Datasheet Texas Instruments TPS54610PWP — Datenblatt

HerstellerTexas Instruments
SerieTPS54610
ArtikelnummerTPS54610PWP
Datasheet Texas Instruments TPS54610PWP

3V bis 6V Eingang, 6A Synchron-Abwärtswandler 28-HTSSOP -40 bis 85

Datenblätter

TPS54610 3-V to 6-V Input, 6-A Output Synchronous Buck PWM Switcher with Integrated FETs (SWIFTв„ў) datasheet
PDF, 1.1 Mb, Revision: G, Datei veröffentlicht: Oct 28, 2015
Auszug aus dem Dokument

Preise

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Verpackung

Pin28
Package TypePWP
Industry STD TermHTSSOP
JEDEC CodeR-PDSO-G
Package QTY50
CarrierTUBE
Device MarkingTPS54610
Width (mm)4.4
Length (mm)9.7
Thickness (mm)1
Pitch (mm).65
Max Height (mm)1.2
Mechanical DataHerunterladen

Parameter

Control ModeVoltage Mode
Duty Cycle(Max)90 %
Iout(Max)6 A
Iq(Typ)11 mA
Operating Temperature Range-40 to 85 C
Package GroupHTSSOP
RatingCatalog
Regulated Outputs1
Special FeaturesEnable,Frequency Synchronization,Power Good,Synchronous Rectification
Switching Frequency(Max)700 kHz
Switching Frequency(Min)280 kHz
TypeConverter
Vin(Max)6 V
Vin(Min)3 V
Vout(Max)4.5 V
Vout(Min)0.9 V

Öko-Plan

RoHSCompliant

Design Kits und Evaluierungsmodule

  • Evaluation Modules & Boards: TPS54610EVM-213
    6-A, 3-6 Vin DC/DC Converter with Ceramic Capacitors & Adjustable Output
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: TPS54610EVM-192
    6-A, 3-6 Vin DC/DC Converter with Adjustable Output Down to 0.9V
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: TPS54680EVM
    6-A DC/DC Converter with Simultaneous Sequencing of Multiple Voltages
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: XILINXPWR-082
    XILINXPWR-082 Power Management Evaluation Module for Xilinx FPGAs
    Lifecycle Status: Active (Recommended for new designs)

Anwendungshinweise

  • Designing With the TPS54610 Synchronous Buck Regulator (Rev. A)
    PDF, 354 Kb, Revision: A, Datei veröffentlicht: Feb 25, 2002
    The SWIFTв„ў TPS54610 externally compensated synchronous buck regulator makes designing a power solution quick and easy. The SWIFT Designer softwre tool is a resource that can greatly reduce design time by providing a complete power supply solution with only a few clicks of a mouse. The design methods presented in this application note are similar to the design methods used by the SWIFT Desi
  • Power for V5’s Transceiver using DC/DC Converters with Integrated FETs
    PDF, 89 Kb, Datei veröffentlicht: Sep 4, 2007
    This power supply was designed to power the transceivers in the Xilinxв„ў Virtexв„ў-5 LXT and FXT platforms.
  • Designing for Small-Size, High-Freq Applications Using TPS546xx DC/DC Converters
    PDF, 646 Kb, Datei veröffentlicht: Oct 19, 2001
    This application report describes the design procedure for a small-size, high frequency application using SWIFTВ™ synchronous buck regulators. It shows that the compensation circuitry of the regulators, with the minimum size output filter and fast transient response, provides the 150-kHz unity gain bandwidth of the open feedback loop. The design is illustrated by the 6-A, DDR memory VTT track
  • Simultaneous power-down sequencing with the TPS74x01 family of linear regulators
    PDF, 312 Kb, Datei veröffentlicht: Aug 10, 2007
  • Optimizing the Layout of the TPS546xx for Thermal Performance (Rev. A)
    PDF, 240 Kb, Revision: A, Datei veröffentlicht: Feb 8, 2002
    This application report examines the thermal performance of different layout techniques for the TPS5461x family of 6-amp synchronous buck regulators. The TPS5461x family consists of the TPS54610, TPS54611, TPS54612, TPS54613, TPS54615, and the TPS54616. The TPS54610 has an adjustable output voltage, while the output voltages of the other devices in this family are fixed. This application note is a
  • Dual Output Power Supply Sequencing for High Performance Processors
    PDF, 6.0 Mb, Datei veröffentlicht: Jul 17, 2002
    Dual voltage power supply architectures are becoming commonplace in high performance microprocessor and digital signal processor (DSP) systems. To save power and increase processing speeds, processor cores have smaller geometry cells and require lower supply voltages than the system bus voltages. Power management in these systems requires special attention. Yesterday's power management ICs and app
  • Q3 2007 Issue Analog Applications Journal
    PDF, 617 Kb, Datei veröffentlicht: Aug 10, 2007
  • Thermal Performance of SWIFT(TM) DC/DC Converters in the 28-Pin HTSSOP Package
    PDF, 267 Kb, Datei veröffentlicht: Feb 4, 2005
    The thermal management of printed-circuit boards is complex, but must be well understood to achieve optimum performance and reliability. SWIFT(TM) dc/dc converters in the 28-pin HTSSOP package rely on an exposed lead frame die pad [PowerPAD(TM)] on the bottom of the package to provide an extremely low thermal resistance from junction to case. The thermal performance of the 6-, 9-, and 14-A SWIFT d
  • Using Low Voltage SWIFT DC/DC Converters with Ceramic Capacitors
    PDF, 490 Kb, Datei veröffentlicht: Jan 8, 2003
    This application note investigates an adequate phase margin for stable operation of SWIFTв„ў regulators with the ceramic capacitors at worst-case tolerances of regulator and external parts. TI also shows how the bandwidth and gain of feedback loop impact on load-current transient-response characteristics. Measurements and analysis have shown that the voltage-mode control SWIFTв„ў regulat

Modellreihe

Serie: TPS54610 (4)

Herstellerklassifikation

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)