Datasheet Texas Instruments LMH6628MA — Datenblatt
| Hersteller | Texas Instruments |
| Serie | LMH6628 |
| Artikelnummer | LMH6628MA |
Dual-Breitband, rauscharm, Spannungsrückkopplungs-Operationsverstärker 8-SOIC -40 bis 85
Datenblätter
LMH6628 Dual Wideband, Low Noise, Voltage Feedback Op Amp datasheet
PDF, 1.1 Mb, Revision: D, Datei veröffentlicht: Mar 15, 2013
Auszug aus dem Dokument
Preise
Status
| Lifecycle Status | NRND (Not recommended for new designs) |
| Manufacture's Sample Availability | No |
Verpackung
| Pin | 8 | 8 |
| Package Type | D | D |
| Industry STD Term | SOIC | SOIC |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 95 | 95 |
| Carrier | TUBE | TUBE |
| Device Marking | 28MA | LMH66 |
| Width (mm) | 3.91 | 3.91 |
| Length (mm) | 4.9 | 4.9 |
| Thickness (mm) | 1.58 | 1.58 |
| Pitch (mm) | 1.27 | 1.27 |
| Max Height (mm) | 1.75 | 1.75 |
| Mechanical Data | Herunterladen | Herunterladen |
Ersatz
| Replacement | LMH6628MA/NOPB |
| Replacement Code | S |
Parameter
| 2nd Harmonic | 65 dBc |
| 3rd Harmonic | 74 dBc |
| @ MHz | 10 |
| Acl, min spec gain | 1 V/V |
| Additional Features | N/A |
| Architecture | Bipolar,Voltage FB |
| BW @ Acl | 300 MHz |
| CMRR(Min) | 57 dB |
| CMRR(Typ) | 62 dB |
| GBW(Typ) | 300 MHz |
| Input Bias Current(Max) | 20000000 pA |
| Iq per channel(Max) | 12.5 mA |
| Iq per channel(Typ) | 9 mA |
| Number of Channels | 2 |
| Offset Drift(Typ) | 5 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 85 mA |
| Package Group | SOIC |
| Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 550 V/us |
| Total Supply Voltage(Max) | 12 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 5 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 2 nV/rtHz |
| Vn at Flatband(Typ) | 2 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 2 mV |
Öko-Plan
| RoHS | See ti.com |
Anwendungshinweise
- Transimpedance Amplifiers (TIA): Choosing the Best Amplifier for the job (Rev. A)PDF, 153 Kb, Revision: A, Datei veröffentlicht: May 16, 2017
This application note is intended as a guide for the designer looking to amplify the small signal from a photodiode or avalanche diode so that it would be large enough for further processing (e.g. data acquisition) or to trigger some other event in a system. The challenge in doing so, as always, is to not degrade the signal such that it becomes indistinguishable from random noi
Modellreihe
Serie: LMH6628 (3)
- LMH6628MA LMH6628MA/NOPB LMH6628MAX/NOPB
Herstellerklassifikation
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)