce cost and improve noise performance and efficiency. This report reviews the advantages of using an op amp circuit and analyzes the design criteria needed to choose the proper op amp.
  • Use of Rail-to-Rail Operational Amplifiers (Rev. A)
    PDF, 159 Kb, Revision: A, Datei veröffentlicht: Dec 22, 1999
    This application report assists design engineers to understand the functionality and benefits of rail-to-rail operational amplifiers. It shows simplified schematics, functions, and characteristics of the input and output stages. Typical application schematics for rail-to-rail operational amplifiers are also discussed.

Modellreihe

Herstellerklassifikation

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps